From: DSCreat <dscreatNOdsSPAM@mail.com.invalid>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Installation problem: ATI card
Date: Fri, 11 Aug 2000 08:37:01 +0000 [thread overview]
Message-ID: <24ba136a.8badc8ec@usw-ex0104-032.remarq.com> (raw)
In-Reply-To: <200008101725.NAA20561@cse.psu.edu>
rsc@plan9.bell-labs.com (Russ Cox) wrote:
>There should be a file "vgainfo.txt" on your
>boot floppy now. Please mail that.
Here it is:
main->snarf
vga->snarf
mach64xx->snarf
vga->dump
vga misc 67
vga feature 00
vga sequencer 03 00 03 00 02
vga crt 5F 4F 50 82 55 81 BF 1F - 00 4F 0E 0F 00 00
07 80
9C 8E 8F 28 1F 96 B9 A3 - FF
vga graphics 00 00 00 00 00 10 0E 00 - FF
vga attribute 00 01 02 03 04 05 14 07 - 38 39 3A 3B 3C 3D
3E 3F
0C 00 0F 08 00
vga vm a b 16777216 0
vga vmz 16777216
vga apz 8388608
vga linear 1
vga->attr: 0xC0000-0xC0200=MACH64VV
mach64xx->dump
mach64xx pci 2e4c8 regtable pciregs io ec00 portio
mach64xx ccru 300
mach64xx HTotalDisp 004F005F
mach64xx HSyncStrtWid 00010055
mach64xx VTotalDisp 018F01BF
mach64xx VSyncStrtWid 000E019C
mach64xx VlineCrntVline 011903FF
mach64xx OffPitch 0A000000
mach64xx IntCntl 00000034
mach64xx CrtcGenCntl 02410200
mach64xx OvrClr 00000000
mach64xx OvrWidLR 00000000
mach64xx OvrWidTB 00000000
mach64xx CurClr0 00000000
mach64xx CurClr1 FFFFFFFF
mach64xx CurOffset 00000000
mach64xx CurHVposn 00000000
mach64xx CurHVoff 00000000
mach64xx ScratchReg0 04900400
mach64xx ScratchReg1 00000000
mach64xx ClockCntl 00AD0000
mach64xx BusCntl 73330000
mach64xx MemCntl D0301097
mach64xx ExtMemCntl F0010201
mach64xx MemVgaWpSel 00010000
mach64xx MemVgaRpSel 00010000
mach64xx DacRegs 00FF0040
mach64xx DacCntl 8701200A
mach64xx GenTestCntl 00000108
mach64xx ConfigCntl 00003942
mach64xx ConfigChipId 3A005656
mach64xx ConfigStat0 0080001B
mach64xx ConfigStat1 00000000
mach64xx DspConfig 00000000
mach64xx DspOnOff 00000000
mach64xx DpBkgdClr FFFFFFFF
mach64xx DpChainMsk FFFFFFFF
mach64xx DpFrgdClr FFFFFFFF
mach64xx DpMix FFFFFFFF
mach64xx DpPixWidth FFFFFFFF
mach64xx DpSrc FFFFFFFF
mach64xx DpWriteMsk FFFFFFFF
mach64xx LcdIndex 00000000
mach64xx LcdData 00000000
mach64xx PLL AD D5 1F 14 86 03 FF DA - F5 00 00 C1 A0 1B
00 00
00 00 80 00 10 F6 CC 03 - 00 00 00 00 00 00
00 00
mach64xx VCLK0 25172284
mach64xx VCLK1 28289952
mach64xx VCLK2 0
mach64xx VCLK3 0
rom table offset 100
freq table offset 69E
memclk 62000000
ref_freq 14320000
ref_divider 31
min_freq 9840000
max_freq 235000000
pd 3 value 0 (|3)
post = 8
mach64xx pixel clock = 25170000
vmf 25175000 vmdf 0 vf1 0 vbw 0
vga->init
mach64xx->init
dbdumpmode
type=vga, size=640x480x8
frequency=25175000
x=640 (0x280), y=480 (0x1E0), z=8 (0x8)
ht=800 (0x320), shb=664 (0x298), ehb=760 (0x2F8)
shs=664 (0x298), ehs=760 (0x2F8)
vt=525 (0x20D), vrs=491 (0x1EB), vre=493 (0x1ED)
hsync=0, vsync=0, interlace=0
vga->dump
vga flag Fdump|Finit|Fsnarf
vga misc E3
vga feature 00
vga sequencer 03 01 0F 00 0A
vga crt 5F 4F 52 9F 53 1F20B 3E - 00 40 00 00 00 00
00 00
1EB 2D1DF 50 601EB1EC A3 -7FF
vga graphics 00 00 00 00 00 50 05 0F - FF
vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D
0E 0F
41 FF 0F 00 00
vga clock[0] f 25175000
vga clock[0] d i m 0 0 - 31
vga clock[0] n p q r 218 8 - 0 0
vga vm a b 16777216 0
vga vmz 16777216
vga apz 8388608
vga linear 1
vga->attr: 0xC0000-0xC0200=MACH64VV
mach64xx->dump
mach64xx flag Ulinear|Fdump|Finit|Fsnarf
mach64xx pci 2e4c8 regtable pciregs io ec00 portio
mach64xx ccru 300
mach64xx HTotalDisp 004F0063
mach64xx HSyncStrtWid 000C0052
mach64xx VTotalDisp 01DF020C
mach64xx VSyncStrtWid 000201EA
mach64xx VlineCrntVline 011903FF
mach64xx OffPitch 14000000
mach64xx IntCntl 00000000
mach64xx CrtcGenCntl 03010200
mach64xx OvrClr 00000000
mach64xx OvrWidLR 00000000
mach64xx OvrWidTB 00000000
mach64xx CurClr0 00000000
mach64xx CurClr1 FFFFFFFF
mach64xx CurOffset 00000000
mach64xx CurHVposn 00000000
mach64xx CurHVoff 00000000
mach64xx ScratchReg0 04900400
mach64xx ScratchReg1 00000000
mach64xx ClockCntl 00000002
mach64xx BusCntl 73330000
mach64xx MemCntl D0301097
mach64xx ExtMemCntl F0010201
mach64xx MemVgaWpSel 00010000
mach64xx MemVgaRpSel 00010000
mach64xx DacRegs 00FF0040
mach64xx DacCntl 8701200A
mach64xx GenTestCntl 00000108
mach64xx ConfigCntl 00000000
mach64xx ConfigChipId 3A005656
mach64xx ConfigStat0 0080001B
mach64xx ConfigStat1 00000000
mach64xx DspConfig 00000000
mach64xx DspOnOff 00000000
mach64xx DpBkgdClr FFFFFFFF
mach64xx DpChainMsk FFFFFFFF
mach64xx DpFrgdClr FFFFFFFF
mach64xx DpMix FFFFFFFF
mach64xx DpPixWidth 00020202
mach64xx DpSrc FFFFFFFF
mach64xx DpWriteMsk FFFFFFFF
mach64xx LcdIndex 00000000
mach64xx LcdData 00000000
mach64xx PLL AD D5 1F 14 86 03 FF DA - F5 DA 00 81 A0 1B
00 00
00 00 80 00 10 F6 CC 03 - 00 00 00 00 00 00
00 00
mach64xx VCLK0 25172284
mach64xx VCLK1 28289952
mach64xx VCLK2 25172284
mach64xx VCLK3 0
rom table offset 100
freq table offset 69E
memclk 62000000
ref_freq 14320000
ref_divider 31
min_freq 9840000
max_freq 235000000
pd 3 value 0 (|3)
post = 8
mach64xx pixel clock = 25170000
main->exits
jmk@plan9.bell-labs.com wrote:
>did you comment out the 'monitor=' line in plan9.ini?
I tried also without 'monitor=vga' line in plan9.ini, the same
result (still switching modes in endless loop) except that
in "vgainfo.txt" 2 lines changed:
from:
"mach64xx pci 2e4c8 regtable pciregs io ec00 portio"
to:
"mach64xx pci 2e4a8 regtable pciregs io ec00 portio"
and from:
"mach64xx VlineCrntVline 011903FF"
to:
"mach64xx VlineCrntVline 018303FF"
Hope this means something to you ...
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
next prev parent reply other threads:[~2000-08-11 8:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-08-10 17:24 jmk
2000-08-11 8:37 ` DSCreat [this message]
-- strict thread matches above, loose matches on Subject: below --
2000-08-10 16:49 Russ Cox
2000-07-26 13:54 jmk
2000-08-10 16:16 ` DSCreat
2000-07-26 8:42 DSCreat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=24ba136a.8badc8ec@usw-ex0104-032.remarq.com \
--to=dscreatnodsspam@mail.com.invalid \
--cc=9fans@cse.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).