From mboxrd@z Thu Jan  1 00:00:00 1970
Content-Type: text/plain; charset=windows-1252
Mime-Version: 1.0 (Apple Message framework v1084)
From: Daniel Lyons <fusion@storytotell.org>
In-Reply-To: <1B92247E-7395-4001-B962-182457A7B4D3@9srv.net>
Date: Fri,  6 May 2011 22:46:17 -0600
Content-Transfer-Encoding: quoted-printable
Message-Id: <5C5A1FF0-47CC-4741-A909-23032BF46E7F@storytotell.org>
References: <2FFCB958-CD20-4E6B-9164-AA5DEADD866E@storytotell.org>
	<1B92247E-7395-4001-B962-182457A7B4D3@9srv.net>
To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net>
Subject: Re: [9fans] Parallels 6
Topicbox-Message-UUID: e0a21682-ead6-11e9-9d60-3106f5b1d025


On May 6, 2011, at 1:36 AM, Anthony Sorace wrote:
>> 2. Ethernet card is not detected. I am not 100% sure there's nothing =
different in the configuration, but I've made the plan9.ini look the =
same in both VMs and still it fails to detect the NE2000 emulated =
ethernet card. There are also ominous messages about usbd: no hub during =
bootup that don't happen under the old one.
>=20
> Ethernet works here (and did under Parallels 5, as well), and I've got =
nothing in plan9.ini to trick it. You don't see the device at all (not =
just no data or whatnot)?

No device at all. In frustration, I added the following to my plan9.ini:

*noetherprobe=3D1
ether0=3Dne2000

This had no effect either. I didn't have to do anything interesting for =
the old image either, I don't think.

>> Is there a boot log somewhere I can examine for messages I may not =
have seen, or any other debugging information I can go looking for?
>=20
> /dev/kmesg will give you the console prints so far; /dev/kprint will =
wait for new ones (and prevent them going to your actual console).

OK, so after so many bytes free, I get this:

cpu0: 2671MHz GenuineIntel Core i5 (cpuid: AX 0x20655 DX 0x1F8BFBFF)
ELCR: 0E80
256M memory: 105M kernel data, 151M user, 574M swap
usbinit...usbd..../boot/usbd: /dev/usb: no hubs
no usbd...no usb disk...auth...usbinit...usbd.../boot/usbd: /dev/usb: no =
hubs
no usbd...no usb disk...mount usbd...boot: can't open /srv/usb: =
'/srv/usb' file does not exist
time...
fossil(#S/sdC0/fossil)...version...time...
can't stat /srv/parts.sdXX: '/srv/partfs.sdXX' file does not exist

init: starting /bin/rc

And that's it, nothing particularly interesting. What else can I do to =
debug this?

Thanks,

=97=20
Daniel Lyons