From: matt <matt@proweb.co.uk>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Installing Plan9 to bochs
Date: Tue, 10 Jun 2003 15:51:26 +0100 [thread overview]
Message-ID: <3EE5F06E.3040106@proweb.co.uk> (raw)
In-Reply-To: <umkFa.4339$Jq3.713249@news02.tsnz.net>
Wesley Parish wrote:
>It's actually underway as I write!
>
>Will keep you posted.
>
>Wesley Parish
>
>
g.l.
I tried on May 28 th
I reported it not working at the end of last year
and the bug got closed with this comment :
Date: 2003-01-18 04:35
Sender: cbothamy
Logged In: YES
It works here on current cvs, ips=5000000. I booted from a
floppy downloaded from http://plan9.bell-labs.com. The
graphic install process wants a frame buffer, so
installation is only available in texte mode.
%cat bochslog
00000000000i[MEM0 ] allocated memory at 0x825d000. after alignment,
vector=0x825d000
00000000000i[MEM0 ] 32.00MB
00000000000i[MEM0 ] rom at 0xf0000/65536
('/usr/local/share/bochs/bios/BIOS-bochs-latest')
00000000000i[MEM0 ] rom at 0xc0000/32769
('/usr/local/share/bochs/bios/VGABIOS-elpin-2.40')
00000000000i[CMOS ] Setting initial clock to: Wed May 28 00:08:01 2003
(time0=1054076881)
00000000000i[DMA ] channel 4 used by cascade
00000000000i[DMA ] channel 2 used by Floppy Drive
00000000000i[FDD ] fd0: '9disk.flp' ro=0, h=2,t=80,spt=18
00000000000i[FDD ] tried to open b.img read/write: No such file or
directory
00000000000i[FDD ] tried to open b.img read only: No such file or directory
00000000000i[FDD ] fd1: 'b.img' ro=1, h=0,t=0,spt=0
00000000000i[XGUI ] test_alloc_colors: 16 colors available out of 16
colors tried
00000000000i[XGUI ] font 8 wide x 16 high, display depth = 24
00000000000i[VGA ] interval=300000
00000000000i[ ] init_mem of 'harddrv' plugin device by virtual method
00000000000i[ ] init_mem of 'keyboard' plugin device by virtual method
00000000000i[ ] init_mem of 'serial' plugin device by virtual method
00000000000i[ ] init_mem of 'parallel' plugin device by virtual method
00000000000i[ ] init_mem of 'ne2k' plugin device by virtual method
00000000000i[ ] init_dev of 'harddrv' plugin device by virtual method
00000000000i[HD ] HD on ata0-0: 'plan9.bochs_hd'
00000000000i[HD ] translation on ata0-0 set to 'none'
00000000000i[HD ] Boot device will be 'a'
00000000000i[HD ] Floppy boot signature check is enabled
00000000000i[ ] init_dev of 'keyboard' plugin device by virtual method
00000000000i[KBD ] will paste characters every 1000 keyboard ticks
00000000000i[ ] init_dev of 'serial' plugin device by virtual method
00000000000i[SER ] com1 at 0x3f8/8 irq 4
00000000000i[ ] init_dev of 'parallel' plugin device by virtual method
00000000000i[PAR ] parallel port 1 at 0x378
00000000000i[ ] init_dev of 'ne2k' plugin device by virtual method
00000000000i[NE2K ] port 0x280/32 irq 9 mac b0:c4:20:00:00:00
00000000000i[ ] reset of 'harddrv' plugin device by virtual method
00000000000i[ ] reset of 'keyboard' plugin device by virtual method
00000000000i[ ] reset of 'serial' plugin device by virtual method
00000000000i[ ] reset of 'parallel' plugin device by virtual method
00000000000i[ ] reset of 'ne2k' plugin device by virtual method
00000000000i[XGUI ] [x] Mouse off
00000004256i[BIOS ] rombios.c,v 1.85.2.1 2003/01/16 21:58:42 cbothamy Exp $
00000318073i[KBD ] reset-disable command received
00000476377i[HD ] enabling LBA mode
00000481983i[BIOS ] ata0-0: PCHS=60/16/63 translation=none LCHS=60/16/63
00000499628e[HD ] device set to 1 which does not exist
00000931122i[BIOS ] *** int 15h function AX=5304, BX=0000 not yet supported!
00000935536i[BIOS ] *** int 15h function AX=5303, BX=0000 not yet supported!
00003384123i[HD ] enabling LBA mode
00277037777i[NE2K ] TCR write, loop mode 1 not supported
00277037788i[NE2K ] RCR write, monitor bit set!
01968892253i[HD ] enabling LBA mode
02107337393i[CPU ] PE is 1
02107337393i[CPU ] VM is 0
02107337393i[CPU ] CPL is 3
02107337393i[CPU ] IOPL is 0
02107337393i[CPU ] addr is 22104
02107337393i[CPU ] len is 4
02107337393p[CPU ] >>PANIC<< allow_io(): TR:io_base <= 103
02107337393i[SYS ] Last time is 1054078988
02107337393i[XGUI ] Exit.
02107337393i[CPU ] protected mode
02107337393i[CPU ] CS.d_b = 32 bit
02107337393i[CPU ] SS.d_b = 32 bit
02107337393i[CPU ] | EAX=564d5868 EBX=00000000 ECX=0000000a EDX=00005658
02107337393i[CPU ] | ESP=7fffeef0 EBP=7fffef20 ESI=00007d3c EDI=7fffef20
02107337393i[CPU ] | IOPL=0 NV UP EI PL ZR NA PE NC
02107337393i[CPU ] | SEG selector base limit G D
02107337393i[CPU ] | SEG sltr(index|ti|rpl) base limit G D
02107337393i[CPU ] | DS:001b( 0003| 0| 3) 00000000 000fffff 1 1
02107337393i[CPU ] | ES:001b( 0003| 0| 3) 00000000 000fffff 1 1
02107337393i[CPU ] | FS:001b( 0003| 0| 3) 00000000 000fffff 1 1
02107337393i[CPU ] | GS:001b( 0003| 0| 3) 00000000 000fffff 1 1
02107337393i[CPU ] | SS:001b( 0003| 0| 3) 00000000 000fffff 1 1
02107337393i[CPU ] | CS:0023( 0004| 0| 3) 00000000 000fffff 1 1
02107337393i[CPU ] | EIP=0000118d (0000118c)
02107337393i[CPU ] | CR0=0x80010039 CR1=0x00000000 CR2=0x000043fc
02107337393i[CPU ] | CR3=0x0157d000 CR4=0x00000000
02107337393i[ ] restoring default signal behavior
02107337393i[CTRL ] quit_sim called with exit code 1
next prev parent reply other threads:[~2003-06-10 14:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-10 14:19 Wesley Parish
2003-06-10 14:51 ` matt [this message]
2003-06-16 9:26 ` Wesley Parish
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EE5F06E.3040106@proweb.co.uk \
--to=matt@proweb.co.uk \
--cc=9fans@cse.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).