From mboxrd@z Thu Jan  1 00:00:00 1970
To: 9fans@cse.psu.edu
From: Holly Olson <hdolso@bellatlantic.net>
Message-ID: <3CAFFFB0.EF271F3A@bellatlantic.net>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: [9fans] Booting with a NE2000 clone hangs
Date: Mon,  8 Apr 2002 13:01:21 +0000
Topicbox-Message-UUID: 7363f772-eaca-11e9-9e20-41e7f4b1d025

Hi, I'm trying to install Plan 9 on a  Dell Inspiron 3500 laptop, but
have had problems with the PCMCIA Ethernet cards.

The first was a Dell EtherLink III Lan and Modem PC card by 3com,
labeled as a 3C562D/3C563D. I used the adapter labeled "Etherlink III
PCMCIA (3C589)", downloaded the boot file to a floppy, edited the
plan9.ini changed the type to 3c562, and booted. I got these messages:

#y0 : 2 slot Intel 82365SL : port 0x3E0 irq 5
#l0 xcvr10BaseT 3C562
ether#0: 3C562 port 0x240 irq 10 006097FDD054
it starts loading PCFLOP.GZ, finishes, then these messages come out:

#y0 : 2 slot Intel 82365SL : port 0x3E0 irq 5
#l0 xcvr 10BaseT 3C562
#l0: 3C562 10Mbps port 0x240 irq 10: 006097FDD054

The link lights come on, the boot install proceeds, appears to see the
Ethernet card, I address it manually, start the download, nothing
happens, eventually it times out and presents me the option to download
again. Tried the other pcmcia 3com driver, same result.

The second card is a ne2000 clone pcmcia card. When I boot with this
card, I get the message:

#y0 : 2 slot Intel 82365SL : port 0x3E0 irq 5

the link lights come on, on the card and switch port, but the install
hangs with a blinking cursor. When I add the "nodummyrr" option to the
ether line in the plan9.ini and boot, the install proceeds but the link
lights don't light and the card is not recognized in the "configarch"
step.

Any ideas are suggestions where I may be messing up?

Thanks