From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jecoz To: 9fans <9fans@9fans.net> Subject: [9front] Amazon Basics USB mice not working on RPi 2 Message-Id: <15878935680.1CedE24.37998@composer.9fans.topicbox.com> Date: Sun, 26 Apr 2020 05:32:48 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="15878935681.EBDb79.37998" Content-Transfer-Encoding: 7bit Topicbox-Policy-Reasoning: allow: sender is a member Topicbox-Message-UUID: e44ffef4-87a0-11ea-bea1-43209134e1fa --15878935681.EBDb79.37998 Date: Sun, 26 Apr 2020 05:32:48 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi folks, I have a RPi 2 with the latest NOTHINKPAD running [1]. Unfortunately the mi= ce I=E2=80=99m using is not working as expected, it is an Amazon Basics USB= 3 button wired mice [2]. This is not explicitly listed in the supported ha= rdware list I know, but it works with miller=E2=80=99s legacy image [3], so= ... I guess it is supposed to work here too! What I did: - plugged keyboard and mice to the RPi - powered the rasp - logged in as glenda - moved the mouse Later on I also changed CMDLINE.TXT adding: - mouseport=3Dps2intellimouse, as my mouse has the wheel [4] What happens: - buttons do not work in any form (neither 1, 2 or 3): pup-up window does n= ot appear, I cannot resize, move, cannot chord - when I hover the corners of a window, its content, e.g. "term%=E2=80=9D, = glitch as I move (I can provide a video of the screen if needed) What is supposed to happen is straightforward I guess. Everything else seems to be working (I cannot/am able to test it properly w= ithout mice though). Messages I read from UART: ``` init: starting /bin/rc aux/timesync: accessing /dev/rtc: '/dev/rtc' file does not exist echo: write error: unknown control message "res 3" nusb/usbd: usbcmd: /dev/usb/ep5.0: required 4 attempts (no data from device) nusb/kb: usbcmd: /dev/usb/ep5.0: required 4 attempts (no data from device) nusb/kb: usbcmd: /dev/usb/ep5.0: required 4 attempts (no data from device) 127 holes free 0x0034e000 0x1912f000 417206272 417206272 bytes free Plan 9 from Bell Labs board rev: 0xa01041 firmware rev: 1569854467 cpu0: 900MHz ARM Cortex-A7 r0p5 fp: 32 registers,=C2=A0 simd fp: arm arch VFPv3+ with common VFP subarch v2; rev 5 998M memory: 402M kernel data, 596M user, 3580M swap cpu1: 900MHz ARM Cortex-A7 r0p5 cpu2: 900MHz ARM Cortex-A7 r0p5 cpu3: 900MHz ARM Cortex-A7 r0p5 nusb/usbd: usbcmd: /dev/usb/ep4.0: required 4 attempts (no data from device) nusb/kb: usbcmd: /dev/usb/ep4.0: required 4 attempts (no data from device) nusb/kb: usbcmd: /dev/usb/ep4.0: required 4 attempts (no data from device) /dev/sdM0: Arasan eMMC SD Host Controller 02 Version 99 /dev/sdM0/data /dev/sdM0/dos dos /dev/sdM0/fs hjfs /dev/sdM0/nvram /dev/sdM0/plan9 bootargs is (tcp, tls, il, local!device)[local!/dev/sdM0/fs] user[glenda]: glenda hjfs: fs is /dev/sdM0/fs ``` Any thoughts? :) Ciao, Daniel [1] http://bell-labs.co/9front/iso/9front-7408.1d345066125a.pi.img.gz.torre= nt [2] https://www.amazon.com/dp/B005EJH6RW/ref=3Dcm_sw_em_r_mt_dp_U_c2dPEbWCW= 145Q [3] https://9p.io/sources/contrib/miller/9pi.img.gz [4] http://fqa.9front.org/fqa4.html= --15878935681.EBDb79.37998 Date: Sun, 26 Apr 2020 05:32:48 -0400 MIME-Version: 1.0 Content-Type: text/html; charset="utf-8" Content-Transfer-Encoding: quoted-printable
Hi folks,
I have a RPi 2 with= the latest NOTHINKPAD running [1]. Unfortunately the mice I=E2=80=99m usin= g is not working as expected, it is an Amazon Basics USB 3 button wired mic= e [2]. This is not explicitly listed in the supported hardware list I know,= but it works with miller=E2=80=99s legacy image [3], so... I guess it is s= upposed to work here too!

What I did:
- plugged keyboard and mice to the RPi
- powered the ra= sp
- logged in as glenda
- moved the mouse
<= /div>

Later on I also changed CMDLINE.TXT adding:
- mouseport=3Dps2intellimouse, as my mouse has the wheel [4]

What happens:
- buttons do not work in= any form (neither 1, 2 or 3): pup-up window does not appear, I cannot resi= ze, move, cannot chord
- when I hover the corners of a window= , its content, e.g. "term%=E2=80=9D, glitch as I move (I can provide a vide= o of the screen if needed)

What is supposed to= happen is straightforward I guess.
Everything else seems to = be working (I cannot/am able to test it properly without mice though).
<= /div>

Messages I read from UART:
```
init: starting /bin/rc
aux/timesync: accessing /dev/= rtc: '/dev/rtc' file does not exist
echo: write error: unknow= n control message "res 3"
nusb/usbd: usbcmd: /dev/usb/ep5.0: = required 4 attempts (no data from device)
nusb/kb: usbcmd: /d= ev/usb/ep5.0: required 4 attempts (no data from device)
nusb/= kb: usbcmd: /dev/usb/ep5.0: required 4 attempts (no data from device)
127 holes free
0x0034e000 0x1912f000 417206272
417206272 bytes free

Plan 9 from Bell= Labs
board rev: 0xa01041 firmware rev: 1569854467
<= div>cpu0: 900MHz ARM Cortex-A7 r0p5
fp: 32 registers,  s= imd
fp: arm arch VFPv3+ with common VFP subarch v2; rev 5
=
998M memory: 402M kernel data, 596M user, 3580M swap
cpu1: 900MHz ARM Cortex-A7 r0p5
cpu2: 900MHz ARM Cortex-A7= r0p5
cpu3: 900MHz ARM Cortex-A7 r0p5
nusb/usbd= : usbcmd: /dev/usb/ep4.0: required 4 attempts (no data from device)
nusb/kb: usbcmd: /dev/usb/ep4.0: required 4 attempts (no data from d= evice)
nusb/kb: usbcmd: /dev/usb/ep4.0: required 4 attempts (= no data from device)

/dev/sdM0: Arasan eMMC SD= Host Controller 02 Version 99
/dev/sdM0/data
/= dev/sdM0/dos dos
/dev/sdM0/fs hjfs
/dev/sdM0/= nvram
/dev/sdM0/plan9
bootargs is (tcp, tls, il= , local!device)[local!/dev/sdM0/fs]
user[glenda]: glenda
<= /div>
hjfs: fs is /dev/sdM0/fs
```
Any thou= ghts? :)

Ciao,
Daniel
<= div>
= --15878935681.EBDb79.37998--