Re: [9fans] Running plan 9 on a Toshiba laptop

["hugo rivera" <uair00@gmail.com>]

yes, I downloaded the cd about 10 days ago.
These are the lines that I could find:

ahci0 port 0xf0704000: hba sss 0; ncs 31; coal 1; mport 2; led 1; clo 1; ems 0;
ich: sata-II with 3 ports

and this is the lspci -vvv output:

00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller
(rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Toshiba America Info Systems Unknown device ff50
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 66
        Region 0: I/O ports at 1c00 [size=8]
        Region 1: I/O ports at 18d4 [size=4]
        Region 2: I/O ports at 18d8 [size=8]
        Region 3: I/O ports at 18d0 [size=4]
        Region 4: I/O ports at 18e0 [size=32]
        Region 5: Memory at f0704000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/2 Enable+
                Address: fee00000  Data: 4042
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] #12 [0010]

And also, for some reason, it takes a while to echo on the screen what
I write on the keyboard. I mean, if you write something, then it
appears on screen after 5 seconds, more or less.

Thanks for your help

Hugo

2008/6/13 erik quanstrom <quanstro@quanstro.net>:
>> well, the only thing I could find using Widows Vista was:
>> Intel(R) 82801HEM/HBM SATA AHCI Controller
>> and
>> FUJITSU MHY2250BH
>
> are you using a very recent cd?
>
> if you can copy down any lines that look like these
> that pop up during the boot process and send them
> to me offline?
>
>        #S/sdE: ahci sb600 port 0xe0022800: sss 0 ncs 31 coal 1 mports 3 led 1 clo 1 ems 0
>        #S/sdE: sb600: sata-II with 4 ports
>
> it would also be helpful if you could send me the output
> of a tool like lspci.  i don't know if there's a windows
> equivalent.  i'm most interested in the vid and did of the
> ahci controller.
>
> - erik
>
>
>