From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Thu, 26 Oct 1995 14:13:45 -0400
From: jmk@plan9.att.com jmk@plan9.att.com
Subject: Problem with Hercules Dynamite Power
Topicbox-Message-UUID: 308dece8-eac8-11e9-9e20-41e7f4b1d025
Message-ID: <19951026181345.q-rMdnBtx3kAjoLpDcT1vA9Eesg9OuLRPpggEhCj2ik@z>

These are the Hercules entries I have. They all work as far as I know.

ctlr
	0xC0189="Hercules ISA Bus Dynamite(tm) BIOS. Ver. 8.00N-A2b(04/29/94)"
	link=vga
	clock=ics2494-304
	ramdac=att20c491-90					# really a MUSIC MU9C4910
	ctlr=et4000-w32i
	hwgc=et4000hwgc
ctlr
	0xC0189="Hercules PCI Bus Dynamite(tm) BIOS. Ver. 8.00N-B1a(03/30/94)"
	link=vga
	clock=ics2494-324
	ramdac=stg1702-135
	ctlr=et4000-w32p
	hwgc=et4000hwgc
ctlr
	0xC0189="Hercules PCI Bus Dynamite(tm) BIOS. Ver. 8.00N-D2g(11/28/94)"
	0xC01AD="Ver. 8.00N-D2h(05/31/95)"
	0xC0076="Tseng Laboratories, Inc. 06/28/94 V1.0CN"	# Cardex Challenger
	link=vga
	ramdac=ics534x-135
	ctlr=et4000-w32p
	hwgc=et4000hwgc

------ original message follows ------

>>From cse.psu.edu!9fans-outgoing-owner Thu Oct 26 14:06:36 EDT 1995
Received: by colossus.cse.psu.edu id <78643>; Thu, 26 Oct 1995 13:52:59 -0400
Received: from alf.zfn.uni-bremen.de ([134.102.4.22]) by colossus.cse.psu.edu with SMTP id <78629>; Thu, 26 Oct 1995 13:48:11 -0400
Received: from blue.lrw.uni-bremen.de by alf.zfn.uni-bremen.de (AIX 3.2/UCB 5.64/4.940318)
          id AA29494; Thu, 26 Oct 1995 18:27:18 +0200
Received: from black.lrw.uni-bremen.de by lrw.uni-bremen.de (5.0/SMI-SVR4)
	id AA26303; Thu, 26 Oct 1995 18:26:00 +0100
Received: by black.lrw.uni-bremen.de (5.0/SMI-SVR4)
	id AA19206; Thu, 26 Oct 1995 18:25:21 +0100
Date:	Thu, 26 Oct 1995 13:25:21 -0400
From:	a82@blue.lrw.uni-bremen.de (Henner Gratz)
Message-Id: <9510261725.AA19206@black.lrw.uni-bremen.de>
To:	9fans@cse.psu.edu
Subject: Problem with Hercules Dynamite Power
Content-Length: 1924
Sender: owner-9fans@cse.psu.edu
Precedence: bulk
Reply-To: 9fans@cse.psu.edu

Hello Plan9 users!

After the installation of the 4 diskette system, I'm now trying to configure
the system. Unfortunately I have some trouble with my Hercules Dynamite VGA
card.

Up to now I used the vgadb that came with the diskette system (the updated
one from plan9.att.com) and everything seems to be okay. Because I wasn't
able to get a good color monitor, I have to use a (very) old black/white
VGA monitor (14"), until there is enough money for a better one...

But now I discovered, that my Hercules Dynamite Power 2MB PCI has a newer
ROM Version than the ones used by the AT&T folks. Because adding an entry
to vgadb seems to be easy in this case, I simply added one and start Plan9.
The system boots normally, but now I get four identical pictures on the screen.

Is there someone out there with the same firmware release, who has solved this
problem?

Here are the VGA cards board informations:

Hercules product		: Hercules Dynamite Power PCI
Model number			: D902
Bus type			: PCI
Windows accelerator chip  	: ET4000-W32p
Display memory size		: 2048K DRAM
Video BIOS Version		: 8.00N-D2h (05/31/95)
RAMDAC type(s)			: ICS 5340/5341 (PowerPort)

Monitor				: 31.5 KHz, b&w

And here is my vgadb entry:
ctlr
        0xC0184="Hercules PCI Bus Dynamite(tm) BIOS. Ver. 8.00N-D2h(05/31/95)"
        0xC0076="Tseng Laboratories, Inc. 07/25/94 V8.00N"
        link=vga
        ramdac=ics534x-135
        ctlr=et4000-w32p
        hwgc=et4000hwgc


Thank you very much for your help!

Tschuess,

	Henner
--
===============================================================================
 
Henner Gratz                                 Email:       a82@lrw.uni-bremen.de
Leeuwarder Str. 16A                          Fax (at home): +49-(0)421-58 52 10
D-28259 Bremen                               Tel (at home): +49-(0)421-58 51 84
GERMANY
 
===============================================================================