From mboxrd@z Thu Jan  1 00:00:00 1970
From: jmk@plan9.bell-labs.com
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Installation problem 2 =P
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Message-Id: <20010512151405.507E3199E1@mail.cse.psu.edu>
Date: Sat, 12 May 2001 11:12:44 -0400
Topicbox-Message-UUID: 9f5e2b3c-eac9-11e9-9e20-41e7f4b1d025


On Sat May 12 08:46:24 EDT 2001, flag@libero.it wrote:
> 
> The troubles with my gfx card are here again! =P
> 
> In attach you can find my vgainfo.txt, and this is what I've added
> to the vgadb file:
> 
> ctrl
>         0xC0045="S3 86C375/86C385 Video BIOS. Version 1.01.03"
> 	0xC0073="375 EDO M70 "
>         link=vga
>         ctlr=virge
> 
> I've even tried different combinations, cause I wasn't 100% sure of 
> my solution, but nothing worked... 

If that really is what you added then it's wrong, the tag in the /lib/vgadb
entry should be 'ctlr', not 'ctrl'.

Try just adding the line
	0xC0045="S3 86C375/86C385 Video BIOS. Version 1.01.03"
to the section with all the other Virge-based cards instead, e.g. after
this entry:
	0xC0045="S3 Savage\IX BIOS Ver. 4.02.50 - 39"	# IBM Thinkpad T21
and take out the one you added.

--jim