* [9fans] thinkpad 560x install
@ 2002-08-02 21:32 Peter Downs
2002-08-02 21:56 ` Dean Prichard
0 siblings, 1 reply; 2+ messages in thread
From: Peter Downs @ 2002-08-02 21:32 UTC (permalink / raw)
To: 9fans
the installer doesn't seem to recognize my linksys etherfast 10/100 (pcmpc100)
plan9.ini:
*nomp=1
distname=plan9
partition=new
nobootprompt=local!/bzroot
#console=0
ether0=type=EC2T
monitor=lcd
vgasize=800x600x16
mouseport=ps2
audio0=type=sb16
bootfile=fd0!dos!9pcflop.gz
I'm guessing either ether0 is wrong or the pcmcia system isn't being recognized.
Any thoughts?
Peter
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [9fans] thinkpad 560x install
2002-08-02 21:32 [9fans] thinkpad 560x install Peter Downs
@ 2002-08-02 21:56 ` Dean Prichard
0 siblings, 0 replies; 2+ messages in thread
From: Dean Prichard @ 2002-08-02 21:56 UTC (permalink / raw)
To: 9fans
Is it a v2 card or a v3 card? (should say on the back)
for v3 Linksys has changed the chipset on the card from a
DL10019 to a Asix AX88190 which i don't think is supported.
On Fri, 2 Aug 2002, Peter Downs wrote:
> Date: Fri, 2 Aug 2002 16:32:59 -0500
> From: Peter Downs <ragnar@ragnartech.net>
> Reply-To: 9fans@cse.psu.edu
> To: 9fans@cse.psu.edu
> Subject: [9fans] thinkpad 560x install
>
> the installer doesn't seem to recognize my linksys etherfast 10/100 (pcmpc100)
>
> plan9.ini:
>
> *nomp=1
> distname=plan9
> partition=new
> nobootprompt=local!/bzroot
> #console=0
> ether0=type=EC2T
> monitor=lcd
> vgasize=800x600x16
> mouseport=ps2
> audio0=type=sb16
> bootfile=fd0!dos!9pcflop.gz
>
> I'm guessing either ether0 is wrong or the pcmcia system isn't being recognized.
>
> Any thoughts?
>
> Peter
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-08-02 21:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-08-02 21:32 [9fans] thinkpad 560x install Peter Downs
2002-08-02 21:56 ` Dean Prichard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).