From: Jim Davis jdavis@cs.arizona.edu
Subject: PC installation problem with aha1542.
Date: Fri, 20 Oct 1995 16:53:29 -0400 [thread overview]
Message-ID: <19951020205329.MeyQJFiOnh5nQyXIKW_dGWkvC3AJvGDduUUtkS8ja4w@z> (raw)
I'm having trouble getting the PC distribution to install on an Intel
pentium system with an aha1542 SCSI adapter.
I booted off a diskette built from the instructions in 'Read this section
if you have trouble installing on the PC.' The hardware rollcall says
Adaptec AHA-1540CP/1542CP BIOS v1.02
SCSI ID #0 seagate st31230n drive c: (80h)
SCSI ID #1 seagate st32550n drive d: (81h)
SCSI ID #6 toshiba xm-4101tasunlcd
Swapped floppies to the Plan 9 disk1, downloaded today
C:\>A:b
Goes to 'Configure SCSI' screen -- I chose the aha154x[BC] option at the
default port 0x330 and rebooted.
5569 free pages, 22276K bytes, swap 111236K, highwater 1112K, headroom 1388K
CPU is a 99 MHz Pentium735 (cpuid: ax 525 dx 1bf)
scsi0: aha1542: port 330 irq 11, dma 5
fs...time...
(Long pause, then)
adaptec0: timeout cmd=#00
adaptec0: invdcmd #02, len 1
(Another long pause)
adaptec0: timeout cmd=#03
adaptec0: invdcmd #02, len 1
(Another long pause)
adaptec0: timeout cmd=#1b
adaptec0: invdcmd #02, len 1
at which point I gave up. I don't know anything about PCs per se; the
SCSI adapter seems to be at the default settings, according to Adaptec's
utility program. Any suggestion?
next reply other threads:[~1995-10-20 20:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
1995-10-20 20:53 Jim [this message]
1995-10-20 21:35 Flaming
1995-10-20 21:53 jmk
1995-10-20 23:36 Jim
1995-10-21 17:25 Will
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19951020205329.MeyQJFiOnh5nQyXIKW_dGWkvC3AJvGDduUUtkS8ja4w@z \
--to=9fans@9fans.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).