From mboxrd@z Thu Jan 1 00:00:00 1970 From: Apurva Mehta To: 9fans <9fans@cse.psu.edu> Message-Id: <20030622011730.0dbc1aad.apurva@gmx.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: [9fans] kernel panics.. Date: Sun, 22 Jun 2003 01:17:30 +0530 Topicbox-Message-UUID: d5b3012e-eacb-11e9-9e20-41e7f4b1d025 I posted a few days ago about kernel panics when I try to boot plan 9 from my hard disk. I have not been able to solve them yet. I have been able to successfully boot Plan 9 from the bootable cd. I have installed plan 9 on the second primary partion of my second hard disk (primary slave). I tried installing it from the boot cd as well as from an install floppy. I have also tried booting plan 9 straight of the hard disk as well as from a boot floppy.. Whichever combination I try, I always wind up with the same error message. The register values may change. The error message I am including here is what I get when I try to boot from my boot floppy. The 9load file on the boot floppy is the one which Russ Cox was nice enough to send me yesterday. --- PBS... Plan 9 from Bell Labs ELCR: 0C20 apm ax=f000 cx-f000 di-1200 ebx=576c esi=C03e4 dev A0 port 1F0 config 045A capabilities 0F00 wdma 0007 udma 103F dev B0 port 1F0 config 045A capabilities 0F00 mwdma 0007 udma 0407 dev A0 port 170 config 85C0 capabilities 0F00 mwdma 0407 dev B0 port 170 config 85C0 capabilities 0B00 wdma 0007 udma 0407 FLAGS=10246 TRAP=e ECODE=2 PC=***800298b4*** AX 00000000 BX 00000000 CX 001f4f1b DX 00000000 SI 0001e5f61 D1 81000000 BP 0bb1f04 CS 0010 DS 0008 ES 0008 FS 0008 GS 0008 CR0 80000011 CR2 81000000 CR3 ***00094000*** panic: exception/interrupt 14 Press almost any key to reset... --- Here is my plan9.ini file.. --- bootfile=sdC1!fs!/386/9pcdisk bootdisk=local!#S/sdC1/fs *nomp=1 *nousbprobe=1 *noetherprobe=1 partition=new mouseport=ps2 monitor=multisync75 vgasize=1024x768x32 --- I would love to be able to use plan 9 so any suggestions would be greatly appreciated.. Thanks, - Apurva