* help -- 486/33, adaptec scsi, dies on extract of disk2.vd
@ 1995-08-09 7:26 Walter
0 siblings, 0 replies; 4+ messages in thread
From: Walter @ 1995-08-09 7:26 UTC (permalink / raw)
> /bin/rc
> The error was:
> rc 30:vdexpand 31:fail |
> Press any key to continue...
I have the same problem (but the exact message varies) on a Dell Optiplex
486/66 with Adaptec 1542 controller.
- W
---------------------------------------------------------------
Walter Smith Internet: wrs@apple.com
Newton Software AppleLink: WALTER.SMITH
Apple Computer, Inc. +1 408 974 5892
^ permalink raw reply [flat|nested] 4+ messages in thread
* help -- 486/33, adaptec scsi, dies on extract of disk2.vd
@ 1995-08-09 15:27 Berry
0 siblings, 0 replies; 4+ messages in thread
From: Berry @ 1995-08-09 15:27 UTC (permalink / raw)
>>>Walter Smith said:
> > /bin/rc
> > The error was:
> > rc 30:vdexpand 31:fail |
> > Press any key to continue...
>
> I have the same problem (but the exact message varies) on a Dell Optiplex
> 486/66 with Adaptec 1542 controller.
I had it too -- remember, rob? -- But I'll have to go back to the office
and check the hardware in that computer.
--berry
Berry Kercheval :: Xerox Palo Alto Research Center
^ permalink raw reply [flat|nested] 4+ messages in thread
* help -- 486/33, adaptec scsi, dies on extract of disk2.vd
@ 1995-08-09 11:17 presotto
0 siblings, 0 replies; 4+ messages in thread
From: presotto @ 1995-08-09 11:17 UTC (permalink / raw)
I'll make a new version of disk1 with a 9dos containing the DMA fix.
I'll post to 9fans when I've done it.
------ original message follows ------
>From cse.psu.edu!9fans-outgoing-owner Wed Aug 9 02:59:44 EDT 1995
Received: by colossus.cse.psu.edu id <45579>; Wed, 9 Aug 1995 02:26:46 -0400
Received: from mail1.eworld.com ([192.215.65.17]) by colossus.cse.psu.edu with SMTP id <45568>; Wed, 9 Aug 1995 02:26:30 -0400
Received: from newton.apple.com by hp1.online.apple.com with SMTP
(1.37.109.16/16.2) id AA238469573; Tue, 8 Aug 1995 23:26:13 -0700
Received: from [17.205.28.27] by newton.apple.com (4.1/SMI-4.1)
id AA19677; Tue, 8 Aug 95 23:26:09 PDT
Message-Id: <v02130500ac4e130dd101@[17.205.28.27]>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Date: Wed, 9 Aug 1995 03:26:08 -0400
To: 9fans@cse.psu.edu
From: wrs@newton.apple.com (Walter Smith)
Subject: Re: help -- 486/33, adaptec scsi, dies on extract of disk2.vd
Sender: owner-9fans@cse.psu.edu
Precedence: bulk
Reply-To: 9fans@cse.psu.edu
> /bin/rc
> The error was:
> rc 30:vdexpand 31:fail |
> Press any key to continue...
I have the same problem (but the exact message varies) on a Dell Optiplex
486/66 with Adaptec 1542 controller.
- W
---------------------------------------------------------------
Walter Smith Internet: wrs@apple.com
Newton Software AppleLink: WALTER.SMITH
Apple Computer, Inc. +1 408 974 5892
^ permalink raw reply [flat|nested] 4+ messages in thread
* help -- 486/33, adaptec scsi, dies on extract of disk2.vd
@ 1995-08-09 4:58 bryan
0 siblings, 0 replies; 4+ messages in thread
From: bryan @ 1995-08-09 4:58 UTC (permalink / raw)
I'm trying to install onto a 486/33 with an Adaptec SCSI controller.
It seems to install disk1 just fine. After running plan9\b.com and
choosing "install from 3 disks", it starts to extract from the second
disk and then dies with the message:
/bin/rc
The error was:
rc 30:vdexpand 31:fail |
Press any key to continue...
the "extract" window has:
/n/kfs/...
/n/kfs/386/b.com
/n/kfs/386/9pcdisk
out-of-sync
expansion failed
disk/mdex
I have tried new copies of disk 2.
I am running Windows 95 on the machine... but it failed the same way
when booting off of DOS 5.0 disks.
...bryan
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~1995-08-09 15:27 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1995-08-09 7:26 help -- 486/33, adaptec scsi, dies on extract of disk2.vd Walter
-- strict thread matches above, loose matches on Subject: below --
1995-08-09 15:27 Berry
1995-08-09 11:17 presotto
1995-08-09 4:58 bryan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).