From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 30 Nov 2007 17:21:41 +1100 From: Alasdair Reed To: 9fans@cse.psu.edu Message-ID: <20071130062141.GA160@localhost.locahost.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.2.2i Subject: [9fans] panic on install from live CD Topicbox-Message-UUID: 0f26c22c-ead3-11e9-9d60-3106f5b1d025 Hi, I ahve been trying to install plan9 on a standalone pc from the live CD, downloaded about 2-3 days ago from the plan9 site. The live CD has run ok on my system . Upon attempting to install after setting up DMA = on (have tried =off too) mouse=ps2intellimouse (tried ps2 too) vga= as suggested etc when the interface starts I get a message like this **output begins here cpu0: registers for bind 120 Flags=10297 Trap=E E Code=2 PC F0100A3D SS=F3F0 USP=20A55 AX 00000011 BX 00000006 CX 00000000 DX 00000009 S1 00000001 D1 000020ASE BP 00000009 CS 0010 DS 0008 ES 0008 FS 001b GS 0017 MCA 40de 1064a MCT fc0000000000d1dd ur f0e42f34 up f0233318 panic: fault: 0x9 cpu0 exiting dump stack disabled cpu0 exiting **end of output The numbers after GS may not be correct, i copied it down on paper having no way to save it, couldn't read the result there to well. I tried a few times and got varying messages at the beginning of the output "cpu0: registers for sleep" "cpu0 registers for window 114" differing values for the mid-section. and at the end invariably: panic: fault: 0x9 It does not seem that the error is repeatable. The system is a dual boot system (Windows98/NetBSD) the boot is handled by GAG Bootloader. Here is the output of dmesg from NetBSD will give an idea of the hardware NetBSD 3.0.1 (GENERIC) #0: Thu Jul 13 23:43:47 UTC 2006 builds@b3.netbsd.org:/home/builds/ab/netbsd-3-0-1-RELEASE/i386/200607131826Z-obj/home/builds/ab/netbsd-3-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC total memory = 383 MB avail memory = 367 MB BIOS32 rev. 0 found at 0xfdb10 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: AMD Athlon XP 1600+ (686-class), 1400.19 MHz, id 0x662 cpu0: features c3cbfbff cpu0: features c3cbfbff cpu0: features c3cbfbff cpu0: "AMD Athlon(tm) XP 1600+ " cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way cpu0: L2 cache 256 KB 64B/line 16-way cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: VIA Technologies VT8363 (Apollo KT133) Host Bridge (rev. 0x03) agp0 at pchb0: aperture at 0xe0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 (Apollo KT133) PCI to AGP Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: Nvidia GeForce2 MX 100/200 (rev. 0xb2) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 pcib0 at pci0 dev 7 function 0 pcib0: VIA Technologies VT82C686A PCI-ISA Bridge (rev. 0x40) viaide0 at pci0 dev 7 function 1 viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x1a) uhci0: interrupting at irq 9 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x1a) uhci1: interrupting at irq 9 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered VIA Technologies VT82C686A SMBus Controller (SMBus serial bus, revision 0x40) at pci0 dev 7 function 4 not configured auvia0 at pci0 dev 7 function 5: VIA Technologies VT82C686A AC'97 Audio (rev 0x50) auvia0: interrupting at irq 10 auvia0: ac97: Avance Logic ALC200/ALC201 codec; headphone, 18 bit DAC, 18 bit ADC, Realtek 3D auvia0: ac97: ext id 605 audio0 at auvia0: full duplex, mmap, independent emuxki0 at pci0 dev 10 function 0: Creative Labs SBLive! EMU 10000 (audio mul, revision 0x07) emuxki0: ac97: SigmaTel STAC9708 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D emuxki0: ac97: ext id 80 audio1 at emuxki0: full duplex, mmap, independent emuxki0: interrupting at irq 10 joy0 at pci0 dev 10 function 1: Creative Labs PCI Gameport Joystick (rev 0x07) joy0: joystick not connected Lucent Technologies LTMODEM (miscellaneous communications) at pci0 dev 12 function 0 not configured rtk0 at pci0 dev 15 function 0: Realtek 8139 10/100BaseTX rtk0: interrupting at irq 9 rtk0: Ethernet address 00:0a:cd:10:d4:f1 ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec Kernelized RAIDframe activated wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd1 at atabus0 drive 1: wd1: drive supports 16-sector PIO transfers, LBA addressing wd1: 38172 MB, 77557 cyl, 16 head, 63 sec, 512 bytes/sect x 78177792 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 cd0(viaide0:1:0): using PIO mode 4, DMA mode 2 (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) ## end of dmesg checking on plan9 website my hardware would seem to be ok, unless I have missed something!! Any help most grategully received. Regards, Alasdair