* [9fans] invisible hdd
@ 2005-04-27 14:53 Sergey Reva
2005-04-27 14:58 ` Sape Mullender
[not found] ` <038be620a95e5a242a6a475824b17e6e@plan9.bell-labs.com>
0 siblings, 2 replies; 5+ messages in thread
From: Sergey Reva @ 2005-04-27 14:53 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Hello Fans,
I have 2 hdd, SAMSUNG SP1213N (40Gb) and SAMSUNG SV4012H (120Gb)
when I boot from Plan 9 cd with 120Gb hdd work fine
when I boot from Plan 9 cd with 40Gb hdd it's does not see them
(BIOS recognize it correct, WinXP and Linux (Mandrake Move RE) also work with it)
when I boot from Plan 9 cd with both drives I see both drives!
I try different version of Plan 9 which I have, result the same
Also I try move drive to Master/Slave/Cable select modes...
Less than month ago I have only 40Gb drive, and Plan 9 worked with it fine
This I can get when plug both drives:
inquiry SAMSUNG SV4012H
config 045A capabilities 2B00 dma 00000004 dmactl 00000000 rwm 16 rwmctl 0
geometry 78242976 512 16383 16 63
part data 0 78242976
inquiry SAMSUNG SP1213N
config 045A capabilities 2F00 dma 00550020 dmactl 00000000 rwm 16 rwmctl 0 lba48always off
geometry 234493056 512 65535 1 63
part data 0 234493056
part ntfs 63 12289725
part ntfs1 12289788 43022070
part dos 43022133 53271540
part ntfs2 53271603 234484740
Does someone can suggest something?
--
http://rs-rlab.narod.ru mailto:rs_rlab@mail.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [9fans] invisible hdd
2005-04-27 14:53 [9fans] invisible hdd Sergey Reva
@ 2005-04-27 14:58 ` Sape Mullender
[not found] ` <038be620a95e5a242a6a475824b17e6e@plan9.bell-labs.com>
1 sibling, 0 replies; 5+ messages in thread
From: Sape Mullender @ 2005-04-27 14:58 UTC (permalink / raw)
To: rs_rlab, 9fans
> when I boot from Plan 9 cd with 40Gb hdd it's does not see them
When you have no disk in position 0, Plan 9 doesn't look in position 1.
So if you have sdC1 without sdC0, Plan 9 won't find the disk.
Sape
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [9fans] invisible hdd
[not found] ` <038be620a95e5a242a6a475824b17e6e@plan9.bell-labs.com>
@ 2005-04-27 15:10 ` Sergey Reva
2005-04-27 15:27 ` Russ Cox
0 siblings, 1 reply; 5+ messages in thread
From: Sergey Reva @ 2005-04-27 15:10 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs, Sape Mullender
Hello Sape,
Wednesday, April 27, 2005, 5:58:39 PM, you wrote:
SM> When you have no disk in position 0, Plan 9 doesn't look in position 1.
SM> So if you have sdC1 without sdC0, Plan 9 won't find the disk.
Even at Primary Master
--
http://rs-rlab.narod.ru mailto:rs_rlab@mail.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [9fans] invisible hdd
2005-04-27 15:10 ` Sergey Reva
@ 2005-04-27 15:27 ` Russ Cox
2005-04-27 17:37 ` Sergey Reva
0 siblings, 1 reply; 5+ messages in thread
From: Russ Cox @ 2005-04-27 15:27 UTC (permalink / raw)
To: Sergey Reva, Fans of the OS Plan 9 from Bell Labs
It may be related to the changes we made to support VMware
and QEMU a little better. Try the kernels in
9fs sourcesdump
ls /n/sourcesdump/2005/0315/386
and see if your luck changes.
Russ
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [9fans] invisible hdd
2005-04-27 15:27 ` Russ Cox
@ 2005-04-27 17:37 ` Sergey Reva
0 siblings, 0 replies; 5+ messages in thread
From: Sergey Reva @ 2005-04-27 17:37 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Hello Fans,
Wednesday, April 27, 2005, 6:27:34 PM, you wrote:
RC> ls /n/sourcesdump/2005/0315/386
I have much older kernels, and as I say it work in a past...
Just now I test hdd on other system, and system hung while startup in BIOS(!),
this is probably problem in hardware :(
--
http://rs-rlab.narod.ru mailto:rs_rlab@mail.ru
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-04-27 17:37 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-04-27 14:53 [9fans] invisible hdd Sergey Reva
2005-04-27 14:58 ` Sape Mullender
[not found] ` <038be620a95e5a242a6a475824b17e6e@plan9.bell-labs.com>
2005-04-27 15:10 ` Sergey Reva
2005-04-27 15:27 ` Russ Cox
2005-04-27 17:37 ` Sergey Reva
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).