-------------------------------------- Preparing menu... The following unfinished tasks are ready to be done: configfs - choose the type of file system to install Task to do [configfs]: -------------------------------------- You can install the following types of file systems: fossil an archival (dump) file server kfs the old Plan 9 on-disk file server If you choose to install fossil, you can add Venti later, assuming you leave enough disk space for it. File system (fossil, kfs)[fossil]: -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server The following unfinished tasks are ready to be done: mountfs - choose and mount file system partition Task to do [mountfs]: partdisk -------------------------------------- The following disk devices were found. sdC0 - WDC WD2000BB-22GUA0 p1 0 5841 (5841 cylinders, 42.11 GB) type 166 p2 5841 6001 (160 cylinders, 1.15 GB) FAT32LBA p3 6001 7500 (1499 cylinders, 10.80 GB) FAT32 * p4 7500 25000 (17500 cylinders, 126.17 GB) PLAN9 empty 25000 25841 (841 cylinders, 6.06 GB) sdD0 - HL-DT-STDVDRRW GWA-4083B1.0904/07/30 Disk to partition (sdC0, sdD0)[no default]: sdC0 This is disk/fdisk; use it to create a Plan 9 partition. If there is enough room, a Plan 9 partition will be suggested; you can probably just type 'w' and then 'q'. cylinder = 7741440 bytes p1 0 5841 (5841 cylinders, 42.11 GB) type 166 p2 5841 6001 (160 cylinders, 1.15 GB) FAT32LBA p3 6001 7500 (1499 cylinders, 10.80 GB) FAT32 * p4 7500 25000 (17500 cylinders, 126.17 GB) PLAN9 empty 25000 25841 (841 cylinders, 6.06 GB) >>> d p4 >>> d p3 >>> a p3 start cylinder: 6001 end [6001..25841] 8200 >>> t p3 new partition type [? for list]: ? EMPTY FAT12 XENIX XENIX USR FAT16 EXTENDED FATHUGE HPFS AIXBOOT AIXDATA OS/2BOOT FAT32 FAT32LBA EXTHUGE UNFORMATTED HPFS2 IBMRECOVERY PLAN9 CPM0 DMDDO GB SPEEDSTOR SYSV386 NETWARE PCIX MINIXV1.3 MINIXV1.5 LINUXSWAP LINUX LINUXEXTENDED AMOEBA AMOEBABB BSD386 BSDI BSDISWAP OTHER CPM DELLRECOVERY SPEEDSTOR12 SPEEDSTOR16 LANSTEP BB new partition type [? for list]: FAT32LBA >>> a p4 start cylinder: 8200 end [8200..25841] 25000 >>> p p1 0 5841 (5841 cylinders, 42.11 GB) type 166 p2 5841 6001 (160 cylinders, 1.15 GB) FAT32LBA ' p3 6001 8200 (2199 cylinders, 15.85 GB) FAT32LBA ' p4 8200 25000 (16800 cylinders, 121.12 GB) PLAN9 empty 25000 25841 (841 cylinders, 6.06 GB) >>> w >>> q -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) The following unfinished tasks are ready to be done: prepdisk - subdivide plan 9 disk partition Task to do [prepdisk]: -------------------------------------- The following Plan 9 disk partitions were found. /dev/sdC0/plan9 empty 0 254016000 (254016000 sectors, 121.12 GB) Plan 9 partition to subdivide (/dev/sdC0/plan9)[/dev/sdC0/plan9]: This is disk/prep; use it to subdivide the Plan 9 partition. If it is not yet subdivided, a sensible layout will be suggested; you can probably just type 'w' and then 'q'. no plan9 partition table found 9fat 204800 nvram 1 fossil 252762623 swap 1048576 ' 9fat 0 204800 (204800 sectors, 100.00 MB) ' nvram 204800 204801 (1 sectors, 512 B ) ' fossil 204801 252967424 (252762623 sectors, 120.52 GB) ' swap 252967424 254016000 (1048576 sectors, 512.00 MB) >>> >>> w >>> q -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition The following unfinished tasks are ready to be done: fmtfossil - initialize disks for a fossil server Task to do [fmtfossil]: -------------------------------------- You have the following fossil partitions. Fossil partition to format (/dev/sdC0/fossil)[/dev/sdC0/fossil]: Done. -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server The following unfinished tasks are ready to be done: mountfs - choose and mount file system partition Task to do [mountfs]: -------------------------------------- The following partitions named fossil* were found. Please choose one to use as the installation file system for your Plan 9 installation. --rw-r----- S 0 glenda glenda 129414462976 Dec 16 2004 /dev/sdC0/fossil Fossil partition (/dev/sdC0/fossil)[/dev/sdC0/fossil]: -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server mountfs - choose and mount file system partition The following unfinished tasks are ready to be done: configdist - choose the source of the distribution archive download - download or continue to download the distribution archives Task to do [configdist]: -------------------------------------- Are you going to download the distribution from the internet or do you have it on local media? Distribution is from (local, net)[local]: -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server mountfs - choose and mount file system partition configdist - choose the source of the distribution archive The following unfinished tasks are ready to be done: mountdist - locate and mount the distribution download - download or continue to download the distribution archives Task to do [mountdist]: -------------------------------------- Please wait... Scanning storage devices... /dev/sdC0/9fat /dev/sdC0/data /dev/sdC0/dos /dev/sdC0/dos1 /dev/sdC0/fossil /dev/sdC0/nvram /dev/sdC0/swap /dev/sdD0/cdboot /dev/sdD0/data The following storage media were detected. Choose the one containing the distribution. /dev/sdC0/dos (microsoft fat) /dev/sdC0/dos1 (microsoft fat) /dev/sdD0/cdboot (microsoft fat) /dev/sdD0/data (iso9660 cdrom) Distribution disk [no default]: /dev/sdC0/dos Which directory contains the distribution? Any of the following will suffice (in order of preference): - the root directory of the cd image - the directory containing plan9.iso - the directory containing plan9.iso.bz2 Typing `browse' will put you in a shell that you can use to look for the directory. Location of archives [browse]: This is a simple shell. Commands are: cd directory - change to directory lc - list contents of current directory exit - exit shell Move to the directory containing the distribution and then exit. /% lc 9disk.flp pm_files plan9.iso prout.plan9.iso.bz2.sos /% exit -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server mountfs - choose and mount file system partition configdist - choose the source of the distribution archive mountdist - locate and mount the distribution The following unfinished tasks are ready to be done: copydist - copy the distribution into the file system Task to do [copydist]: -------------------------------------- -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server mountfs - choose and mount file system partition configdist - choose the source of the distribution archive mountdist - locate and mount the distribution copydist - copy the distribution into the file system The following unfinished tasks are ready to be done: bootsetup - create a boot floppy or configure hard disk to boot plan 9 Task to do [bootsetup]: -------------------------------------- Initializing Plan 9 FAT configuration partition (9fat) add 9load at clust 2 Initialising FAT file system type hard, 13 tracks, 240 heads, 63 sectors/track, 512 bytes/sec Adding file /n/kfs/386/9load, length 208708 add 9load at clust 2 used 210944 bytes used 0 bytes There are myriad ways to boot a Plan 9 system. You can use any of the following. (You can also repeat this task to use more than one). floppy - create a boot floppy plan9 - make the plan 9 disk partition the default for booting win9x - add a plan 9 option to windows 9x boot menu winnt - add a plan 9 option to windows nt/2000/xp boot manager (See the documentation for instructions on booting Plan 9 from LILO.) If you are upgrading an extant third edition installation and booting from something other than a floppy, you needn't run anything here. Just type ctl-d. Enable boot method (floppy, plan9, win9x, winnt)[no default]: plan9 Your Plan 9 partition is more than 2GB into your disk, and the master boot records used by Windows 9x/ME cannot access it (and thus cannot boot it). You can install the Plan 9 master boot record, which can load partitions far into the disk. If you use the Windows NT/2000/XP master boot record or a master boot record from a Unix clone (e.g., LILO or FreeBSD bootmgr, it is probably safe to continue using that boot record rather than install the Plan 9 boot record. Install the Plan 9 master boot record (y, n)[no default]: n The Plan 9 partition is now marked as active. -------------------------------------- Preparing menu... The following tasks are done: configfs - choose the type of file system to install partdisk - edit partition tables (e.g., to create a plan 9 partition) prepdisk - subdivide plan 9 disk partition fmtfossil - initialize disks for a fossil server mountfs - choose and mount file system partition configdist - choose the source of the distribution archive mountdist - locate and mount the distribution copydist - copy the distribution into the file system bootsetup - create a boot floppy or configure hard disk to boot plan 9 The following unfinished tasks are ready to be done: finish - finish the installation and reboot Task to do [finish]: -------------------------------------- Congratulations; you've completed the install. Halting file systems...disk/kfscmd: '/bin/disk/kfscmd' does not exist done Remember to take the install disk out of the drive. Feel free to turn off your computer.