[9fans] Dell E4300?

9fans - fans of the OS Plan 9 from Bell Labs
 help / color / mirror / Atom feed

* [9fans]  Dell E4300?
@ 2009-08-15 20:19 Benjamin Huntsman
  2009-08-15 21:34 ` erik quanstrom
  2009-08-16 16:36 ` erik quanstrom
  0 siblings, 2 replies; 12+ messages in thread
From: Benjamin Huntsman @ 2009-08-15 20:19 UTC (permalink / raw)
  To: 9fans

Anyone here had a chance to try a Dell E4300?  It's a nice, compact system, but it really refuses to boot Plan 9:

It has on-board SATA hd, SATA cd-rom, etc.  I tried quanstro's 9atom.iso, and with the SATA controller in AHCI mode, it'll start booting, but hangs at:

45555 => 818807+1020832+474972=2314611
entry: f0100020

Plan 9

In modes other than AHCI, neither the "stock" or quanstro's cd's will recognize any devices other than fd0, and even then won't boot from it.

The "stock" cd will hang here in AHCI mode:

PBS1...
Plan 9 from Bell Labs
ELCR: 0C08
pcirouting: South bridge 8086, 2917 not found

Any idea where to start looking?  (besides for a different laptop, that is :) )

Thanks!!

-Ben

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-15 20:19 [9fans] Dell E4300? Benjamin Huntsman
@ 2009-08-15 21:34 ` erik quanstrom
  2009-08-15 22:41   ` Benjamin Huntsman
  2009-08-16 16:36 ` erik quanstrom
  1 sibling, 1 reply; 12+ messages in thread
From: erik quanstrom @ 2009-08-15 21:34 UTC (permalink / raw)
  To: 9fans

> Anyone here had a chance to try a Dell E4300?  It's a nice, compact system, but it really refuses to boot Plan 9:
>
> It has on-board SATA hd, SATA cd-rom, etc.  I tried quanstro's 9atom.iso, and with the SATA controller in AHCI mode, it'll start booting, but hangs at:
>
> 45555 => 818807+1020832+474972=2314611
> entry: f0100020
>
> Plan 9
>
> In modes other than AHCI, neither the "stock" or quanstro's cd's will recognize any devices other than fd0, and even then won't boot from it.

i think there's a good chance things can work.
clearly we're relatively close to booting, because
we've gotten this far.

my semi-educated guess here is that either
we've done something antisocial in 9load that
has corrupted some SMM mode memory.  the
leading potential culprit here is ahci.  or that
some SMM-driven device, like a usb mouse that
is presented to the os as a ps/2 mouse is messing
up.

the easiest debugging step is to turn off usb
completely.

also, make sure to check for bios updates.

do you have a cpu server?  is your laptop
PXE bootable?  even a useable network card
would work.  if so, it will be much easier to
narrow down the problem quickly.

>
> The "stock" cd will hang here in AHCI mode:
>
> PBS1...
> Plan 9 from Bell Labs
> ELCR: 0C08
> pcirouting: South bridge 8086, 2917 not found

i'll add this southbridge to my cd.  this will definately
not hurt.  could you send me pci output?  if you use
lspci from linux make sure to use -vn so the vid/did
appear.  the descriptive strings are fairly useless.

- erik

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-15 21:34 ` erik quanstrom
@ 2009-08-15 22:41   ` Benjamin Huntsman
  0 siblings, 0 replies; 12+ messages in thread
From: Benjamin Huntsman @ 2009-08-15 22:41 UTC (permalink / raw)
  To: Fans of the OS Plan 9 from Bell Labs

[-- Attachment #1: Type: text/plain, Size: 24918 bytes --]

>i'll add this southbridge to my cd.  this will definately
>not hurt.  could you send me pci output?  if you use
>lspci from linux make sure to use -vn so the vid/did
>appear.  the descriptive strings are fairly useless.

Sorry, I don't use Linux much.  This machine currently runs OpenSolaris.  Below is the output from 'prtconf -pv' which should be more-or-less similar to Linux's 'lspci -vn'.  If you'd prefer the Linux output, I can go download a LiveCD really quick...

Thanks much for your time!!

-Ben



System Configuration:  Sun Microsystems  i86pc
Memory size: 4048 Megabytes
System Peripherals (PROM Nodes):

Node 0x000001
    bios-boot-device:  '82'
    stdout:  00000000
    name:  'i86pc'

    Node 0x000002
        existing:  00db2000.00000000.0bc58801.00000000
        name:  'ramdisk'

    Node 0x000003
        bus-type:  'isa'
        device_type:  'isa'
        name:  'isa'

    Node 0x000004
        compatible: 'pciex_root_complex'
        device_type:  'pciex'
        reg:  00000000.00000000.00000000
        #size-cells:  00000002
        #address-cells:  00000003
        name:  'pci'

        Node 0x000005
            reg:  00000000.00000000.00000000.00000000.00000000
            compatible: 'pci8086,2a40.1028.24d.7' + 'pci8086,2a40.1028.24d' + 'pci1028,24d' + 'pci8086,2a40.7' + 'pci8086,2a40' + 'pciclass,060000' + 'pciclass,0600'
            model:  'Host bridge'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000000
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '0'
            class-code:  00060000
            revision-id:  00000007
            vendor-id:  00008086
            device-id:  00002a40
            name:  'pci1028,24d'

        Node 0x000006
            assigned-addresses:  83001010.00000000.f6c00000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.0000ef98.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.82001000.00000000.000a0000.00000000.00020000
            reg:  00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.82001000.00000000.000a0000.00000000.00020000
            compatible: 'pci8086,2a42.1028.24d.7' + 'pci8086,2a42.1028.24d' + 'pci1028,24d' + 'pci8086,2a42.7' + 'pci8086,2a42' + 'pciclass,030000' + 'pciclass,0300'
            model:  'VGA compatible controller'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000000
            interrupts:  00000001
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            device_type:  'display'
            unit-address:  '2'
            class-code:  00030000
            revision-id:  00000007
            vendor-id:  00008086
            device-id:  00002a42
            name:  'display'

        Node 0x000007
            assigned-addresses:  83001110.00000000.f6b00000.00000000.00100000
            reg:  00001100.00000000.00000000.00000000.00000000.03001110.00000000.00000000.00000000.00100000
            compatible: 'pci8086,2a43.1028.24d.7' + 'pci8086,2a43.1028.24d' + 'pci1028,24d' + 'pci8086,2a43.7' + 'pci8086,2a43' + 'pciclass,038000' + 'pciclass,0380'
            model:  'Video controller'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000000
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '2,1'
            class-code:  00038000
            revision-id:  00000007
            vendor-id:  00008086
            device-id:  00002a43
            name:  'pci1028,24d'

        Node 0x000008
            assigned-addresses:  8200c810.00000000.f6ae0000.00000000.00020000.8200c814.00000000.f6adb000.00000000.00001000.8100c818.00000000.0000efe0.00000000.00000020
            reg:  0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
            compatible: 'pci8086,10f5.1028.24d.3' + 'pci8086,10f5.1028.24d' + 'pci1028,24d' + 'pci8086,10f5.3' + 'pci8086,10f5' + 'pciclass,020000' + 'pciclass,0200'
            model:  'Ethernet controller'
            power-consumption:  00000001.00000001
            devsel-speed:  00000000
            interrupts:  00000001
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '19'
            class-code:  00020000
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  000010f5
            name:  'pci1028,24d'

        Node 0x000009
            assigned-addresses:  8100d020.00000000.00006f60.00000000.00000020
            reg:  0000d000.00000000.00000000.00000000.00000000.0100d020.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2937.1028.24d.3' + 'pci8086,2937.1028.24d' + 'pci1028,24d' + 'pci8086,2937.3' + 'pci8086,2937' + 'pciclass,0c0300' + 'pciclass,0c03'
            model:  'Universal Serial Bus UHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000001
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1a'
            class-code:  000c0300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002937
            name:  'pci1028,24d'

        Node 0x00000a
            assigned-addresses:  8100d120.00000000.00006f80.00000000.00000020
            reg:  0000d100.00000000.00000000.00000000.00000000.0100d120.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2938.1028.24d.3' + 'pci8086,2938.1028.24d' + 'pci1028,24d' + 'pci8086,2938.3' + 'pci8086,2938' + 'pciclass,0c0300' + 'pciclass,0c03'
            model:  'Universal Serial Bus UHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000002
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1a,1'
            class-code:  000c0300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002938
            name:  'pci1028,24d'

        Node 0x00000b
            assigned-addresses:  8100d220.00000000.00006fa0.00000000.00000020
            reg:  0000d200.00000000.00000000.00000000.00000000.0100d220.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2939.1028.24d.3' + 'pci8086,2939.1028.24d' + 'pci1028,24d' + 'pci8086,2939.3' + 'pci8086,2939' + 'pciclass,0c0300' + 'pciclass,0c03'
            model:  'Universal Serial Bus UHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000003
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1a,2'
            class-code:  000c0300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002939
            name:  'pci1028,24d'

        Node 0x00000c
            assigned-addresses:  8200d710.00000000.fed1c400.00000000.00000400
            reg:  0000d700.00000000.00000000.00000000.00000000.0200d710.00000000.00000000.00000000.00000400
            compatible: 'pci8086,293c.1028.24d.3' + 'pci8086,293c.1028.24d' + 'pci1028,24d' + 'pci8086,293c.3' + 'pci8086,293c' + 'pciclass,0c0320' + 'pciclass,0c03'
            model:  'Universal Serial Bus EHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000003
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1a,7'
            class-code:  000c0320
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  0000293c
            name:  'pci1028,24d'

        Node 0x00000d
            assigned-addresses:  8300d810.00000000.f6adc000.00000000.00004000
            reg:  0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
            compatible: 'pciex8086,293e.1028.24d.3' + 'pciex8086,293e.1028.24d' + 'pciex8086,293e.3' + 'pciex8086,293e' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,293e.1028.24d.3' + 'pci8086,293e.1028.24d' + 'pci1028,24d' + 'pci8086,293e.3' + 'pci8086,293e' + 'pciclass,040300' + 'pciclass,0403'
            model:  'Mixed Mode device'
            power-consumption:  00000001.00000001
            devsel-speed:  00000000
            interrupts:  00000001
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1b'
            class-code:  00040300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  0000293e
            name:  'pci1028,24d'

        Node 0x00000e
            reg:  0000e000.00000000.00000000.00000000.00000000
            compatible: 'pciex8086,2940.3' + 'pciex8086,2940' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,2940.3' + 'pci8086,2940' + 'pciclass,060400' + 'pciclass,0604'
            model:  'PCI-PCI bridge'
            bus-range:  0000000b.0000000b
            #size-cells:  00000002
            #address-cells:  00000003
            device_type:  'pciex'
            power-consumption:  00000001.00000001
            devsel-speed:  00000000
            interrupts:  00000001
            unit-address:  '1c'
            class-code:  00060400
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002940
            pci-hotplug-type:  00000001
            name:  'pci8086,2940'

        Node 0x00000f
            reg:  0000e100.00000000.00000000.00000000.00000000
            compatible: 'pciex8086,2942.3' + 'pciex8086,2942' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,2942.3' + 'pci8086,2942' + 'pciclass,060400' + 'pciclass,0604'
            model:  'PCI-PCI bridge'
            ranges:  82000000.00000000.f6900000.82000000.00000000.f6900000.00000000.00100000
            bus-range:  0000000c.0000000c
            #size-cells:  00000002
            #address-cells:  00000003
            device_type:  'pciex'
            power-consumption:  00000001.00000001
            slot-names:  00000001.65696370.00000031
            physical-slot#:  00000001
            devsel-speed:  00000000
            interrupts:  00000002
            unit-address:  '1c,1'
            class-code:  00060400
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002942
            pci-hotplug-type:  00000001
            name:  'pci8086,2942'

            Node 0x00001c
                assigned-addresses:  830c0010.00000000.f69fe000.00000000.00002000
                reg:  000c0000.00000000.00000000.00000000.00000000.030c0010.00000000.00000000.00000000.00002000
                compatible: 'pciex8086,4235.8086.1121.0' + 'pciex8086,4235.8086.1121' + 'pciex8086,4235.0' + 'pciex8086,4235' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,4235.8086.1121.0' + 'pci8086,4235.8086.1121' + 'pci8086,1121' + 'pci8086,4235.0' + 'pci8086,4235' + 'pciclass,028000' + 'pciclass,0280'
                model:  'Network controller'
                power-consumption:  00000001.00000001
                devsel-speed:  00000000
                interrupts:  00000001
                subsystem-vendor-id:  00008086
                subsystem-id:  00001121
                unit-address:  '0'
                class-code:  00028000
                revision-id:  00000000
                vendor-id:  00008086
                device-id:  00004235
                name:  'pci8086,1121'

        Node 0x000010
            reg:  0000e300.00000000.00000000.00000000.00000000
            compatible: 'pciex8086,2946.3' + 'pciex8086,2946' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,2946.3' + 'pci8086,2946' + 'pciclass,060400' + 'pciclass,0604'
            model:  'PCI-PCI bridge'
            ranges:  81000000.00000000.0000d000.81000000.00000000.0000d000.00000000.00001000.82000000.00000000.f6600000.82000000.00000000.f6600000.00000000.00300000.c2000000.00000000.f0000000.c2000000.00000000.f0000000.00000000.00200000
            bus-range:  0000000d.0000000e
            #size-cells:  00000002
            #address-cells:  00000003
            device_type:  'pciex'
            power-consumption:  00000001.00000001
            slot-names:  00000001.65696370.00000033
            physical-slot#:  00000003
            devsel-speed:  00000000
            interrupts:  00000004
            unit-address:  '1c,3'
            class-code:  00060400
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002946
            pci-hotplug-type:  00000001
            name:  'pci8086,2946'

        Node 0x000011
            assigned-addresses:  8100e820.00000000.00006f00.00000000.00000020
            reg:  0000e800.00000000.00000000.00000000.00000000.0100e820.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2934.1028.24d.3' + 'pci8086,2934.1028.24d' + 'pci1028,24d' + 'pci8086,2934.3' + 'pci8086,2934' + 'pciclass,0c0300' + 'pciclass,0c03'
            model:  'Universal Serial Bus UHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000001
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1d'
            class-code:  000c0300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002934
            name:  'pci1028,24d'

        Node 0x000012
            assigned-addresses:  8100e920.00000000.00006f20.00000000.00000020
            reg:  0000e900.00000000.00000000.00000000.00000000.0100e920.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2935.1028.24d.3' + 'pci8086,2935.1028.24d' + 'pci1028,24d' + 'pci8086,2935.3' + 'pci8086,2935' + 'pciclass,0c0300' + 'pciclass,0c03'
            model:  'Universal Serial Bus UHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000002
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1d,1'
            class-code:  000c0300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002935
            name:  'pci1028,24d'

        Node 0x000013
            assigned-addresses:  8100ea20.00000000.00006f40.00000000.00000020
            reg:  0000ea00.00000000.00000000.00000000.00000000.0100ea20.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2936.1028.24d.3' + 'pci8086,2936.1028.24d' + 'pci1028,24d' + 'pci8086,2936.3' + 'pci8086,2936' + 'pciclass,0c0300' + 'pciclass,0c03'
            model:  'Universal Serial Bus UHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000003
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1d,2'
            class-code:  000c0300
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002936
            name:  'pci1028,24d'

        Node 0x000014
            assigned-addresses:  8200ef10.00000000.fed1c000.00000000.00000400
            reg:  0000ef00.00000000.00000000.00000000.00000000.0200ef10.00000000.00000000.00000000.00000400
            compatible: 'pci8086,293a.1028.24d.3' + 'pci8086,293a.1028.24d' + 'pci1028,24d' + 'pci8086,293a.3' + 'pci8086,293a' + 'pciclass,0c0320' + 'pciclass,0c03'
            model:  'Universal Serial Bus EHCI compliant'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000001
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1d,7'
            class-code:  000c0320
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  0000293a
            name:  'pci1028,24d'

        Node 0x000015
            reg:  0000f000.00000000.00000000.00000000.00000000
            compatible: 'pci8086,2448.93' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
            model:  'Subtractive Decode PCI-PCI bridge'
            ranges:  82000000.00000000.f6500000.82000000.00000000.f6500000.00000000.00100000
            bus-range:  00000002.00000002
            #size-cells:  00000002
            #address-cells:  00000003
            device_type:  'pci'
            power-consumption:  00000001.00000001
            devsel-speed:  00000000
            unit-address:  '1e'
            class-code:  00060401
            revision-id:  00000093
            vendor-id:  00008086
            device-id:  00002448
            name:  'pci8086,2448'

            Node 0x000019
                assigned-addresses:  82020810.00000000.f65ff800.00000000.00000800
                reg:  00020800.00000000.00000000.00000000.00000000.02020810.00000000.00000000.00000000.00000800
                compatible: 'pci1180,832.1028.24d.5' + 'pci1180,832.1028.24d' + 'pci1028,24d' + 'pci1180,832.5' + 'pci1180,832' + 'pciclass,0c0010' + 'pciclass,0c00'
                model:  'FireWire (IEEE 1394) OpenHCI compliant'
                power-consumption:  00000001.00000001
                devsel-speed:  00000001
                interrupts:  00000001
                max-latency:  00000004
                min-grant:  00000002
                subsystem-vendor-id:  00001028
                subsystem-id:  0000024d
                unit-address:  '1'
                class-code:  000c0010
                revision-id:  00000005
                vendor-id:  00001180
                device-id:  00000832
                name:  'pci1028,24d'

            Node 0x00001a
                assigned-addresses:  82020910.00000000.f65ff600.00000000.00000100
                reg:  00020900.00000000.00000000.00000000.00000000.02020910.00000000.00000000.00000000.00000100
                compatible: 'pci1180,822.1028.24d.22' + 'pci1180,822.1028.24d' + 'pci1028,24d' + 'pci1180,822.22' + 'pci1180,822' + 'pciclass,080501' + 'pciclass,0805'
                model:  'Unknown class of pci/pnpbios device'
                power-consumption:  00000001.00000001
                devsel-speed:  00000001
                interrupts:  00000002
                max-latency:  00000000
                min-grant:  00000000
                subsystem-vendor-id:  00001028
                subsystem-id:  0000024d
                unit-address:  '1,1'
                class-code:  00080501
                revision-id:  00000022
                vendor-id:  00001180
                device-id:  00000822
                name:  'pci1028,24d'

            Node 0x00001b
                assigned-addresses:  82020a10.00000000.f65ff700.00000000.00000100
                reg:  00020a00.00000000.00000000.00000000.00000000.02020a10.00000000.00000000.00000000.00000100
                compatible: 'pci1180,843.1028.24d.12' + 'pci1180,843.1028.24d' + 'pci1028,24d' + 'pci1180,843.12' + 'pci1180,843' + 'pciclass,088000' + 'pciclass,0880'
                model:  'System peripheral'
                power-consumption:  00000001.00000001
                devsel-speed:  00000001
                interrupts:  00000002
                max-latency:  00000000
                min-grant:  00000000
                subsystem-vendor-id:  00001028
                subsystem-id:  0000024d
                unit-address:  '1,2'
                class-code:  00088000
                revision-id:  00000012
                vendor-id:  00001180
                device-id:  00000843
                name:  'pci1028,24d'

        Node 0x000016
            reg:  0000f800.00000000.00000000.00000000.00000000
            compatible: 'pci8086,2917.1028.24d.3' + 'pci8086,2917.1028.24d' + 'pci1028,24d' + 'pci8086,2917.3' + 'pci8086,2917' + 'pciclass,060100' + 'pciclass,0601'
            model:  'ISA bridge'
            power-consumption:  00000001.00000001
            devsel-speed:  00000001
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1f'
            class-code:  00060100
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002917
            name:  'pci1028,24d'

        Node 0x000017
            assigned-addresses:  8100fa10.00000000.00006e70.00000000.00000008.8100fa14.00000000.00006e78.00000000.00000004.8100fa18.00000000.00006e80.00000000.00000008.8100fa1c.00000000.00006e88.00000000.00000004.8100fa20.00000000.00006ea0.00000000.00000020.8200fa24.00000000.fed1c800.00000000.00000800
            reg:  0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
            compatible: 'pci8086,2929.1028.24d.3' + 'pci8086,2929.1028.24d' + 'pci1028,24d' + 'pci8086,2929.3' + 'pci8086,2929' + 'pciclass,010601' + 'pciclass,0106'
            model:  'SATA AHCI 1.0 Interface'
            power-consumption:  00000001.00000001
            66mhz-capable:  
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000004
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1f,2'
            class-code:  00010601
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002929
            name:  'pci1028,24d'

        Node 0x000018
            assigned-addresses:  8300fb10.00000000.f6adaf00.00000000.00000100.8100fb20.00000000.00001100.00000000.00000020
            reg:  0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
            compatible: 'pci8086,2930.1028.24d.3' + 'pci8086,2930.1028.24d' + 'pci1028,24d' + 'pci8086,2930.3' + 'pci8086,2930' + 'pciclass,0c0500' + 'pciclass,0c05'
            model:  'SMBus (System Management Bus)'
            power-consumption:  00000001.00000001
            fast-back-to-back:  
            devsel-speed:  00000001
            interrupts:  00000002
            max-latency:  00000000
            min-grant:  00000000
            subsystem-vendor-id:  00001028
            subsystem-id:  0000024d
            unit-address:  '1f,3'
            class-code:  000c0500
            revision-id:  00000003
            vendor-id:  00008086
            device-id:  00002930
            name:  'pci1028,24d'

[-- Attachment #2: winmail.dat --]
[-- Type: application/ms-tnef, Size: 7564 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-15 20:19 [9fans] Dell E4300? Benjamin Huntsman
  2009-08-15 21:34 ` erik quanstrom
@ 2009-08-16 16:36 ` erik quanstrom
  2009-08-16 18:51   ` Benjamin Huntsman
  1 sibling, 1 reply; 12+ messages in thread
From: erik quanstrom @ 2009-08-16 16:36 UTC (permalink / raw)
  To: 9fans

there's a new ftp://ftp.quanstro.net/other/9atom.iso.bz2

> It has on-board SATA hd, SATA cd-rom, etc.  I tried quanstro's 9atom.iso, and with the SATA controller in AHCI mode, it'll start booting, but hangs at:
>
> 45555 => 818807+1020832+474972=2314611
> entry: f0100020
>
> Plan 9

okay.  i allowed the kernel to use the e820 scan
that 9load-e820 uses instead of using reamode
itself.  this may not help, but it's a good guess,
anway.  your machine appears to be crashing
during the e820 scan.

also,

> I also tried booting from Erik's atom iso, but don't get very far. eg:
> PBS1
> Plan 9 from Bell Labs
> ELCR: 0CA0
> pcirouting: south bridge 10de, 0260 not found
> aoepnp(<nil>)
> found 11 e820 entries
> Boot devices: fd0 fd1
> boot from:
>
> It doesn't detect IDE controller, so no local disk/CD-ROM to boot from.

fixed.  sorry.

- erik



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-16 16:36 ` erik quanstrom
@ 2009-08-16 18:51   ` Benjamin Huntsman
  2009-08-16 20:04     ` Benjamin Huntsman
  2009-08-17  3:18     ` erik quanstrom
  0 siblings, 2 replies; 12+ messages in thread
From: Benjamin Huntsman @ 2009-08-16 18:51 UTC (permalink / raw)
  To: Fans of the OS Plan 9 from Bell Labs

[-- Attachment #1: Type: text/plain, Size: 1583 bytes --]

>there's a new ftp://ftp.quanstro.net/other/9atom.iso.bz2

The second part of your reply appears to not be directed to this issue, but something similar.  I don't remember writing that.
Anyway, we're getting much further, but the boot process still dies:

.......
pat: 0107040600070406
ELCR: 0C08
pcirouting: BIOS workaround: PCI.0.29.0 at pin 1 link 4 irq 7 -> 3
pcirouting: BIOS workaround: PCI.0.29.1 at pin 2 link 5 irq 1 -> 11
pcirouting: BIOS workaround: PCI.0.29.7 at pin 1 link 4 irq 7 -> 3
pcirouting: BIOS workaround: PCI.0.26.0 at pin 1 link 4 irq 7 -> 3
pcirouting: BIOS workaround: PCI.0.26.1 at pin 2 link 5 irq 1 -> 11
pcirouting: BIOS workaround: PCI.0.27.0 at pin 1 link 5 irq 1 -> 11
#l0: i82567: 1000Mbps port 0xF6AE0000 irq 10 tu 1514: 002170b7a113
sdata: blind probe 1f0
sdata: blind probe 170
#S/sdE: ahci ich port 0xe0020800: ss 1 ncs 31 coal 1 mport 3 led 1 clo 1 ems 1
#S/sdE: ich: sata-II with 4 ports
3536M memory: 256M kernel data, 3280M user, 3905M swap
root is from (il, tcp, local)[local!bootdev/data]:
sdE0: LLBA 488,397,168 sectors
  ST9250421ASG DE14 5TH05P1L [newdrive]
sdE1: LBA 0 sectors
  TSSTcorp DVD+/-RW TS-U633A D200  [newdrive]
boot: can't connect to file server: '#S/sdD0' file does not exist
panic: boot process died: unknown
panic: boot process died: unknown
dumpstack disabled
cpo0: exiting


This is when attempting to use the "boot Plan 9 from this CD" option.
Booting into the "install Plan 9..." option loads the installer.  I'm installing
now and will post the results.

Thanks again!!

-Ben

[-- Attachment #2: winmail.dat --]
[-- Type: application/ms-tnef, Size: 3184 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-16 18:51   ` Benjamin Huntsman
@ 2009-08-16 20:04     ` Benjamin Huntsman
  2009-08-16 20:24       ` erik quanstrom
  2009-08-17  3:18     ` erik quanstrom
  1 sibling, 1 reply; 12+ messages in thread
From: Benjamin Huntsman @ 2009-08-16 20:04 UTC (permalink / raw)
  To: Fans of the OS Plan 9 from Bell Labs

[-- Attachment #1: Type: text/plain, Size: 382 bytes --]

>I'm installing now and will post the results.

Okay, the install works perfectly, and I'm up and running!
Many thanks!

I recall reading that the CD is otherwise identical to the "stock"
version.  So, if I recompile the kernel, it'll break, right?  What
utterances do I need to enter in order to rebuild the kernel as it
appears on the 9atom cd?

Thanks again!!

-Ben

[-- Attachment #2: winmail.dat --]
[-- Type: application/ms-tnef, Size: 2556 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-16 20:04     ` Benjamin Huntsman
@ 2009-08-16 20:24       ` erik quanstrom
  0 siblings, 0 replies; 12+ messages in thread
From: erik quanstrom @ 2009-08-16 20:24 UTC (permalink / raw)
  To: 9fans

> I recall reading that the CD is otherwise identical to the "stock"
> version.  So, if I recompile the kernel, it'll break, right?  What
> utterances do I need to enter in order to rebuild the kernel as it
> appears on the 9atom cd?

the short answer is that you can't, exactly — yet.

here's the original post, which should answer your questions.

http://9fans.net/archive/2009/08/359

interestingly, googling for this with
	site:9fans.net/archive/2009/08 PAT
returns nothing.

- erik



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-16 18:51   ` Benjamin Huntsman
  2009-08-16 20:04     ` Benjamin Huntsman
@ 2009-08-17  3:18     ` erik quanstrom
  2009-08-19  2:59       ` Fernan Bolando
  1 sibling, 1 reply; 12+ messages in thread
From: erik quanstrom @ 2009-08-17  3:18 UTC (permalink / raw)
  To: 9fans

> boot: can't connect to file server: '#S/sdD0' file does not exist
> panic: boot process died: unknown
> panic: boot process died: unknown
> dumpstack disabled
> cpo0: exiting

fixed.  you should now be able to boot from the cd regardless
of which port you've plugged it into sdE5 should be fine.

> I recall reading that the CD is otherwise identical to the "stock"
> version.  So, if I recompile the kernel, it'll break, right?  What
> utterances do I need to enter in order to rebuild the kernel as it
> appears on the 9atom cd?

so, while i recommend that the contrib packages be used instead,
after some thought and a few hrs of quality time removing half-finished
bits, i packaged up the source used to build the 9atom kernels.
	ftp://ftp.quanstro.net/other/kernel.mkfs.bz2
to extract to the current directory
	bunzip2 < kernel.mkfs.bz2 | disk/mext -d .
if anyone objects to this being out there, i'll just remove it.

off the top of my head, this kernel has the following little
bits in addition to tje contrib packages:
- jumbo frames, used with aoe (#l0/ether0/mtu),
- /dev/cputemp on modern amd and intel processors,
- kbd led control, repluggable ps/2 mice, cec console server,
- console on non-onboard serial lines, turning serial console on/off,
- pat,
- /dev/nomp (mp irqs off), and /dev/mpirq (irqs turned on),

the kernel you build will *still* be a little different than mine
because of some changes to libauthsrv i made.  these differences
are in the patch "readnvram" that allow nvram to be on any sd
device.  this is particularly useful for ahci laptops that may have
sdE2 (cdrom) and sdE3 (hd).  while they could have been added
to the big array in libauthsrv.c/nvram, i found it hard to manage.

- erik



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-17  3:18     ` erik quanstrom
@ 2009-08-19  2:59       ` Fernan Bolando
  2009-08-19  3:13         ` erik quanstrom
       [not found]         ` <98019b81f174f69cfceed5718c7f6912@quanstro.net>
  0 siblings, 2 replies; 12+ messages in thread
From: Fernan Bolando @ 2009-08-19  2:59 UTC (permalink / raw)
  To: Fans of the OS Plan 9 from Bell Labs

On Mon, Aug 17, 2009 at 11:18 AM, erik quanstrom<quanstro@quanstro.net> wrote:
>> boot: can't connect to file server: '#S/sdD0' file does not exist
>> panic: boot process died: unknown
>> panic: boot process died: unknown
>> dumpstack disabled
>> cpo0: exiting
>
> fixed.  you should now be able to boot from the cd regardless
> of which port you've plugged it into sdE5 should be fine.
>
>> I recall reading that the CD is otherwise identical to the "stock"
>> version.  So, if I recompile the kernel, it'll break, right?  What
>> utterances do I need to enter in order to rebuild the kernel as it
>> appears on the 9atom cd?
>
> so, while i recommend that the contrib packages be used instead,
> after some thought and a few hrs of quality time removing half-finished
> bits, i packaged up the source used to build the 9atom kernels.
>        ftp://ftp.quanstro.net/other/kernel.mkfs.bz2
> to extract to the current directory
>        bunzip2 < kernel.mkfs.bz2 | disk/mext -d .
> if anyone objects to this being out there, i'll just remove it.
>
> off the top of my head, this kernel has the following little
> bits in addition to tje contrib packages:
> - jumbo frames, used with aoe (#l0/ether0/mtu),
> - /dev/cputemp on modern amd and intel processors,
> - kbd led control, repluggable ps/2 mice, cec console server,
> - console on non-onboard serial lines, turning serial console on/off,
> - pat,
> - /dev/nomp (mp irqs off), and /dev/mpirq (irqs turned on),
>
> the kernel you build will *still* be a little different than mine
> because of some changes to libauthsrv i made.  these differences
> are in the patch "readnvram" that allow nvram to be on any sd
> device.  this is particularly useful for ahci laptops that may have
> sdE2 (cdrom) and sdE3 (hd).  while they could have been added
> to the big array in libauthsrv.c/nvram, i found it hard to manage.
>
Does this include the cd writer bug fixed that we had recently?
Will i break my installation if I do replica/pull?

I dont know how much work it would be, I have always felt the openbsd
way of releasing snapshot seems very effective and replica + contrib
will make the whole process even more effective.


-- 
http://www.fernski.com



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-19  2:59       ` Fernan Bolando
@ 2009-08-19  3:13         ` erik quanstrom
       [not found]         ` <98019b81f174f69cfceed5718c7f6912@quanstro.net>
  1 sibling, 0 replies; 12+ messages in thread
From: erik quanstrom @ 2009-08-19  3:13 UTC (permalink / raw)
  To: fernanbolando, 9fans

> Does this include the cd writer bug fixed that we had recently?

i'm not sure what you're referring to.  it includes all
the fixes that have been made.

> Will i break my installation if I do replica/pull?

it should not.  local changes are supposed to be
preserved.  i have not tried a pull myself.

- erik



^ permalink raw reply	[flat|nested] 12+ messages in thread

[parent not found: <98019b81f174f69cfceed5718c7f6912@quanstro.net>]

* Re: [9fans] Dell E4300?
       [not found]         ` <98019b81f174f69cfceed5718c7f6912@quanstro.net>
@ 2009-08-19  3:24           ` Fernan Bolando
  2009-08-19  3:30             ` erik quanstrom
  0 siblings, 1 reply; 12+ messages in thread
From: Fernan Bolando @ 2009-08-19  3:24 UTC (permalink / raw)
  To: 9fans

On Wed, Aug 19, 2009 at 11:13 AM, erik quanstrom<quanstro@quanstro.net> wrote:
>> Does this include the cd writer bug fixed that we had recently?
>
> i'm not sure what you're referring to.  it includes all
> the fixes that have been made.

I was referring to this thread
http://9fans.net/archive/2009/08/330


>> Will i break my installation if I do replica/pull?
>
> it should not.  local changes are supposed to be
> preserved.  i have not tried a pull myself.
>
The only reason I want to do a pull is to have fix for the bug above.
If it is already in there
then I need to pull

thanks again
fernan



-- 
http://www.fernski.com



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [9fans] Dell E4300?
  2009-08-19  3:24           ` Fernan Bolando
@ 2009-08-19  3:30             ` erik quanstrom
  0 siblings, 0 replies; 12+ messages in thread
From: erik quanstrom @ 2009-08-19  3:30 UTC (permalink / raw)
  To: fernanbolando, 9fans

On Tue Aug 18 23:25:51 EDT 2009, fernanbolando@mailc.net wrote:
> On Wed, Aug 19, 2009 at 11:13 AM, erik quanstrom<quanstro@quanstro.net> wrote:
> >> Does this include the cd writer bug fixed that we had recently?
> >
> > i'm not sure what you're referring to.  it includes all
> > the fixes that have been made.
>
> I was referring to this thread
> http://9fans.net/archive/2009/08/330

this fix is not on the kernel in sources yet,
but it is on 9atom.iso and it is in the
kernel source in the same directory.

but i wouldn't worry about it.  i was the
first person to trip on that (and care)
in 20 years.

- erik



^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2009-08-19  3:30 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-15 20:19 [9fans] Dell E4300? Benjamin Huntsman
2009-08-15 21:34 ` erik quanstrom
2009-08-15 22:41   ` Benjamin Huntsman
2009-08-16 16:36 ` erik quanstrom
2009-08-16 18:51   ` Benjamin Huntsman
2009-08-16 20:04     ` Benjamin Huntsman
2009-08-16 20:24       ` erik quanstrom
2009-08-17  3:18     ` erik quanstrom
2009-08-19  2:59       ` Fernan Bolando
2009-08-19  3:13         ` erik quanstrom
     [not found]         ` <98019b81f174f69cfceed5718c7f6912@quanstro.net>
2009-08-19  3:24           ` Fernan Bolando
2009-08-19  3:30             ` erik quanstrom

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).