Re: [9fans] Booting plan9 from an iSCSI disk

[Gabriel Diaz Lopez de la Llave <gdiaz@9grid.es>]

[-- Attachment #1: Type: text/plain, Size: 3135 bytes --]

Hello

I just need to boot the kenel, this machine is rented, i can't change  
any hardware configuration, i can just try to get plan9 running there  
with the help of qemu. . .

I installed  a fossil terminal, now i need to instruct 9load to read  
the kernel from /dev/sdB0, and if the kernel loads, i need to instruct  
it to use 9grid.es as the fs and auth.

I will post the results of these tests if they are possitive.

thanks!

gabi

El 22/10/2008, a las 17:47, Sergey Zhilkin escribió:

> Hi !
>
> Use 9P instead of iSCSI. In My setup, I use small IDE Flash drives  
> (128Mb) They works just fine ! :)
>
> 2008/10/20 <gdiaz@9grid.es>
> Hola,
>
> Has anyone done this?
>
> I have access to a cheap hardware which could be a nice plan9 cpu  
> server, the only thing does not work
> is the iSCSI disk (or i think so, look at the lspci below)
>
> I suppose the bios of the machine supports booting from iSCSI, so i  
> think i could put a 9load or
> 9pxeload there,  but 9load is not able to load a kernel from iSCSI  
> and i suppose i can't instruct 9pxeload
> to boot from specific server without using bootp/dhcp to boot, right?
>
> any tips on how to make this little thing work? (besides writing  
> iSCSI support for 9load)
>
> here is he lspci output (it is a dualcore atom 1.6ghz intel board,  
> 1gb of ram):
>
>
> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory  
> Controller Hub (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ  
> Integrated Graphics Controller (rev
> 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI  
> Express Port 1 (rev 01)
> 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI  
> Express Port 3 (rev 01)
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI  
> Express Port 4 (rev 01)
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
> UHCI Controller #1 (rev 01)
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
> UHCI Controller #2 (rev 01)
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
> UHCI Controller #3 (rev 01)
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
> UHCI Controller #4 (rev 01)
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2  
> EHCI Controller (rev 01)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC  
> Interface Bridge (rev 01)
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE  
> Controller (rev 01)
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)  
> SATA IDE Controller (rev 01)
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus  
> Controller (rev 01)
> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.  
> RTL8111/8168B PCI Express Gigabit
> Ethernet controller (rev 02)
>
> thanks
>
> gabi
> PS: it has an ide controller but with no disks attached
>
>
>
>
>
>
> -- 
> С Уважением
> Жилкин Сергей


[-- Attachment #2: Type: text/html, Size: 3677 bytes --]