From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sat, 9 Jul 2011 00:26:11 +0000 From: Eris Discordia To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net> Message-ID: <6F7509F3840C27B44BBE7F9F@[192.168.1.2]> In-Reply-To: References: <98341AF97AF04C5D2915B463@192.168.1.2> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: Re: [9fans] Plan 9 on VIA C7 Topicbox-Message-UUID: fc7a05f4-ead6-11e9-9d60-3106f5b1d025 Very good point. And, an extremely tempting experiment you have introduced me/us to out of your mighty rucksack. Could prove to be the downfall of me, buying a few more PC-104 (don't need be PC-104+, right?) Geode boards (I already got one based on LX 800). Thank you :-) Then, even without active cooling heat does flow more rapidly from a hotter source to the ambient reservoir than from a cooler source. However, even if you manage to get as cool as the cooler source by throwing in lightweight active cooling you have barely arrived at the start line. Besides, you know far far far better than I, final temperatures equal, heat dissipated thus shows up on your electricity bill. (May be negligible for running just a few such cores.) If given a choice I'd go with something that does not generate the heat in the first place. --On Friday, July 08, 2011 14:59 -0700 ron minnich wrote: > Systems that get hot as hell can need a surprisingly small amount of > air motion to cool down. > > I built this minicluster that got incredibly hot, i.e. you could burn > yourself on it: > http://tinyurl.com/3o229ho > > What you see strapped to it is a 12V fan from a dell desktop which I > ran at 5V, not 12V (a trick I learned from John DeGood). Very little > air had to move, it was noiseless, and it all cooled right down. You > don't need huge noisy fans in all cases. > > ron >