From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200909290958.n8T9wWuk011863@elisya.g.zucchetti.com> From: baux80@gmail.com To: 9fans@9fans.net Date: Tue, 29 Sep 2009 11:58:32 +0200 Subject: [9fans] trouble with iso bootstrap Topicbox-Message-UUID: 794ed570-ead5-11e9-9d60-3106f5b1d025 Hi all, I'm tring to bootstrap plan9 iso (plan9.iso and 9atom.iso) on my laptop but... nothing to do. At prompt 'boot from:' I've tried some: sd!cdboot!plan9.ini at return nothing happens and 'boot from:' is here anymore (no errors nor warning, nothing but 'boot from:'). I've sdA0 or 1 sdB0 or 1 sdC0 or 1 sdD0 or 1 sdE0 or 1 sdF0 or 1. Next is my dmesg and lspci (got with a knoppix linux), as main system I've OpenBSD. Thank you in advance. -- dmesg Linux version 2.6.24.4 (root@Knoppix) (gcc version 4.2.3 (Debian 4.2.3-2)) #2 SMP PREEMPT Tue Mar 25 21:35:28 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7df000 (usable) BIOS-e820: 000000003f7e0000 - 000000003f7fffc0 (ACPI data) BIOS-e820: 000000003f7fffc0 - 000000003f800000 (ACPI NVS) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 119MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 260063) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 260063 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 260063 On node 0 totalpages: 260063 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 239 pages used for memmap HighMem zone: 30448 pages, LIFO batch:7 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000E5010, 0014 (r0 INSYDE) ACPI: RSDT 3F7F853B, 0038 (r1 INSYDE RSDT_000 100 ABCD 10200) ACPI: FACP 3F7FFAC0, 0074 (r1 INSYDE FACP_000 100 0000 10200) ACPI: DSDT 3F7F8BA0, 6F1C (r1 COMPAL EDL00 1 INTL 2002036) ACPI: FACS 3F7FFFC0, 0040 ACPI: APIC 3F7FFB50, 0066 (r1 STUPID MAPIC_00 30307830 ABCD 10200) ACPI: MCFG 3F7FFBC0, 003C (r1 INSYDE MCFG_000 30303030 0000 30303030) ACPI: SSDT 3F7F874B, 0277 (r1 PmRef Cpu0Ist 3000 INTL 20030522) ACPI: SSDT 3F7F8573, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522) ACPI: DMI detected: Acer ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 255, address 0xfec10000, GSI 24-279 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f800000:c0700000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258032 Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce highres=off loglevel=0 libata.atapi_enabled=1 quiet SELINUX_INIT=NO nmi_watchdog=0 BOOT_IMAGE=knoppix BOOT_IMAGE=linux mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec10000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1995.019 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1023320k/1040252k available (3742k kernel code, 16180k reserved, 1262k data, 420k init, 122748k highmem) virtual kernel memory layout: fixmap : 0xffe13000 - 0xfffff000 (1968 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc05ea000 - 0xc0653000 ( 420 kB) .data : 0xc04a78c8 - 0xc05e327c (1262 kB) .text : 0xc0100000 - 0xc04a78c8 (3742 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3994.32 BogoMIPS (lpj=6654916) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Checking for popad bug... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 Total of 1 processors activated (3994.32 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs net_namespace: 64 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xea814, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) Force enabled HPET at base address 0xfed00000 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1300-133f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xf0008000-0xf000bfff has been reserved system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved system 00:01: iomem range 0xfec10000-0xfec10fff has been reserved system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:05: ioport range 0x600-0x60f has been reserved system 00:05: ioport range 0x680-0x6ff has been reserved system 00:05: ioport range 0x800-0x80f has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1180-0x11bf has been reserved system 00:05: ioport range 0x1640-0x164f has been reserved system 00:05: ioport range 0xff2c-0xff2f has been reserved system 00:05: iomem range 0xe0000000-0xefffffff has been reserved system 00:05: iomem range 0xf0008000-0xf000bfff has been reserved system 00:05: iomem range 0xfed14000-0xfed17fff has been reserved system 00:05: iomem range 0xfed18000-0xfed18fff has been reserved system 00:05: iomem range 0xfed19000-0xfed19fff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: c000-dfff MEM window: c8000000-cfffffff PREFETCH window: 98000000-9fffffff PCI: Bridge: 0000:00:1c.1 IO window: a000-bfff MEM window: c4000000-c7ffffff PREFETCH window: 94000000-97ffffff PCI: Bus 6, cardbus bridge: 0000:05:04.0 IO window: 00008000-000080ff IO window: 00008400-000084ff PREFETCH window: 8c000000-8fffffff MEM window: c0000000-c3ffffff PCI: Bridge: 0000:00:1e.0 IO window: 8000-9fff MEM window: bc000000-c3ffffff PREFETCH window: 8c000000-93ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1441k freed audit: initializing netlink socket (disabled) audit(1254216245.499:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.9) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] ALI M7101 PMU not found. vesafb: framebuffer at 0xa0000000, mapped to 0xf8880000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac intel_rng: FWH not detected Linux agpgart interface v0.102 agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xa0000000 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets intelfb: Version 0.9.4 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 intelfb: Cannot reserve FB region. Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hdb: TSSTcorpCD/DVDW TS-L632B, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... hdd: IRQ probe failed (0xfffffcfe) hdd: IRQ probe failed (0xfffffcfe) hdc: FUJITSU MHW2080AT, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hdc: cache flushes supported hdc: hdc1 hdc1: hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Loading iSCSI transport class v2.0-724. 3ware Storage Controller device driver for Linux v1.26.02.002. 3ware 9000 Storage Controller device driver for Linux v2.26.02.010. Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 ACPI: PCI interrupt for device 0000:00:1f.2 disabled ahci: probe of 0000:00:1f.2 failed with error -22 ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2 ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:1f.2 ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.2: no available native port PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2 pata_acpi 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:1f.2 pata_acpi 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) pata_acpi 0000:00:1f.2: no available native port PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0x40000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected 116x: driver isp116x-hcd, 03 Nov 2005 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001200 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001220 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001240 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001260 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sl811: driver sl811-hcd, 19 May 2005 drivers/usb/host/r8a66597-hcd.c: driver r8a66597_hcd, 29 May 2007 Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000 input: SynPS/2 Synaptics TouchPad as /class/input/input2 EDAC MC: Ver: 2.1.0 Mar 25 2008 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 8 EISA: Detected 0 cards. cpuidle: using governor ladder usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). ALSA device list: No soundcards found. Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode Freeing unused kernel memory: 420k freed Failed initialization of WD-7000 SCSI card! ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[bc020000-bc0207ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f5971406dd3] ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.624 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 60323 blocks, 131072 bytes/block, largest block is 131118 bytes. cloop: loaded 128 blocks into cache. ISO 9660 Extensions: RRIP_1991A cloop: losetup_file: 27172 blocks, 131072 bytes/block, largest block is 131118 bytes. cloop: loaded 128 blocks into cache. ISO 9660 Extensions: RRIP_1991A aufs 20080324 ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.SATA.PRID.P_D1: found ejectable bay ACPI: \_SB_.PCI0.SATA.PRID.P_D1: Adding notify handler ACPI: Bay [\_SB_.PCI0.SATA.PRID.P_D1] Added input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] input: Video Bus as /class/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: Video Bus as /class/input/input8 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Clocksource tsc unstable (delta = -105502399 ns) Time: hpet clocksource has been installed. cpufreq: No nForce2 chipset. powernow: This module only works with AMD K7 CPUs Marking TSC unstable due to: cpufreq changes. Yenta: CardBus bridge found at 0000:05:04.0 [1025:007a] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:05:04.0, mfunc 0x89500212, devctl 0x44 Yenta: ISA IRQ mask 0x0000, PCI irq 17 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09 pcmcia: parent PCI bridge I/O window: 0x8000 - 0x9fff cs: IO port probe 0x8000-0x9fff: clean. pcmcia: parent PCI bridge Memory window: 0xbc000000 - 0xc3ffffff pcmcia: parent PCI bridge Memory window: 0x8c000000 - 0x93ffffff Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 21 ACPI: PCI interrupt for device 0000:00:1e.3 disabled ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1e.2 to 64 ieee80211_crypt: registered algorithm 'NULL' sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation intel8x0_measure_ac97_clock: measured 52544 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1e.3 to 64 tg3.c:v3.86 (November 9, 2007) ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 22 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:94:3f:16 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] sdhci: SDHCI controller found at 0000:05:04.2 [1524:0550] (rev 1) ACPI: PCI Interrupt 0000:05:04.2[B] -> GSI 17 (level, low) -> IRQ 16 mmc0: SDHCI at 0xbc000100 irq 16 PIO sdhci: SDHCI controller found at 0000:05:04.4 [1524:0551] (rev 1) PCI: Enabling device 0000:05:04.4 (0000 -> 0002) ACPI: PCI Interrupt 0000:05:04.4[B] -> GSI 17 (level, low) -> IRQ 16 mmc1: SDHCI at 0xbc000300 irq 16 PIO ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 22 (level, low) -> IRQ 23 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. warning: process `hwsetup' used the deprecated sysctl system call with 1.23. pcmcia: Detected deprecated PCMCIA ioctl usage from process: hwsetup. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. warning: process `hwsetup' used the deprecated sysctl system call with 1.49. warning: process `hwsetup' used the deprecated sysctl system call with 1.49. device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. [drm] Initialized drm 1.1.0 20060810 NET: Registered protocol family 10 lo: Disabled Privacy Extensions PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 eth0: no IPv6 routers present -- lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 05:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 05:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 05:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 05:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10) 05:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01) 05:04.2 SD Host controller: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01) 05:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01) 05:04.4 FLASH memory: ENE Technology Inc SD/MMC Card Reader Controller (rev 01)