SCSI recommendations?

[jim mckie jmk@plan9.bell-labs.com]

None of the listed controllers have drivers. The Flashpoint from
Buslogic is new and doesn't adhere to the same driver interface as
the older controllers; someday there may be a driver. It's unlikely
there will ever be an Adaptec 29xx driver.

My choice would be the Buslogic 946 or 956.

------ forwarded message follows ------

>From cse.psu.edu!9fans-outgoing-owner Thu May  2 12:53:52 EDT 1996
Received: from colossus.cse.psu.edu by plan9; Thu May  2 12:53:52 EDT 1996
Received: by colossus.cse.psu.edu id <79144>; Thu, 2 May 1996 12:27:27 -0400
Received: from mail.rent-a-guru.de ([194.120.69.70]) by colossus.cse.psu.edu with SMTP id <79145>; Thu, 2 May 1996 12:27:05 -0400
Received: from uucp.rent-a-guru.de by mail.rent-a-guru.de via SMTP (951211.SGI.8.6.12.PATCH1042/951211.SGI)
	for <9fans@cse.psu.edu> id SAA05428; Thu, 2 May 1996 18:18:16 +0200
Received: from mwtech
	by uucp.rent-a-guru.de with UUCP (5.65+/MIKROS-5.0)
	id AA01519; Thu, 2 May 96 18:14:17 +0200
Received: by mwtech.rent-a-guru.de (5.65+/MIKROS-5.0)
	id AA09095; Thu, 2 May 96 16:05:19 GMT
From:	Martin Weitzel <rent-a-guru.de!Martin.Weitzel>
Message-Id: <9605021605.AA09095@mwtech.rent-a-guru.de>
Subject: SCSI recommendations?
To:	cse.psu.edu!9fans
Date:	Thu, 2 May 1996 12:05:19 -0400
X-Mailer: ELM [version 2.4 PL20]
Content-Type: text
Content-Length: 890       
Sender: cse.psu.edu!owner-9fans
Precedence: bulk
Reply-To: cse.psu.edu!9fans

I've successfully installed Plan 9 on a 486 ISA motherboard with
AHA 1542 CF SCSI controller.  At some point in the future I want
to acquire a new system with a 586 PCI motherboard.  My hardware
supplier lists the following PCI-SCSI controllers:

	- Adaptec 2940 (also "W" and "UW")
	- Adaptec 2920 / TMC 3260
	- Buslogic FLASHPOINT LT
	- Buslogic(?) KT 930 SGT
	- Buslogic(?) KT 950 SGTX

As I understand, the Adaptec 2940 is not (yet?) supported.  The
FAQ mentions that "Buslogic Controllers are the most trouble-free",
does this include the FLASHPOINT LT?  As it costs only half as much
as the Adaptec I fear it is a stripped down design (LT == light?)
that leaves much to the driver software and the general statement
that Plan 9 "works with ALL Buslogic Controllers" might not be
applicable.

Any recommendations?  I'm not limited to the above list, so feel
free to add your proposal!