From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sat, 10 Apr 2010 18:28:42 +0200 From: Gabriel Diaz Message-ID: <15985351.20100410182842@rejaa.com> To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net> In-Reply-To: References: <32de680547f61cd4fa1768ba0db8a518@quintile.net> <546927c17df12add587300b1f280e8cd@ladd.quanstro.net> <648703675.20100410112152@rejaa.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: quoted-printable Subject: Re: [9fans] native install Topicbox-Message-UUID: fe4edffe-ead5-11e9-9d60-3106f5b1d025 Hello erik, Saturday, April 10, 2010, 2:54:01 PM, you wrote: >> I have an ASUS P6T SE with a Core i7 and 4gb of ram and it can boot >> with 9atom.iso and install. But something is happening that prevent it >> to boot after the install (i got a register dump. may be something >> wrong happened when doing the format of 9fat :?). Network also works. >> And Vesa works at 1280x900x8 with an ati hd 5750. Monitor is samsung p2= 250. >>=20 >> I'll report if i get it booting, but i think it should boot if was able >> to install and the live cd works, no? > yes, that does sound like some sort of screw up. > could you send > - pci/lspci output,=20 > - a screenshot of the register dump, and > - a sha1sum of the kernel (so i know which kernel > you've got). > - erik This is the 9load panic (manually transcribed): PBS2. . . Plan 9 From Bell Labs no vga; serial console only cpu0: 2675MHz i7 loop 142773 apm ax=3Df000 cx=3Df000 dx=3D40 di=3D100 ebx=3Dffff esi=3D0 found 11 e820 entries flags=3D10a07 trap=3De ecode=3D2 pc=3D0x800377ff ax 8002c391 bx 00000000 cx ffffffff dx 80047fac si 00000001 di 8004ad88 bp 80061c20 cs 0010 ds 008 es 0008 fd 0008 gs 0008 cr0 800000011 cr2 8942443 cr3 0000c000 panic: exception/interrupt 14 press almost any key. . . I installed again to see if i missed some odd behaviour the first time, but seems there are no noticeable error messages. Also the install speed is fine, there is no huge load of interrupts when installing and no missed interrupt messages. The interrupt 14 was associated with sdC and sdD. sdC0 is the sata dvd drive sdD0 is the sata hard disk sdE0 is the ide dvd drive from which i boot plan9, this is attached to some jmicron thing which claims to be ide to sata bridge When booting using the pccd.gz kernel, i get some missed irq messages, also a disk/format of the 9fat partition takes ages, and when completed, the 9fat partition is not readable. sha1 hash of 9pcflop.gz is D5F5E6F48DAA0D0FC604A1A9B27BD8B240673309 9pccd.gz is 85FEE0ADC5FE00BEEF8F448D5F6AE416B1844A9D I'll install a linux so i can send a lspci. slds. --=20 Best regards, Gabriel mailto:gdiaz@rejaa.com