From mboxrd@z Thu Jan 1 00:00:00 1970 To: 9fans@cse.psu.edu From: emerth@telusplanet.net Message-ID: <3C7B1C9A.7276C679@telusplanet.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Subject: [9fans] help: boot problem after install Date: Tue, 26 Feb 2002 10:27:42 +0000 Topicbox-Message-UUID: 5614a69e-eaca-11e9-9e20-41e7f4b1d025 Hi there, Can anyone suggest a solution to this problem? I've completed the install procedure succesfully, setup the boot to occur from the Plan9 partition, but on boot an error occurs: boot... choose local!#S/sdC0/fs default root option login as glenda with blank password system prints "kfs...boot: nop..." system executes the rc file(s) some messages are printed very quickly... system prints over & over: "wrenwrite failed: i/o error" I cannot quite catch the last few messages before the i/o error because things happen too quickly. I would imagine this is related to my plan9.ini, but I'm at a loss. Thanks in advance, Eric The system details are: PC system Abit BP6 dual Celeron mobo 2 Intel Celerons @ 366 MHz (not overclocked) BIOS settings are factory default 384 MB PC100 RAM no sound card ATI Rage 128 AGP video (this sort of works with some distortion in the install screen at 1024x768) RTL8139 based ethernet card (this isn't supported, but I'll be getting an Intel) IBM Deskstar 20 GB disk Plan9 is installed on 3rd partition, partition size is 1.5GB Partition 1 has PCDOS installed left over from a Netware install, partition 2 has Atheos installed (the partition table has been worked on by PCDOS, Netware 6, Linux and Plan9 ;-)