9fans - fans of the OS Plan 9 from Bell Labs
 help / color / mirror / Atom feed
* Plan9 and SCSI CD-ROM..
@ 1996-08-19 12:53 Ish
  0 siblings, 0 replies; 4+ messages in thread
From: Ish @ 1996-08-19 12:53 UTC (permalink / raw)


Thanks for help. The SCSI adaptor is Buslogic 445S(VLB) and
is only recognized as aha1542, it is now visible though..
- Ishwar Rattan




^ permalink raw reply	[flat|nested] 4+ messages in thread

* Plan9 and SCSI CD-ROM..
@ 1996-08-19 14:09 Nigel
  0 siblings, 0 replies; 4+ messages in thread
From: Nigel @ 1996-08-19 14:09 UTC (permalink / raw)



> Thanks for help. The SCSI adaptor is Buslogic 445S(VLB) and
> is only recognized as aha1542, it is now visible though..
> - Ishwar Rattan
>

Before everyone else points it out, #R is the SCSI CDROM device. I
was just plain wrong. Therefore bind -a '#'R3 /dev looks OK to me,
but then again I never used it.




Nigel Roles




^ permalink raw reply	[flat|nested] 4+ messages in thread

* Plan9 and SCSI CD-ROM..
@ 1996-08-19  7:17 Nigel
  0 siblings, 0 replies; 4+ messages in thread
From: Nigel @ 1996-08-19  7:17 UTC (permalink / raw)


>
> I am trying to mount scsi cdrom (as unit 3 on a buslogic scsi adapter)
> and having no success with bind.
>
>     bind -a '#R3' /dev
> (fails and syntax message is displayed..)
>
> the card is detected as
>
>   scsi0: aha1542: port 330, irq 11, dma -1
>

#R is a non-SCSI CDROM, such as found lurking on the edge of
old soundblasters. SCSI is #w. Try

9660srv # load 9660 server
mkdir /n/cdrom # somewhere to mount (oo-err)
mount -c /srv/9660 /n/cdrom '#'w3/sd3disk

Are you sure it's a Buslogic? That looks like an Adaptec (aha1542).
If so, the dma = -1 looks suspect. It ought to be a small positive
number.

Nigel Roles




^ permalink raw reply	[flat|nested] 4+ messages in thread

* Plan9 and SCSI CD-ROM..
@ 1996-08-16 20:28 Ishwar
  0 siblings, 0 replies; 4+ messages in thread
From: Ishwar @ 1996-08-16 20:28 UTC (permalink / raw)



I am trying to mount scsi cdrom (as unit 3 on a buslogic scsi adapter)
and having no success with bind.

    bind -a '#R3' /dev
(fails and syntax message is displayed..)

the card is detected as

  scsi0: aha1542: port 330, irq 11, dma -1

please help..

Ishwar Rattan




^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~1996-08-19 14:09 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1996-08-19 12:53 Plan9 and SCSI CD-ROM Ish
  -- strict thread matches above, loose matches on Subject: below --
1996-08-19 14:09 Nigel
1996-08-19  7:17 Nigel
1996-08-16 20:28 Ishwar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).