From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Thu, 27 Jul 2000 02:01:36 -0400
From: arisawa@ar.aichi-u.ac.jp
Message-Id: <200007270601.CAA09518@cse.psu.edu>
To: 9fans@cse.psu.edu
Subject: [9fans] 53c895 failed to INIT
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Topicbox-Message-UUID: eafde0c4-eac8-11e9-9e20-41e7f4b1d025

Hello,

I am installing 9fs. The target is as bellow:
MB: ASUS SP97-V
cpu: K6/233
ether: 3C905b
scsi card: SYM53C895
scsi #0: IBM DNES-309170LV (9GB Ultra2 SCSI)

This mother board lead me "config:" message of 9pcfs.
However SCSI is something weird.
The messages are as follows:

ether#0: elnk3: port 0xB800 irq=9: ....
sd53c8xx: SYM53C895 rev. 0x01 intr+10 command=2000017
found 9PCFS ...
...
scsi#0: 53c895: port 0 Failed to INIT controller
...
config: ...
...
config: ream main
config: end
sysinit
devinit w0
stack trace of 1
1048 stack out of 4000
...
panic: scsiio: device : w0


I could format the disk using scsi configuration menu
that is shown before FD is accessed.

Any ideas are welcome.

Kenji Arisawa
E-mail: arisawa@aichi-u.ac.jp