From: erik quanstrom <quanstro@quanstro.net>
To: 9fans@9fans.net
Subject: Re: [9fans] usb configuration
Date: Mon, 3 Mar 2014 09:27:19 -0500 [thread overview]
Message-ID: <742c4d892a31e0f1039a8368a4283b2e@mikro.quanstro.net> (raw)
In-Reply-To: <4638b6b88153b39703eefcdb696879dd@hamnavoe.com>
so the keyboard is not working, and usbd gets the closedevice message,
but usb/kb doesn't exit. could there be some confusion about which devices
belong to which hubs.
- erik
---
#l3: i40: 40000Mbps port 0xfffffe00f9000000 tbdf 2.0.1 tu 1514 6805ca1f72f1
acpi: enable interrupt
/boot/usbd: /dev/usb/ep1.0 starting
/boot/usbd: opendev 0x439bd8 /dev/usb/ep1.0
/boot/usbd: /dev/usb/ep1.0: ports 2 maxpkt 64
/boot/usbd: hub 0x439b78 allocated: ports 2 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
/boot/usbd: /dev/usb/ep2.0 starting
/boot/usbd: opendev 0x439db8 /dev/usb/ep2.0
/boot/usbd: /dev/usb/ep2.0: ports 2 maxpkt 64
/boot/usbd: hub 0x439d58 allocated: ports 2 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
/boot/usbd: /dev/usb/ep2.0: port 1 attach sts 0x401
/boot/usbd: /dev/usb/ep2.0: port 1: attached status 0x403
/boot/usbd: opendev 0x439f38 /dev/usb/ep3.0
/boot/usbd; /dev/usb/ep2.0: port 1: maxpkt 64
/boot/usbd: /dev/usb/ep3.0 csp hub.0.1 vid 0x8087 did 0x0024 refs 1
none <nil> <nil>
conf: cval 1 attrib e0 0 mA
iface csp hub.0.0
alt 0 attr 3 ival 12
ep id 1 addr 129 dir in type intr itype 0 maxpkt 1 ntds 1
/boot/usbd: /dev/usb/ep2.0: port 1: configed: /dev/usb/ep3.0
/boot/usbd: hub 0x43a858 allocated: ports 6 pwrms 100 max curr 0 pwrm 1 cmp 0 leds 0
usb/hub... /boot/usbd: /dev/usb/ep3.0 port 1: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep3.0: port 2 attach sts 0x101
/boot/usbd: /dev/usb/ep3.0: port 2: attached status 0x103
/boot/usbd: opendev 0x43a8b8 /dev/usb/ep4.0
/boot/usbd; /dev/usb/ep3.0: port 2: maxpkt 8
/boot/usbd: /dev/usb/ep4.0 csp hub.0.0 vid 0x05ac did 0x1003 refs 1
Mitsumi ElectricB Hub in Apple Extended USB Keyboard none
conf: cval 1 attrib a0 50 mA
iface csp hub.0.0
alt 0 attr 3 ival 255
ep id 1 addr 129 dir in type intr itype 0 maxpkt 1 ntds 1
/boot/usbd: /dev/usb/ep3.0: port 2: configed: /dev/usb/ep4.0
/boot/usbd: hub 0x4291c8 allocated: ports 3 pwrms 100 max curr 50 pwrm 1 cmp 1 leds 0
usb/hub... /boot/usbd: /dev/usb/ep4.0 port 1: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep4.0 port 2: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep4.0: port 3 attach sts 0x101
/boot/usbd: /dev/usb/ep4.0: port 3: attached status 0x103
/boot/usbd: opendev 0x429308 /dev/usb/ep5.0
/boot/usbd: /dev/usb/ep4.0: port 3: attach setaddress: transaction error
/boot/usbd: closedev 0x429308 /dev/usb/ep5.0
/boot/usbd: /dev/usb/ep3.0 port 2: sts p 0x101 -> ep 0x103
/boot/usbd: /dev/usb/ep3.0 port 3: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep3.0 port 4: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep3.0 port 5: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep3.0 port 6: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep2.0 port 1: sts hp 0x401 -> hep 0x403
/boot/usbd: /dev/usb/ep1.0: port 1 attach sts 0x401
/boot/usbd: /dev/usb/ep1.0: port 1: attached status 0x403
/boot/usbd: opendev 0x429308 /dev/usb/ep5.0
/boot/usbd; /dev/usb/ep1.0: port 1: maxpkt 64
/boot/usbd: /dev/usb/ep5.0 csp hub.0.1 vid 0x8087 did 0x0024 refs 1
none <nil> <nil>
conf: cval 1 attrib e0 0 mA
iface csp hub.0.0
alt 0 attr 3 ival 12
ep id 1 addr 129 dir in type intr itype 0 maxpkt 1 ntds 1
/boot/usbd: /dev/usb/ep1.0: port 1: configed: /dev/usb/ep5.0
/boot/usbd: hub 0x429c28 allocated: ports 6 pwrms 100 max curr 0 pwrm 1 cmp 0 leds 0
usb/hub... /boot/usbd: /dev/usb/ep5.0 port 1: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep5.0: port 2 attach sts 0x101
/boot/usbd: /dev/usb/ep5.0: port 2: attached status 0x103
/boot/usbd: opendev 0x429e08 /dev/usb/ep6.0
/boot/usbd; /dev/usb/ep5.0: port 2: maxpkt 64
/boot/usbd: /dev/usb/ep6.0 csp hid.1.2 vid 0x0557 did 0x2221 refs 1
Winbond Electronics CorpB Hermon USB hidmouse Device none
conf: cval 1 attrib e0 100 mA
iface csp hid.1.2
alt 0 attr 3 ival 10
ep id 2 addr 130 dir in type intr itype 0 maxpkt 8 ntds 1
iface csp hid.1.1
alt 0 attr 3 ival 10
ep id 1 addr 129 dir in type intr itype 0 maxpkt 8 ntds 1
dev desc 21[9]: 09 21 00 01 00 01 22 4f 00
dev desc 21[9]: 09 21 00 01 00 01 22 40 00
/boot/usbd: /dev/usb/ep5.0: port 2: configed: /dev/usb/ep6.0
/boot/usbd: start: kb -N 0 -d
/boot/usbd: opendev 0x42b7e8 /dev/usb/ep6.0
kb: main: dev /dev/usb/ep6.0 ref 1
usb/kb... /boot/usbd: opendev 0x42ac08 /dev/usb/ep6.1
/boot/usbd: /dev/usb/ep6.1: maxpkt 8
/boot/usbd: /dev/usb/ep6.1: ntds 1
setting boot protocol
kb: #m/mousein: unknown device in # filename
/boot/usbd: /dev/usb/ep5.0 port 3: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep5.0 port 4: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep5.0 port 5: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep5.0 port 6: sts - 0x0 -> - 0x100
/boot/usbd: /dev/usb/ep1.0 port 1: sts hp 0x401 -> hep 0x403
/boot/usbd: fsadd usbdctl
sdE0: llba 976,773,168 512-byte sectors
ST9500530NS SN04 9SP1HX8K [newdrive]
ipconfig...PFPG 0
/boot/usbd: /dev/usb/ep5.0 port 2: sts p 0x101 -> ep 0x103
connect...
version...t.
icr 02000000 00000000 00000000
icr 04000000 80100401 00000004
#l3: i40:pf 1: hmcerr 80100401 00000004
init: starting /bin/rc
ivey# ps -a | grep kb
bootes 3 0:00 0:00 0K Wakeme conskbdq
bootes 4 0:00 0:00 0K Wakeme conskbdq
bootes 9 0:00 0:00 4096K Pread usbd [kbd /dev/usb/ep6.1]
bootes 10 0:00 0:00 4096K Rendez usbd [kbd repeat]
bootes 11 0:00 0:00 4096K Sleep usbd [kbd reptimer]
bootes 160 0:00 0:00 4096K Pread grep kb
ivey#
ivey#
ivey#
ivey# /boot/usbd: /dev/usb/ep3.0: port 2: detached
/boot/usbd: closing hub 0x4291c8
/boot/usbd: closedev 0x43a8b8 /dev/usb/ep4.0
ivey# ps -a | grep kbd
bootes 3 0:00 0:00 0K Wakeme conskbdq
bootes 4 0:00 0:00 0K Wakeme conskbdq
bootes 9 0:00 0:00 4096K Pread usbd [kbd /dev/usb/ep6.1]
bootes 10 0:00 0:00 4096K Rendez usbd [kbd repeat]
bootes 11 0:00 0:00 4096K Sleep usbd [kbd reptimer]
bootes 164 0:00 0:00 4096K Pread grep kbd
next prev parent reply other threads:[~2014-03-03 14:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-03 13:37 Richard Miller
2014-03-03 13:45 ` erik quanstrom
2014-03-03 13:52 ` Richard Miller
2014-03-03 14:27 ` erik quanstrom [this message]
2014-03-03 14:42 ` cinap_lenrek
2014-03-03 14:56 ` Richard Miller
2014-03-03 15:24 ` cinap_lenrek
2014-03-03 15:32 ` erik quanstrom
2014-03-03 15:37 ` erik quanstrom
2014-03-03 17:29 ` Ramakrishnan Muthukrishnan
2014-03-03 17:32 ` erik quanstrom
2014-03-03 17:41 ` Ramakrishnan Muthukrishnan
2014-03-03 18:24 ` Joseph Thompson
2014-03-03 18:25 ` erik quanstrom
2014-03-04 11:11 ` Nicolas Bercher
2014-03-04 11:28 ` Steve Simon
2014-03-04 17:40 ` Mark van Atten
2014-03-05 9:29 ` Nicolas Bercher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=742c4d892a31e0f1039a8368a4283b2e@mikro.quanstro.net \
--to=quanstro@quanstro.net \
--cc=9fans@9fans.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).