[9fans] LinkSys EtherFast 10/100 settings?

[9fans] LinkSys EtherFast 10/100 settings?

[John E. Barham]

[-- Attachment #1: Type: text/plain, Size: 353 bytes --]

I've got a LinkSys EtherFast 10/100 PCI card.  Model # is LNE100TX-CA, version 4.1.  So far I've tried both ETHER0=type=ec2t and 2114x (based on previous posts) to no avail.

When it boots up, ndb/dns complains about not having an IP address.  (I have a DHCP server running on the LAN which works fine w/ Win98/2k).  Any ideas?  Thanks in advance...

[-- Attachment #2: Type: text/html, Size: 792 bytes --]

Re: [9fans] LinkSys EtherFast 10/100 settings?

[User Dormane]

> "John E. Barham" wrote:
> 
> I've got a LinkSys EtherFast 10/100 PCI card.  Model # is LNE100TX-CA,
> version 4.1.  So far I've tried both ETHER0=type=ec2t and 2114x (based
> on previous posts) to no avail.
> 
> When it boots up, ndb/dns complains about not having an IP address.
> (I have a DHCP server running on the LAN which works fine w/
> Win98/2k).  Any ideas?  Thanks in advance...

That card probably has an 82c168 "PNIC" chip on it so neither of those 
types will work.  Believe me, it sucks (look at the FreeBSD driver for 
all of the hackarounds for chip bugs).  I have two of those and even 
Linux-2.4 with all their elves plinking on it I can't get crap rate 
through it, unlike the 21140 I have (at least when I tried it last).

Eric Dorman

Re: [9fans] LinkSys EtherFast 10/100 settings?

[Don]

> I've got a LinkSys EtherFast 10/100 PCI card.  Model # is LNE100TX-CA,
> version 4.1.  So far I've tried both ETHER0=type=ec2t and 2114x
> (based on previous posts) to no avail.
Hello,
    Did you try: http://www.acl.lanl.gov/plan9/ec2t/index.html ?
Don
north_@www.7f.no-ip.info
http://www.7f.no-ip.com

[9fans] ndb/dns & mbr boot problem

[?????? ?????]

[-- Attachment #1: Type: text/plain, Size: 969 bytes --]

Hi all, 
I installed Plan 9 distribution succesfully (into 400 mb partition & boot from win9x menu), but when it boots up I see 

kfs ... boot: nop ... time
int: starting /bin/rc
ndb/dns: can`t read my ip address
disk/fdisk: did not find master boot record

What must I do?
Thanks in advance...

My hardware is:
Pentium 166 MMX
S3 86C775/86C785 Video BIOS
YAMAHA DX-XG PCI audio
64 mb RAM
Seagate IDE HDD 3098 mb
Topic 56k Internal Data Fax Voice Modem
and other

And this is my /sys/lib/pcdist/bin/386/pci file:

bus   dev     type     uid      did     intl       memory
0     0/0     0600     10b8     1531    0 
0     2/0     0601     10b9     1533    0
0     3/0     0401     1073     000d    11         0:05100000  32768
0     4/0     0780     151f     0000    10         0:00007001  16
0     5/0     0300     5333     8901    9          0:08000000  67108864
0     11/0    0101     10b9     5229    256        0:00007021  16

-ask


[-- Attachment #2: Type: text/html, Size: 3745 bytes --]

Re: [9fans] ndb/dns & mbr boot problem

[Russ Cox]

How long did you wait?
ndb/dns will print that message because the IP stack
	hasn't been set up (you're not booting off a network).
disk/fdisk will print that if it is trying to probe, for example,
	your cd-rom drive.

What happens next is ip/ipconfig runs, to try to get you
an IP address via DHCP.  That times out after something
on the order of 10 seconds to a minute.

Russ

Re: [9fans] ndb/dns & mbr boot problem

[Dan Cross]

> What happens next is ip/ipconfig runs, to try to get you
> an IP address via DHCP.  That times out after something
> on the order of 10 seconds to a minute.

Closer to a minute than 10 seconds, for what it's worth....

	- Dan C.