From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Tue, 28 Apr 1998 11:12:02 -0400
From: Dave M Klint davek@csh.rit.edu
Subject: [9fans] plan9 on Sparc IPC ?
Topicbox-Message-UUID: 782c3776-eac8-11e9-9e20-41e7f4b1d025
Message-ID: <19980428151202.04XIzrbpjG16CGa7FnL6fgJOusQTbkzjwwT5v6pnhnM@z>

>What "vga" card???
Pardon my erronious terminology.  The non b/w monitor output,
whatever it is.

>My IPC has a cg3 card installed and shows the same symptoms (tftp 
>download, then hangs - not even Stop-A works). I tried hardcoding the 
>kernel for the cg3 which made no difference, the same happens with a 
>terminal attached to the serial port (keyboard disconnected, with or 
>without cg3 removed).
The only kernel that works with the serial port (correct me if I'm 
wrong) is the one for the fileserver (9ssfs), and then it _only_ works 
through the serial port.

>I can't try just the onboard bw2, as that seems to be broken (no picture, 
>not even with SunOS). I hope it might just be a fuse, but I've never got 
>round to looking at it so far. Same goes for the boot problem - I would 
>like to find out just how far the system gets... (my guess is it stops 
>somewhere before the graphics card stuff)
Then you might have a problem, becuase the only way I could get plan9
to pop up was through the on board b/w card.

-davek