From: Andy Clements <awc@candhsoftware.com>
To: 9fans@cse.psu.edu
Subject: [9fans] Newbie installation error - IBM 300 GL
Date: Thu, 26 Feb 2004 09:47:54 -0700 [thread overview]
Message-ID: <403E233A.70802@candhsoftware.com> (raw)
In-Reply-To: <a64882b88bbaeb498c922974ba68225c@9netics.com>
[-- Attachment #1: Type: text/plain, Size: 1691 bytes --]
Hello 9 fans,
I'm trying to install Plan 9 on an IBM 300 GL desktop via floppy disk.
I have done this successfully before with a similar IBM 300 GL desktop,
the only difference between the two machines is the working one has a
faster processor, CD-ROM & an slightly older BIOS date.
I get the following message when attempting to install Plan 9: (retyped
from notes - so there may be inconsistencies)
init: stating /bin/rc
dossrv: serving #s/dos
/n/a:/vgainfo.txt: rc: can't open :clone failed.
init: starting /bin/rc
%
From what I understand of the installation process from the wiki, the
OS is trying to write the aux/vga information to the floppy disk. It
seems to fail in it's attempt to write to the disk. When I go to /n/a:
and attempt to access any of the files, I recieve the message "clone
failed". Can I assume this is possibly a hardware problem and my floppy
drive is defective - or is there something else?
Being that I have installed successfully on a similar machine, I assume
that the vgainfo.txt & pci.txt from that machine would be valid for this
one. I added these files to the floppy and re-tried the installation,
however, the installation stopped again in it's attempt to write to the
disk. My question is this, can I edit the script for the process to
skip the aux/vga -p >/n/a:vgainfo.txt step and just read the vgainfo.txt
I already have there? If this is possible, can someone point me to the
place where this script is located.
I have added the plan9.ini of the broke installation and the vgainfo.txt
& pci.txt files of the working installation for perusal.
Thanks for your help in advance
--Andy Clements
[-- Attachment #2: vgainfo.txt --]
[-- Type: text/plain, Size: 3225 bytes --]
main->snarf
vga->snarf
clgd542x->snarf
vga->attr: 0xC0039=CL-GD5436/46 PCI VGA BIOS Version
vga->dump
vga misc 67
vga feature 00
vga sequencer 03 00 03 00 02
vga crt 5F 4F 50 82 55 81 BF 1F - 00 4F 0D 0E 00 00 06 40
9C 8E 8F 28 1F 96 B9 A3 - FF
vga graphics 00 00 00 00 00 10 0E 00 - FF
vga attribute 00 01 02 03 04 05 14 07 - 38 39 3A 3B 3C 3D 3E 3F
0C 00 0F 08 00
vga virtual 0 0
vga panning off
vga clock[1] f 135000000
vga clock[1] d i m 0 0 - 0
vga clock[1] n p q r 0 0 - 0 0
vga vm a b 16777216 0
vga vmz 16777216
vga apz 0
vga linear 1
clgd542x->dump
clgd542x flag Ulinear|Hlinear|Fsnarf
clgd542x Seq06 12 00 83 B0 33 4A 5B 42 - 7E 1B 00 00 00 00 10 03
08 21 40 00 00 2B 2F 1F - 33 2D
clgd542x Crt19 00 00 00 00 00
clgd542x Gr09 00 00 00 FF 00 00 00 FF - FF FF FF FF FF 37 00 04
00 FF FF FF FF FF FF FF - 1F FF 07 FF 1F FF 1F FF
FF 3F 00 FF FF 3F 00 00 - 00 00 00 FF FF 00 00 00
00
clgd542x Id Hdr B8 00
vmf 0 vmdf 40000000 vf1 135000000 vbw 75000000
using frequency 56818080 rr 85.00 membw 40800000
vga->init
clgd542x->init
clgd542x->init->clgd54xxclock
dbdumpmode
type=multisync75, size=800x600x8
frequency=56818080
x=800 (0x320), y=600 (0x258), z=8 (0x8)
ht=1056 (0x420), shb=840 (0x348), ehb=1000 (0x3E8)
shs=840 (0x348), ehs=1000 (0x3E8)
vt=633 (0x279), vrs=605 (0x25D), vre=607 (0x25F)
hsync=0, vsync=0, interlace=0
vga->attr: 0xC0039=CL-GD5436/46 PCI VGA BIOS Version
vga->dump
vga flag Fdump|Finit|Fsnarf
vga misc EF
vga feature 00
vga sequencer 03 01 0F 00 0A
vga crt 7F 63 68 9D 69 9D277 F0 - 00 60 00 00 00 00 00 00
25D 2F257 64 6025D25E A3 -7FF
vga graphics 00 00 00 00 00 50 05 0F - FF
vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D 0E 0F
41 FF 0F 00 00
vga virtual 800 600
vga panning off
vga clock[0] f 56810843
vga clock[0] d i m 31 0 - 0
vga clock[0] n p q r 123 0 - 0 0
vga clock[1] f 135000000
vga clock[1] d i m 0 0 - 0
vga clock[1] n p q r 0 0 - 0 0
vga vm a b 16777216 0
vga vmz 16777216
vga apz 0
vga linear 1
clgd542x->dump
clgd542x flag Ulinear|Hlinear|Fdump|Fsnarf
clgd542x Seq06 12 01 83 B0 33 4A 5B 42 - 7B 3B 00 00 00 00 10 03
08 21 40 00 00 2B 2F 1F - 3E 2D
clgd542x Crt19 00 90 22 00 00
clgd542x Gr09 00 00 20 FF 00 00 00 FF - FF FF FF FF FF 37 00 04
00 FF FF FF FF FF FF FF - 1F FF 07 FF 1F FF 1F FF
FF 3F 00 FF FF 3F 00 00 - 00 00 00 FF FF 00 00 00
00
clgd542x Id Hdr B8 00
main->exits
[-- Attachment #3: pci.txt --]
[-- Type: text/plain, Size: 311 bytes --]
0.0.0: 06.00.00 8086/7030 0
0.1.0: 06.01.00 8086/7000 0
0.1.1: 01.01.80 8086/7010 0 4:0000fff1 16
0.1.2: 0c.03.00 8086/7020 11 4:00005441 32
0.11.0: 04.01.00 1274/1371 11 0:00005401 64
0.12.0: 02.00.00 1186/1300 10 0:00005001 256 1:60000000 256
0.8.0: 03.00.00 1013/00b8 255 0:40000008 16777216
[-- Attachment #4.1: Type: text/plain, Size: 309 bytes --]
The following attachment had content that we can't
prove to be harmless. To avoid possible automatic
execution, we changed the content headers.
The original header was:
Content-Type: text/plain;
name="PLAN9.INI"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="PLAN9.INI"
[-- Attachment #4.2: PLAN9.INI.suspect --]
[-- Type: application/octet-stream, Size: 371 bytes --]
*nomp=1
distname=plan9
nobootprompt=local!/boot/bzroot
debug=1
# serial console on COM1
#console=0
# disable ether and usb probing
#*nousbprobe=1
#*noetherprobe=1
monitor=multisync65
vgasize=680x480x8
mouseport=ps2
bootfile=fd0!dos!9pcflop.gz
installurl=http://204.178.31.2/magic/9down4e/compressed/1077139799.aejq2nggky8svt7ijewpsyqwqp2e3hi7
prev parent reply other threads:[~2004-02-26 16:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-25 22:25 [9fans] aan for drawterm 9nut
2004-02-25 21:38 ` andrey mirtchovski
2004-02-25 23:00 ` 9nut
2004-02-25 22:59 ` David Presotto
2004-02-26 1:11 ` Derek Fawcus
2004-02-26 6:39 ` boyd, rounin
2004-02-26 7:26 ` 9nut
2004-02-26 13:53 ` David Presotto
2004-02-26 13:59 ` Philippe Anel
2004-02-26 14:07 ` [9fans] rocks rog
2004-02-26 15:28 ` vic zandy
2004-02-26 16:47 ` Andy Clements [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=403E233A.70802@candhsoftware.com \
--to=awc@candhsoftware.com \
--cc=9fans@cse.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).