From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <48f6e4966cbbc342261ccf397139b5a2@plan9.bell-labs.com>
From: "Russ Cox" <rsc@plan9.bell-labs.com>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] linksys etherfast 10/100 (lne100tx) v5 driver
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Date: Fri,  3 May 2002 11:38:19 -0400
Topicbox-Message-UUID: 877f98f6-eaca-11e9-9e20-41e7f4b1d025

> I'd appreciate if somebody takes a trouble and enlightens me on this:
> which driver should the card in question be using?
> I've tried both "pc2t" and "2114x" to no avail.  (even tried "pcmpc100")
> The chip is marked "linksys", not "pnic" or anything else.
> Linux is driving it via the tulip.o driver, if that matters.

This is a card with PCI device id 1317/0985.
The Linux driver calls it a Comet.  It looks
like it's close enough to what our 2114x
supports that it could be made to work with
only a little hassle, but it's far enough away
that it's not just a matter of adding the device
id to the driver list.

Sorry.
Russ