Installing on D: drive.

Installing on D: drive.

[jmk]

The new diskettes available by ftp should allow you to install
directly on d:. You will have to decrease hdb5 by some amount
and NOT make a hdb6 - Plan 9 installs in space not allocated in
the normal master boot record partition list.

------ original message follows ------

>From cse.psu.edu!9fans-outgoing-owner Wed Nov 15 16:31:43 EST 1995
Received: by colossus.cse.psu.edu id <78445>; Wed, 15 Nov 1995 16:24:00 -0500
Received: from goggins.bath.ac.uk ([138.38.32.13]) by colossus.cse.psu.edu with SMTP id <78448>; Wed, 15 Nov 1995 16:12:28 -0500
Received: from bath.ac.uk (actually host solomon.bath.ac.uk) 
          by goggins.bath.ac.uk with SMTP (PP); Wed, 15 Nov 1995 19:48:29 +0000
Original-Received:  from 
                   GATEWAY by bath.ac.uk with netnews	for 9fans@bath.ac.uk 
                   (9fans@cse.psu.edu)
PP-warning: Illegal Received field on preceding line
To:	cse.psu.edu!9fans
Date:	Tue, 14 Nov 1995 20:26:21 -0500
From:	"Jeff C." <at386.brainiac.mn.org!jrc>
Message-ID: <48bfjt$5gt@stratus.skypoint.net>
Organization: Jeffs Fun House and TCP/IP Research Center
Subject: Installing on D: drive.
Source-Info:  From (or Sender) name not authenticated.
Sender: cse.psu.edu!owner-9fans
Precedence: bulk
Reply-To: cse.psu.edu!9fans

Hi Everyone,

I want to install Plan9 on my pc.  I have read the documentation, and have seen
a few messages about installing on this newsgroup, but I still have a question.

I run Linux and DOS on my PC right now.  The C: drive can't be repartitioned 
to allow room for Plan9, but my D: drive can.  I can make an empty partition 
on my D: drive for Plan9.  It would also be the highest partition on the D: 
drive.  Is there a way I can make the install process use the highest partition
on the D: drive instead of the C: drive ?

Here is a listing from fdisk. I plan to decrease /dev/hdb5 by the 20MB needed
for Plan9 (it would be around 80000 blocks instead of 100462), then create
a new partition /dev/hdb6 of 20MB for Plan9, then hope the install goes 
there instead of wiping out the 386568 (/dev/hda3) partition on the C: drive.

HELP !

/dev/hda is the C: drive. /dev/hdb is the D: drive.

Disk /dev/hda: 16 heads, 63 sectors, 1059 cylinders
Units = cylinders of 1008 * 512 bytes

   Device Boot  Begin   Start     End  Blocks   Id  System
/dev/hda1   *       1       1     271  136583+   6  DOS 16-bit >=32M
/dev/hda2         272     272     292   10584   83  Linux
/dev/hda3         293     293    1059  386568   83  Linux

Disk /dev/hdb: 15 heads, 57 sectors, 789 cylinders
Units = cylinders of 855 * 512 bytes

   Device Boot  Begin   Start     End  Blocks   Id  System
/dev/hdb1           2       2     236  100462+   5  Extended
/dev/hdb2         237     237     258    9405   83  Linux
/dev/hdb3         259     259     790  227430   83  Linux
/dev/hdb5           2       2     236  100462    6  DOS 16-bit >=32M


Thanks,

Jeffrey R. Comstock
jrc@brainiac.mn.org  -or- jrc@skypoint.com
-- 
Jeffrey Comstock
INET: jrc@brainiac.mn.org
WEB:  http://www.skypoint.com/members/jrc/
CW:   -. .-. ----- -..             

Installing on D: drive.

[Jeff]

Hi Everyone,

I want to install Plan9 on my pc.  I have read the documentation, and have seen
a few messages about installing on this newsgroup, but I still have a question.

I run Linux and DOS on my PC right now.  The C: drive can't be repartitioned 
to allow room for Plan9, but my D: drive can.  I can make an empty partition 
on my D: drive for Plan9.  It would also be the highest partition on the D: 
drive.  Is there a way I can make the install process use the highest partition
on the D: drive instead of the C: drive ?

Here is a listing from fdisk. I plan to decrease /dev/hdb5 by the 20MB needed
for Plan9 (it would be around 80000 blocks instead of 100462), then create
a new partition /dev/hdb6 of 20MB for Plan9, then hope the install goes 
there instead of wiping out the 386568 (/dev/hda3) partition on the C: drive.

HELP !

/dev/hda is the C: drive. /dev/hdb is the D: drive.

Disk /dev/hda: 16 heads, 63 sectors, 1059 cylinders
Units = cylinders of 1008 * 512 bytes

   Device Boot  Begin   Start     End  Blocks   Id  System
/dev/hda1   *       1       1     271  136583+   6  DOS 16-bit >=32M
/dev/hda2         272     272     292   10584   83  Linux
/dev/hda3         293     293    1059  386568   83  Linux

Disk /dev/hdb: 15 heads, 57 sectors, 789 cylinders
Units = cylinders of 855 * 512 bytes

   Device Boot  Begin   Start     End  Blocks   Id  System
/dev/hdb1           2       2     236  100462+   5  Extended
/dev/hdb2         237     237     258    9405   83  Linux
/dev/hdb3         259     259     790  227430   83  Linux
/dev/hdb5           2       2     236  100462    6  DOS 16-bit >=32M


Thanks,

Jeffrey R. Comstock
jrc@brainiac.mn.org  -or- jrc@skypoint.com
-- 
Jeffrey Comstock
INET: jrc@brainiac.mn.org
WEB:  http://www.skypoint.com/members/jrc/
CW:   -. .-. ----- -..