Re: [9fans] PXE tftpload: file does not exist

[Marco Feichtinger <marco@germteig.com>]

yes, ip/dhcpd and ip/tftpd are running on the file server

-marco

> On 17.07.2023, at 20:47, Steve Simon <steve@quintile.net> wrote:
> 
> are you running the tftp server?
> 
> 
>> On 17 Jul 2023, at 4:38 pm, Marco Feichtinger <marco@germteig.com> wrote:
>> 
>> I have a standalone file server, and a separate standalone auth server.
>> 
>> I tried to pxe boot a cpu server.
>> It gets the /386/9boot to load fine, but then it seems, that it can’t retrieve the file /cfg/pxe/<mac address> from my file server.
>> 
>> here is the screen output during bootup:
>>       9boot gz…starting protected-mode loader at 0x900020
>> 
>> Plan 9 from Bell Labs PXE boot loader
>> cpu0: 1800MHz GenuineIntel Atom (cpuid: AX 0x106CA DX 0xBFEBFBFF)
>> ELCR: CC80
>> #l0: i82598: 10Gbps port 0XFE980000 irq 11: <mac address>
>> #l0: i82598: 10Gbps port 0XFE980000 irq 10: <mac address>
>> 498M memory: 498M kernel data, 0M user, 18M swap
>> pxe on ether0 .
>> <sysname> (10.0.10.1!69): /cfg/pxe/<mac address> .T.T.T.T.T.T.T.T.T.Ttftpread1st: failed to connect to server (10.0.10.1!69)
>> 
>> failed.
>> tftpload: file does not exist
>> 
>> Which is strange, because I did create the file on my file server.
>> It looks like following:
>>       bootfile=ether0!/386/9pccpuf
>>       nobootprompt=tcp
>>       readparts=1
>>       mouseport=2
>>       monitor=vesa
>>       vgasize=1024x768x8
>>       user=bootes
>>       sysname=<sysname>
>> 
>> Does anyone know what might be the problem?
>> Thanks.
>> 
>> -marco
>> 

------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T8484142ec51acbb7-M1c404f63e34146aef2dc3e2e
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription