* [9fans] Mounting a cd?
@ 2000-09-20 17:19 Dan Allen
2000-09-21 8:28 ` [9fans] " Chris Locke
0 siblings, 1 reply; 4+ messages in thread
From: Dan Allen @ 2000-09-20 17:19 UTC (permalink / raw)
To: 9fans
I tried:
9660srv -f /dev/sdD0
mount /srv/9660 /mnt/cd /dev/sdD0
and I cannot get an IS0 9660 CD-ROM to mount on my Plan 9 3rd edition
system.
I'm sure I am just forgetting something... Any hints?
Thanks!
Dan
--
danallen@nwlink.com
Navigate | Calculate | Set Sail.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [9fans] Re: Mounting a cd?
2000-09-20 17:19 [9fans] Mounting a cd? Dan Allen
@ 2000-09-21 8:28 ` Chris Locke
2000-09-21 15:30 ` Mark C. Otto
2000-09-25 16:58 ` Dan Allen
0 siblings, 2 replies; 4+ messages in thread
From: Chris Locke @ 2000-09-21 8:28 UTC (permalink / raw)
To: 9fans
Dan Allen <danallen@nwlink.com> wrote in message
news:39c8e9be_2@news.nwlink.com...
> I tried:
>
> 9660srv -f /dev/sdD0
> mount /srv/9660 /mnt/cd /dev/sdD0
try
9660srv
mount /srv/9660 /mnt/cd /dev/sdD0/data
(assuming your CD is MASTER on the secondary IDE controller)
Chris.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] Re: Mounting a cd?
2000-09-21 8:28 ` [9fans] " Chris Locke
@ 2000-09-21 15:30 ` Mark C. Otto
2000-09-25 16:58 ` Dan Allen
1 sibling, 0 replies; 4+ messages in thread
From: Mark C. Otto @ 2000-09-21 15:30 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 1604 bytes --]
I have a similar problem. I am installing the Plan9 III distribution on a
Gateway 2000 using the Vita Nuova distribution, which has gotten me much further
than the aux/vga step I was stuck at before. Now at the configarch step, the
installation does not recognize the CD-ROM. The log ends with
Mounting kfs filesystem from /dev/sdC0/fs
Mounting kfs filesystem /dev/sdC0/9fat on /n/dist
The CD is not mounted. The distribution CD is in the CD reader. ;-) In the
installation, I do not see where to mount the CD, either in a new window or in
the browse. How can I get the install to recognize the CD-ROM?
I didn't find any list of supported CD-ROMs. I have a Goldstar CD-ROM
GCD-R540. It uses the Enhanced IDE interface. Was able to read it under Win98
and make the boot disk. I am using the default Vita Nuova plan9.ini file. I
attached the state of the configuration and the plan9.ini.
Any help would be appreciated.
Mark
> Dan Allen <danallen@nwlink.com> wrote in message
> news:39c8e9be_2@news.nwlink.com...
> > I tried:
> >
> > 9660srv -f /dev/sdD0
> > mount /srv/9660 /mnt/cd /dev/sdD0
>
> try
> 9660srv
> mount /srv/9660 /mnt/cd /dev/sdD0/data
>
> (assuming your CD is MASTER on the secondary IDE controller)
>
> Chris.
--
Mark Otto, Biological Statistician work: 301-497-5872
Population and Habitat Assessment Section fax: 301-497-5871
Office of Migratory Bird Management e-mail: Mark_Otto@FWS.Gov
U.S. Fish and Wildlife Service
Department of the Interior
11500 American Holly Drive
Laurel, Maryland 20708-4016
[-- Attachment #2: 9inst.cnf --]
[-- Type: text/plain, Size: 436 bytes --]
bootsetup=notdone
configarch=ready
configip=notdone
disk=sdC0
done=(pickdisk partdisk prepdisk reamfs mountfs)
download=notdone
etherdown=notdone
etherup=notdone
finish=notdone
havefiles=notdone
mountfs=done
partdisk=done
pickdisk=done
pppdown=notdone
pppup=notdone
prepdisk=done
ready=(configarch stop)
reamfs=done
startether=notdone
startppp=notdone
stop=ready
stopether=notdone
stopppp=notdone
unpack=notdone
[-- Attachment #3: plan9.ini --]
[-- Type: text/plain, Size: 420 bytes --]
*nomp=1
distname=plan9
partition=new
monitor=multisync75
vgasize=640x480x8
mouseport=ps2
bootargs=local!#f0/fd0disk
bootfile=fd0!dos!9pcflop.gz
^ permalink raw reply [flat|nested] 4+ messages in thread
* [9fans] Re: Mounting a cd?
2000-09-21 8:28 ` [9fans] " Chris Locke
2000-09-21 15:30 ` Mark C. Otto
@ 2000-09-25 16:58 ` Dan Allen
1 sibling, 0 replies; 4+ messages in thread
From: Dan Allen @ 2000-09-25 16:58 UTC (permalink / raw)
To: 9fans
That did the trick!
"Chris Locke" <chris@cjl1.demon.co.uk> wrote in message
news:969477449.29425.0.nnrp-02.c2de4822@news.demon.co.uk...
>
> Dan Allen <danallen@nwlink.com> wrote in message
> news:39c8e9be_2@news.nwlink.com...
> > I tried:
> >
> > 9660srv -f /dev/sdD0
> > mount /srv/9660 /mnt/cd /dev/sdD0
>
> try
> 9660srv
> mount /srv/9660 /mnt/cd /dev/sdD0/data
>
> (assuming your CD is MASTER on the secondary IDE controller)
>
> Chris.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-09-25 16:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-09-20 17:19 [9fans] Mounting a cd? Dan Allen
2000-09-21 8:28 ` [9fans] " Chris Locke
2000-09-21 15:30 ` Mark C. Otto
2000-09-25 16:58 ` Dan Allen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).