From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <1811660.1034350802742.JavaMail.SYSTEM@vefpostur>
From: david@bsd.is
To: 9fans@cse.psu.edu
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Subject: [9fans] Boot problems
Date: Fri, 11 Oct 2002 15:40:02 +0000
Topicbox-Message-UUID: 0400ef74-eacb-11e9-9e20-41e7f4b1d025

I just installed plan 9 on my machine (ABit VP6, dual pentium 3-board), and the
install went through fine. However, when I try to boot the newly-installed
system, I get the following output:


PBS...Plan 9 from Bell Labs
ELCR: 0E20
apm ax=f000 cx=f000 dx=fdfa di=0 ebx=806c esi=3e4
dev A0 port 1F0 config 045A capabilities 0B00 mwdma 0007 udma 041F
dev B0 port 1F0 config 85C0 capabilities 0F00 mwdma 0007
dev A0 port 170 config 0040 capabilities 2F00 mwdma 0007 udma 203F
dev B0 port 170 config 0040 capabilities 2F00 mwdma 0007 udma 203F
FLAGS=10246 TRAP=e ECODE=2 PC=80036b3d
  AX 00000000 BX 00000000 CX 00033577 DX 00000000
  SI 00ef4c80 DI 81000000 BP 00200000
  CS 0010 DS 0008 ES 0008 FS 0008 GS 0008
  CR0 80000011 CR2 81000000 CR3 0000c000
panic: exception/interrupt 14

Press almost any key to reset..




I'm booting the system using grub (just chainload the p9 partition). I added
the debug=1 option to the first line of plan9.ini, but I got no additional info
(This is actually the output with debug=1).

Any help would be greatly appreciated.

BTW, please include me on replies, as I'm not subscribed to 9fans.

--
David S. Geirsson
david@bsd.is
+354 8696608


--
Sent fra Mommu a www.tal.is