From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Tue,  6 Oct 1998 13:27:09 +0900
From: Kenji Arisawa arisawa@ken.aichi-u.ac.jp
Subject: [9fans] 9fs and 1542
Topicbox-Message-UUID: 83640934-eac8-11e9-9e20-41e7f4b1d025
Message-ID: <19981006042709.WUXta7RZQVrBrBRU6VhXBgqZ8LND8swaW6kTSeqJpSA@z>

Thank you Forsyth,

You says:
>it sounds like a problem with the scsi bus to me.
>i'd check the termination [especially] and the option settings
>in the 1542 control screen.

I have believed that the hardware and the setting must be
no problem because:
1. When the PC is configured as a plan9 terminal,
   it shows no problem in booting and can read/write
   the scsi disks without problem.
2. Diagnostics in the 1542 control screen shows no errors.
3. Using the scsi utility on the card, I can verify the disks.

I have many 1542CF cards. However all of them are used cards.
They have been attached in old PCs that was already discarded.
So I have no printed documents for them.
I have believed that I can make the card terminated
only by setting dip-switch #1 on the card.
Does it require a physical attachment to be terminated?

I have already tried three cards. They show no difference.

Kenji Arisawa
E-mail: arisawa@aichi-u.ac.jp