Problem with Hercules Dynamite Power (Update)

Problem with Hercules Dynamite Power (Update)

[Henner]

Hello again!

I still have problems with my Hercules Dynamite and Plan9. I'm now sure,
that Plan9 recognized my card, that means, my vgadb entry is correct.
Aux/vga -pv produced the following output:

vga->snarf
et4000-w32p->snarf
vga->dump
vga misc             E3
vga feature          2C
vga sequencer        03 01 0F 00 06
vga crt              5F 4F 52 9F 53 1F 0B 3E - 00 40 00 00 00 00 00 00
                     EB 2D DF 28 00 EB EC C3 - FF
vga graphics         00 00 00 00 00 00 05 0F - FF
vga attribute        00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D 0E 0F
                     01 00 0F 00 00
vga vmz               2097152
ics534x-135->dump
ics534x-135 command  00
ics534x-135 f0 m n   7F 7F     6996383
ics534x-135 f1 m n   7F 7F     6996383
ics534x-135 f2 m n   6B 44    65028400
ics534x-135 f3 m n   77 2A    72187490
ics534x-135 f4 m n   79 29    80051642
ics534x-135 f5 m n   6F 27    89886352
ics534x-135 f6 m n   56 43    62999992
ics534x-135 f7 m n   52 26    75170445
ics534x-135 f8 m n   7F 7F     6996383
ics534x-135 f9 m n   7F 7F     6996383
ics534x-135 fA m n   44 43    50113630
ics534x-135 fB m n   44 43    50113630
ics534x-135 fC m n   7F 7F     6996383
ics534x-135 fD m n   7F 7F     6996383
ics534x-135 control  00
et4000-w32p->dump
et4000-w32p Seq06    00 BC
et4000-w32p Crt30    00 00 C8 00 98 10 03 8B
et4000-w32p Crt3F    00
et4000-w32p Attr16   80 00
et4000-w32p SpriteE0 00 01 20 20 0C 09 20 20 - 00 EF 07 02 60 00 01 E2
et4000-w32p ImaF0    FF FF 0F FF 0F FF 0F 20
et4000-w32p hde     280   640
et4000-w32p shb     298   664
et4000-w32p ehb      F8   760
et4000-w32p ht      320   800
et4000-w32p vde     1E0   480
et4000-w32p vrs     1EB   491
et4000-w32p vre     1ED   493
et4000-w32p vt      20D   525
et4000-w32p d i             0       0

The enviroment variable monitor is set to "vga" and vgasize is correctly set
to "640x480x1". Unfortunately, my old standard VGA monitor still shows four
copies of the 81/2 screen. So I connected a modern monitor with a LCD to my
PC and this one told me, that it gets a signal with 64KHz horizontal frequency
and 22Hz vertical. So it seems to me, that the Hercules Dynamite isn't correctly
initialized by the driver. Any ideas?

My Hercules Dynamite Power:
 
Hercules product                : Hercules Dynamite Power PCI
Model number                    : D902
Bus type                        : PCI
Windows accelerator chip        : ET4000-W32p
Display memory size             : 2048K DRAM
Video BIOS Version              : 8.00N-D2h (05/31/95)
RAMDAC type(s)                  : ICS 5340/5341 (PowerPort)
 
Monitor                         : 31.5 KHz, b&w
 
And here is my vgadb entry:
ctlr
        0xC0184="Hercules PCI Bus Dynamite(tm) BIOS. Ver. 8.00N-D2h(05/31/95)"
        0xC0076="Tseng Laboratories, Inc. 07/25/94 V8.00N"
        link=vga
        ramdac=ics534x-135
        ctlr=et4000-w32p
        hwgc=et4000hwgc


As long as I don't have a better monitor I can work with Plan9 using the distributed
vgadb (what means, that my card isn't recognized), but it can be a big problem in the
future.

Thank you very much for any help!

Tschuess,

	Henner

PS: I'm still waiting for the arrival of my CD-ROM, so I can't test any patches until
    I get my copy.

--
===============================================================================
 
Henner Gratz                                 Email:       a82@lrw.uni-bremen.de
Leeuwarder Str. 16A                          Fax (at home): +49-(0)421-58 52 10
D-28259 Bremen                               Tel (at home): +49-(0)421-58 51 84
GERMANY
 
===============================================================================