Re: [9fans] reboo-hoot during install

Re: [9fans] reboo-hoot during install

[Matt]

Hi Jim,

well I've been reading up on VGA and conequently steam is coming out of my
ears.


I was wondering if another slight favor could be achieved (see I even
spelled it in American).

Would it be possible to try adding the 0x30 to the

static Gd542x family[] = {
          { 0x88,  75000000, },           /* CL-GD5420 */
          { 0x8C,  80000000, },           /* CL-GD5422 */
          { 0x94,  80000000, },           /* CL-GD5424 */
          { 0x90,  80000000, },           /* CL-GD5426 */
          { 0x98,  80000000, },           /* CL-GD5428 */
          { 0x9C,  86000000, },           /* CL-GD5429 */
          { 0xA0,  86000000, },           /* CL-GD5430 */
          { 0xA8, 90000000, },            /* CL-GD5434 */
          { 0xAC, 135000000, },           /* CL-GD5436 */
          { 0xB8, 135000000, },           /* CL-GD5446 */
          { 0x00, },
  };

in clgd542x.c ?

I don't know what the maximum dot clock value would be.

I've got the pdf file http://www.proweb.co.uk/~matt/plan9/gd7543db.pdf

if that's any help

Matt

[9fans] reboo-hoot during install

[Matt]

Hi,

I just bought a second hand compaq lte 3500 'cos it's got bits in it on the
hardware compatibility list

but it reboots itself during boot

PBS...Plan9 from Bell Labs
using fd0!dos!plan9.ini
#y0: 2 slot cirrus Login PD6720: port 0x3E0 irq 5
#l0: xcvr10Base2 3C589
ether#0: 3C589: port 0x240 irq 10: 00600822A8DB
dev A0 port 1F0 config 045A capabilities 0F00 mwdma 0407
found 9PCFLOP .GZ attr 0x0 start 0x11f len 334186
.gz ............some numbers
entry .... some numbers

then reboots


Plan9.ini
*nomp=1
distname=plan9
partition=new
ether0=type=3C589
monitor=lcd
vgasize=800x600x8
mouseport=ps2
audio0=type=ess1688
bootargs=local!#f0/fd0disk
bootfile=fd0!dos!9pcflop.gz
installurl=http://204.178.31.2/magic/9down/compressed/969276814.nkak7wqqj28j
hcpksrpkwf2bwvhgcqna


I also tried it with 3C589E (the card itself is a 3C589D)
and also without ESS1688 support


Actual hardware (as detected by WIn98):

VGA : Cirrus Logic 7543 PCI
PCMCIA : Cirrus PCIC compatible