From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3A75A175.BBC627FF@FWS.Gov> From: "Mark C. Otto" MIME-Version: 1.0 To: 9fans@cse.psu.edu References: Content-Type: multipart/mixed; boundary="------------A6A138187BA5C103CC70E41C" Subject: [9fans] Installing Plan9 on a Toshiba Sattellite 4015CDS Laptop Date: Mon, 29 Jan 2001 11:59:33 -0500 Topicbox-Message-UUID: 53f85cb2-eac9-11e9-9e20-41e7f4b1d025 This is a multi-part message in MIME format. --------------A6A138187BA5C103CC70E41C Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I am trying to install plan9 on a Toshiba Sattellite 4015CDS. I had problems with aux/vga and was left in rc. I suspect that the problem is in with the CT65555 video chip. I tried adding 0xC0090="TOSHIBA Video BIOS V1.80" # Toshiba 4015CDS below the 0xC0090="CHIPS 65550 PCI & VL Accelerated VGA BIOS" # NEC Versa 6030X/6200MX line. The 65550 chip is supported but not the 65555. I got a aux/vga: hiqvideo: DID 00E5 unsupported error. The specs for the 65555 are on http://www.asiliant.com/65555.htm. The Adding a New VGA Controller section, VGADB(6), looks beyond me. Has anyone else added or looked at adding support for the Toshiba Sattelites, especially ones with the CT65555 chip? Mark The laptop speces are on http://www.support.toshiba.com Toshiba Sattellite 4015CDS CPU: Intel Mobil Pentium II 266MHz (1.7v/18.v/3.3v) Motherboard: Intel 440BX system board Buses: PCI Bus v.2.1 32bit, 33MHz; ISA Bus 16bit, 8.33MHz Memory: 32MB RAM BIOS: (512KB: $MBit Flash EPROMJ, 5V) Display: Color Bright Dual Scan (800x600), Dot pitch: 0.3075mm by 0.3075mm Video: CT65555, 2MB DirectDraw, H/W Cursor, BitBLT Modem 3Com-Noteworthy 56K PC Card Modem Ethernet: 3Com-Megahertz 10Mbps LAN 3CXE589ET Mouse: PS/2 mouse with wheel Sound: Yamaha OPL3-SA3, supports SoundBlaster Pro V3.01 Hard Drive: 4.1GB Enhanced IDE CD-ROM: 24X, .ATAPI (Enhanced IDE) Floppy: 1.44MB Here are the devices found on the boot: cpu0: 267MHz Genuine Intel Pentium IT/Xeon (cpuid: AX 0x0652 DX 0x183F9FF) #y0: 2 slot Intel 82365SL: port 0x3E0 irq 5 dev A0 port 1F0 config 0040 capabilities 0F00 mwdma 0007 udma 0407 dma 00550004 rwm 16 dev A0 port 170 config 85C0 capabilities 0F00 mwdma 0407 dma 00000004 rwm 0 4732 free pages 18928K bytes 98928K swap I attached my plan9.ini and vgainfo.txt. The vgainfo.txt is the one before I added the line to vgadb, because it looked more informative. --------------A6A138187BA5C103CC70E41C Content-Type: text/plain; charset=us-ascii; name="plan9.ini" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="plan9.ini" *nomp=1 distname=plan9 partition=new monitor=multisync75 #vgasize=640x480x8 vgasize=600x800x8 mouseport=ps2 bootargs=local!#f0/fd0disk bootfile=fd0!dos!9pcflop.gz debug=1 --------------A6A138187BA5C103CC70E41C Content-Type: text/plain; charset=us-ascii; name="vgainfo.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="vgainfo.txt" aux/vga: controller not in /lib/vgadb 0xC0000 55 AA 60 CB 3F 37 34 30 30 30 30 30 30 30 30 30 U.`.?74000000000 0xC0010 30 30 30 30 30 30 30 BA 78 01 30 30 30 30 49 42 0000000.x.0000IB 0xC0020 4D 20 56 47 41 20 43 6F 6D 70 61 74 69 62 6C 65 M VGA Compatible 0xC0030 20 42 49 4F 53 2E 20 34 1A 05 81 00 92 01 A2 01 BIOS. 4........ 0xC0040 B0 01 F2 01 E9 7F 97 86 D0 D2 E0 E6 40 C2 DC C8 ............@... 0xC0050 40 A8 CA C6 D0 DC DE D8 DE CE D2 CA E6 58 40 92 @............X@. 0xC0060 DC C6 5C 00 FF 01 55 44 36 16 0A 00 55 44 FD 0A ..\...UD6...UD.. 0xC0070 01 00 00 08 1C CE 07 0D 1F 07 0A 00 A0 7F 00 47 ...............G 0xC0080 00 00 C0 00 B0 00 00 47 00 00 00 6D 1B 00 00 00 .......G...m.... 0xC0090 54 4F 53 48 49 42 41 20 56 69 64 65 6F 20 42 49 TOSHIBA Video BI 0xC00A0 4F 53 20 56 31 2E 38 30 0D 0A 00 00 00 00 00 00 OS V1.80........ 0xC00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0xC00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0xC00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0xC00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0xC00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ main->snarf vga->snarf vga->dump vga misc 67 vga feature 01 vga sequencer 03 00 03 00 02 vga crt 5F 4F 50 82 55 81 BF 1F - 00 4F 0D 0E 00 00 07 80 9C 8E 8F 28 1F 96 B9 A3 - FF vga graphics 00 00 00 00 00 10 0E 00 - FF vga attribute 00 01 02 03 04 05 14 07 - 38 39 3A 3B 3C 3D 3E 3F 0C 00 0F 08 00 vga apz 0 vga linear 0 vmf 25175000 vmdf 0 vf1 0 vbw 0 vga->init dbdumpmode type=vga, size=640x480x1 frequency=25175000 x=640 (0x280), y=480 (0x1E0), z=1 (0x1) ht=800 (0x320), shb=664 (0x298), ehb=760 (0x2F8) shs=664 (0x298), ehs=760 (0x2F8) vt=525 (0x20D), vrs=491 (0x1EB), vre=493 (0x1ED) hsync=0, vsync=0, interlace=0 vga->dump vga flag Fdump|Finit|Fsnarf vga misc E3 vga feature 01 vga sequencer 03 01 0F 00 06 vga crt 5F 4F 52 9F 53 1F20B 3E - 00 40 00 00 00 00 00 00 1EB 2D1DF 28 001EB1EC C3 -7FF vga graphics 00 00 00 00 00 00 05 0F - FF vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D 0E 0F 01 FF 0F 00 00 vga apz 0 vga linear 0 main->exits --------------A6A138187BA5C103CC70E41C--