* [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials @ 2009-01-09 14:17 Rudolf Sykora 2009-01-09 14:34 ` erik quanstrom ` (2 more replies) 0 siblings, 3 replies; 24+ messages in thread From: Rudolf Sykora @ 2009-01-09 14:17 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Hello, I tried to install plan9 on one of my computers and wanted to update it running 'pull'. However, it doesn't work, perhaps because the home pages of plan9 at Bell labs don't work. I somehow have a feeling there are problems with those pages every now and then. Is it so? Why? May some mirror be used instead? If yes, what and how do I have to modify so that 'pull' then works? Also. My computer is Acer Travelmate 291LCi. It has a touchpad (2 buttons) and I want to use a usb mouse. After installation the touchpad works, but connected external mouse does not. Why? What do I have to do? There is a message saying something like '/dev/usb0/1/ep0data does not exists'. Last, the computer has a 1400x1050 screen, which is somehow not listed in its Bios table, so that I had to run some program to help it under linux (something like 855patch ; http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on board). Is there a chance it would work in plan9? What do I have to do? Thanks Ruda ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 14:17 [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials Rudolf Sykora @ 2009-01-09 14:34 ` erik quanstrom 2009-01-09 15:00 ` sqweek 2009-01-09 16:37 ` Gabriel Diaz Lopez de la Llave 2 siblings, 0 replies; 24+ messages in thread From: erik quanstrom @ 2009-01-09 14:34 UTC (permalink / raw) To: 9fans > http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on > board). Is there a chance it would work in plan9? What do I have to > do? there was a guy around here who worked up that bios patch for plan 9. (translated, oddly enough, from the original oberon.) i'll try to hunt it down. i can't currently locate it. but if it can't be found, the linux version should be easy enough to translate. - erik ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 14:17 [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials Rudolf Sykora 2009-01-09 14:34 ` erik quanstrom @ 2009-01-09 15:00 ` sqweek 2009-01-09 16:37 ` Gabriel Diaz Lopez de la Llave 2 siblings, 0 replies; 24+ messages in thread From: sqweek @ 2009-01-09 15:00 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs; +Cc: 9trouble On Fri, Jan 9, 2009 at 11:17 PM, Rudolf Sykora <rudolf.sykora@gmail.com> wrote: > I tried to install plan9 on one of my computers and wanted to update > it running 'pull'. However, it doesn't work, perhaps because the home > pages of plan9 at Bell labs don't work. I somehow have a feeling there > are problems with those pages every now and then. Is it so? Why? Yeah, I can't connect to sources at the moment. I get as far as "post..." and then 9fs blocks. -sqweek ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 14:17 [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials Rudolf Sykora 2009-01-09 14:34 ` erik quanstrom 2009-01-09 15:00 ` sqweek @ 2009-01-09 16:37 ` Gabriel Diaz Lopez de la Llave 2009-01-09 16:51 ` Francisco J Ballesteros 2 siblings, 1 reply; 24+ messages in thread From: Gabriel Diaz Lopez de la Llave @ 2009-01-09 16:37 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Hello As soon as the new mirror method mentioned by Geoff becomes the official way to sync mirrors i will update the 9grid.es mirror and i will provide the scripts to pull from 9grid.es again Gabi El 09/01/2009, a las 15:17, "Rudolf Sykora" <rudolf.sykora@gmail.com> escribió: > Hello, > > I tried to install plan9 on one of my computers and wanted to update > it running 'pull'. However, it doesn't work, perhaps because the home > pages of plan9 at Bell labs don't work. I somehow have a feeling there > are problems with those pages every now and then. Is it so? Why? > > May some mirror be used instead? > If yes, what and how do I have to modify so that 'pull' then works? > > Also. My computer is Acer Travelmate 291LCi. It has a touchpad (2 > buttons) and I want to use a usb mouse. After installation the > touchpad works, but connected external mouse does not. Why? What do I > have to do? There is a message saying something like > '/dev/usb0/1/ep0data does not exists'. > Last, the computer has a 1400x1050 screen, which is somehow not listed > in its Bios table, so that I had to run some program to help it under > linux (something like 855patch ; > http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on > board). Is there a chance it would work in plan9? What do I have to > do? > > Thanks > Ruda > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 16:37 ` Gabriel Diaz Lopez de la Llave @ 2009-01-09 16:51 ` Francisco J Ballesteros 2009-01-09 17:36 ` Gabriel Diaz Lopez de la Llave 0 siblings, 1 reply; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-09 16:51 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Sorry, which new mirror method? I probably missed that. We keep a mirror of sources/plan9 and 9grid at sources.lsub.org. On Fri, Jan 9, 2009 at 5:37 PM, Gabriel Diaz Lopez de la Llave <gdiaz@9grid.es> wrote: > Hello > > As soon as the new mirror method mentioned by Geoff becomes the official way > to sync mirrors i will update the 9grid.es mirror and i will provide the > scripts to pull from 9grid.es again > > Gabi > > > > El 09/01/2009, a las 15:17, "Rudolf Sykora" <rudolf.sykora@gmail.com> > escribió: > >> Hello, >> >> I tried to install plan9 on one of my computers and wanted to update >> it running 'pull'. However, it doesn't work, perhaps because the home >> pages of plan9 at Bell labs don't work. I somehow have a feeling there >> are problems with those pages every now and then. Is it so? Why? >> >> May some mirror be used instead? >> If yes, what and how do I have to modify so that 'pull' then works? >> >> Also. My computer is Acer Travelmate 291LCi. It has a touchpad (2 >> buttons) and I want to use a usb mouse. After installation the >> touchpad works, but connected external mouse does not. Why? What do I >> have to do? There is a message saying something like >> '/dev/usb0/1/ep0data does not exists'. >> Last, the computer has a 1400x1050 screen, which is somehow not listed >> in its Bios table, so that I had to run some program to help it under >> linux (something like 855patch ; >> http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on >> board). Is there a chance it would work in plan9? What do I have to >> do? >> >> Thanks >> Ruda >> >> > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 16:51 ` Francisco J Ballesteros @ 2009-01-09 17:36 ` Gabriel Diaz Lopez de la Llave 2009-01-09 20:42 ` Uriel 0 siblings, 1 reply; 24+ messages in thread From: Gabriel Diaz Lopez de la Llave @ 2009-01-09 17:36 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs hello Geoff is working to get a replica/pull set up to mirror /n/sources. 9grid.es stopped mirrorning since this started, and i'm trying from time to time to use the replica/pull system to mirror sources. sorry but i can't remember the message on which Geoff talked about this. gabi El 09/01/2009, a las 17:51, Francisco J Ballesteros escribió: > Sorry, which new mirror method? > > I probably missed that. > We keep a mirror of sources/plan9 and 9grid at sources.lsub.org. > > > On Fri, Jan 9, 2009 at 5:37 PM, Gabriel Diaz Lopez de la Llave > <gdiaz@9grid.es> wrote: >> Hello >> >> As soon as the new mirror method mentioned by Geoff becomes the >> official way >> to sync mirrors i will update the 9grid.es mirror and i will >> provide the >> scripts to pull from 9grid.es again >> >> Gabi >> >> >> >> El 09/01/2009, a las 15:17, "Rudolf Sykora" <rudolf.sykora@gmail.com> >> escribió: >> >>> Hello, >>> >>> I tried to install plan9 on one of my computers and wanted to update >>> it running 'pull'. However, it doesn't work, perhaps because the >>> home >>> pages of plan9 at Bell labs don't work. I somehow have a feeling >>> there >>> are problems with those pages every now and then. Is it so? Why? >>> >>> May some mirror be used instead? >>> If yes, what and how do I have to modify so that 'pull' then works? >>> >>> Also. My computer is Acer Travelmate 291LCi. It has a touchpad (2 >>> buttons) and I want to use a usb mouse. After installation the >>> touchpad works, but connected external mouse does not. Why? What >>> do I >>> have to do? There is a message saying something like >>> '/dev/usb0/1/ep0data does not exists'. >>> Last, the computer has a 1400x1050 screen, which is somehow not >>> listed >>> in its Bios table, so that I had to run some program to help it >>> under >>> linux (something like 855patch ; >>> http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on >>> board). Is there a chance it would work in plan9? What do I have to >>> do? >>> >>> Thanks >>> Ruda >>> >>> >> >> ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 17:36 ` Gabriel Diaz Lopez de la Llave @ 2009-01-09 20:42 ` Uriel 2009-01-09 20:54 ` Francisco J Ballesteros 0 siblings, 1 reply; 24+ messages in thread From: Uriel @ 2009-01-09 20:42 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs What was wrong with the old way of doing mirroring with lsr? It worked quite nicely, and was way more reliable and infinitely faster than replica. uriel On Fri, Jan 9, 2009 at 6:36 PM, Gabriel Diaz Lopez de la Llave <gdiaz@9grid.es> wrote: > hello > > Geoff is working to get a replica/pull set up to mirror /n/sources. > > 9grid.es stopped mirrorning since this started, and i'm trying from time to > time to use the replica/pull system to mirror sources. > > sorry but i can't remember the message on which Geoff talked about this. > > gabi > > > El 09/01/2009, a las 17:51, Francisco J Ballesteros escribió: > >> Sorry, which new mirror method? >> >> I probably missed that. >> We keep a mirror of sources/plan9 and 9grid at sources.lsub.org. >> >> >> On Fri, Jan 9, 2009 at 5:37 PM, Gabriel Diaz Lopez de la Llave >> <gdiaz@9grid.es> wrote: >>> >>> Hello >>> >>> As soon as the new mirror method mentioned by Geoff becomes the official >>> way >>> to sync mirrors i will update the 9grid.es mirror and i will provide the >>> scripts to pull from 9grid.es again >>> >>> Gabi >>> >>> >>> >>> El 09/01/2009, a las 15:17, "Rudolf Sykora" <rudolf.sykora@gmail.com> >>> escribió: >>> >>>> Hello, >>>> >>>> I tried to install plan9 on one of my computers and wanted to update >>>> it running 'pull'. However, it doesn't work, perhaps because the home >>>> pages of plan9 at Bell labs don't work. I somehow have a feeling there >>>> are problems with those pages every now and then. Is it so? Why? >>>> >>>> May some mirror be used instead? >>>> If yes, what and how do I have to modify so that 'pull' then works? >>>> >>>> Also. My computer is Acer Travelmate 291LCi. It has a touchpad (2 >>>> buttons) and I want to use a usb mouse. After installation the >>>> touchpad works, but connected external mouse does not. Why? What do I >>>> have to do? There is a message saying something like >>>> '/dev/usb0/1/ep0data does not exists'. >>>> Last, the computer has a 1400x1050 screen, which is somehow not listed >>>> in its Bios table, so that I had to run some program to help it under >>>> linux (something like 855patch ; >>>> http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on >>>> board). Is there a chance it would work in plan9? What do I have to >>>> do? >>>> >>>> Thanks >>>> Ruda >>>> >>>> >>> >>> > > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 20:42 ` Uriel @ 2009-01-09 20:54 ` Francisco J Ballesteros 2009-01-09 22:24 ` Nathaniel W Filardo 0 siblings, 1 reply; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-09 20:54 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs it's not reliable. I had to fix several things, but the main problem is that it's not coherent wrt sources. You might end up with incosistent files, depending on when lsr runs. I'm using a variant of lsr, but I'm looking forward to a more coherent way of doing it. On Fri, Jan 9, 2009 at 9:42 PM, Uriel <uriel99@gmail.com> wrote: > What was wrong with the old way of doing mirroring with lsr? It worked > quite nicely, and was way more reliable and infinitely faster than > replica. > > uriel > > On Fri, Jan 9, 2009 at 6:36 PM, Gabriel Diaz Lopez de la Llave > <gdiaz@9grid.es> wrote: >> hello >> >> Geoff is working to get a replica/pull set up to mirror /n/sources. >> >> 9grid.es stopped mirrorning since this started, and i'm trying from time to >> time to use the replica/pull system to mirror sources. >> >> sorry but i can't remember the message on which Geoff talked about this. >> >> gabi >> >> >> El 09/01/2009, a las 17:51, Francisco J Ballesteros escribió: >> >>> Sorry, which new mirror method? >>> >>> I probably missed that. >>> We keep a mirror of sources/plan9 and 9grid at sources.lsub.org. >>> >>> >>> On Fri, Jan 9, 2009 at 5:37 PM, Gabriel Diaz Lopez de la Llave >>> <gdiaz@9grid.es> wrote: >>>> >>>> Hello >>>> >>>> As soon as the new mirror method mentioned by Geoff becomes the official >>>> way >>>> to sync mirrors i will update the 9grid.es mirror and i will provide the >>>> scripts to pull from 9grid.es again >>>> >>>> Gabi >>>> >>>> >>>> >>>> El 09/01/2009, a las 15:17, "Rudolf Sykora" <rudolf.sykora@gmail.com> >>>> escribió: >>>> >>>>> Hello, >>>>> >>>>> I tried to install plan9 on one of my computers and wanted to update >>>>> it running 'pull'. However, it doesn't work, perhaps because the home >>>>> pages of plan9 at Bell labs don't work. I somehow have a feeling there >>>>> are problems with those pages every now and then. Is it so? Why? >>>>> >>>>> May some mirror be used instead? >>>>> If yes, what and how do I have to modify so that 'pull' then works? >>>>> >>>>> Also. My computer is Acer Travelmate 291LCi. It has a touchpad (2 >>>>> buttons) and I want to use a usb mouse. After installation the >>>>> touchpad works, but connected external mouse does not. Why? What do I >>>>> have to do? There is a message saying something like >>>>> '/dev/usb0/1/ep0data does not exists'. >>>>> Last, the computer has a 1400x1050 screen, which is somehow not listed >>>>> in its Bios table, so that I had to run some program to help it under >>>>> linux (something like 855patch ; >>>>> http://www.chzsoft.com.ar/855patch.html ; it has a 810i graphics on >>>>> board). Is there a chance it would work in plan9? What do I have to >>>>> do? >>>>> >>>>> Thanks >>>>> Ruda >>>>> >>>>> >>>> >>>> >> >> >> > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 20:54 ` Francisco J Ballesteros @ 2009-01-09 22:24 ` Nathaniel W Filardo 2009-01-16 9:28 ` Rudolf Sykora 0 siblings, 1 reply; 24+ messages in thread From: Nathaniel W Filardo @ 2009-01-09 22:24 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs [-- Attachment #1: Type: text/plain, Size: 1615 bytes --] On Fri, Jan 09, 2009 at 09:54:02PM +0100, Francisco J Ballesteros wrote: > it's not reliable. > I had to fix several things, but the main problem is that > it's not coherent wrt sources. You might end up with incosistent > files, depending on when lsr runs. > > I'm using a variant of lsr, but I'm looking forward to a more > coherent way of doing it. I am still missing something (and did not get a response on an earlier attempt at asking a slightly different question), but... why doesn't sources 1) allow read-only access to its backing venti to the Internet at large 2) nightly run a full vac job against the nightly dump [1] as none [2] and 3) publish the score so derived? [3] This makes "venti/copy -f" an excellent mirroring mechanism; mirrors would be only very slightly lagged from the official sources (see [1]), and it would seem to have only very modest bandwidth requirements relative to full tree traversal. If this an acceptable mechanism (I don't see anything wrong with it, but I've been wrong before), I'd be very happy if somebody seeded the system with the dumps already taken. [1] And/or snapshots. Those would work just as well, be just as coherent, and be more frequent in case nightly crawls aren't good enough. [2] Running as none means that only world-readable files get included in the published capabilities. Presumably that's exactly the class that would be mirrored. [3] A vac archive generated by merging each run's vac output, say, with the last run's root score published at the root of sources? Thanks much. --nwf; [-- Attachment #2: Type: application/pgp-signature, Size: 204 bytes --] ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-09 22:24 ` Nathaniel W Filardo @ 2009-01-16 9:28 ` Rudolf Sykora 2009-01-28 13:48 ` Rudolf Sykora 0 siblings, 1 reply; 24+ messages in thread From: Rudolf Sykora @ 2009-01-16 9:28 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Hello list, --- so is there any place where I could read how to set up my usb mouse, step by step? (As I mentioned, now my touchpad works but mouse -- Genius NetScroll EYE/USB -- does not.) --- whatabout sound? Does anybody have Realtek AC97 audio working? --- Video Intel 82852/82855 GM/GME --- hopefully will work with those patches mentioned by E. Quanstrom :) (thanks) --- finally wifi: Intel PRO/Wireless LAN 2100 3B Mini PCI adapter? (I couldn't find anything about this...) Thank you Ruda > Also. My computer is Acer Travelmate 291LCi. ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-16 9:28 ` Rudolf Sykora @ 2009-01-28 13:48 ` Rudolf Sykora 2009-01-28 13:53 ` Francisco J Ballesteros 2009-01-28 15:21 ` Steve Simon 0 siblings, 2 replies; 24+ messages in thread From: Rudolf Sykora @ 2009-01-28 13:48 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs 2009/1/16 Rudolf Sykora <rudolf.sykora@gmail.com>: > Hello list, > > --- so is there any place where I could read how to set up my usb > mouse, step by step? (As I mentioned, now my touchpad works but mouse > -- Genius NetScroll EYE/USB -- does not.) > > --- whatabout sound? Does anybody have Realtek AC97 audio working? > > --- Video Intel 82852/82855 GM/GME --- hopefully will work with those > patches mentioned by E. Quanstrom :) (thanks) > > --- finally wifi: Intel PRO/Wireless LAN 2100 3B Mini PCI adapter? (I > couldn't find anything about this...) > > Thank you > Ruda > > >> Also. My computer is Acer Travelmate 291LCi. > Well, still no one can say a word? I made several attempts to set up my mouse, but those were all futile... And I need a mouse in this mouse-centric system, my touchpad has only 2 buttons. Can it be so that both, a touchpad (behaves I guess as a ps2 device) and a usb mouse work at the same time? Secondly, is there any chance the wifi I have would work? What should I read in order to know how to proceed? Thanks Ruda ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 13:48 ` Rudolf Sykora @ 2009-01-28 13:53 ` Francisco J Ballesteros 2009-01-28 14:58 ` Rudolf Sykora 2009-01-28 15:21 ` Steve Simon 1 sibling, 1 reply; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-28 13:53 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Just noticed this mail. Did you try with usb/kb ? Does it have problems handling your mouse? In general, usbstart should do the thing for you. On Wed, Jan 28, 2009 at 2:48 PM, Rudolf Sykora <rudolf.sykora@gmail.com> wrote: > 2009/1/16 Rudolf Sykora <rudolf.sykora@gmail.com>: >> Hello list, >> >> --- so is there any place where I could read how to set up my usb >> mouse, step by step? (As I mentioned, now my touchpad works but mouse >> -- Genius NetScroll EYE/USB -- does not.) >> >> --- whatabout sound? Does anybody have Realtek AC97 audio working? >> >> --- Video Intel 82852/82855 GM/GME --- hopefully will work with those >> patches mentioned by E. Quanstrom :) (thanks) >> >> --- finally wifi: Intel PRO/Wireless LAN 2100 3B Mini PCI adapter? (I >> couldn't find anything about this...) >> >> Thank you >> Ruda >> >> >>> Also. My computer is Acer Travelmate 291LCi. >> > > Well, still no one can say a word? > I made several attempts to set up my mouse, but those were all futile... > And I need a mouse in this mouse-centric system, my touchpad has only 2 buttons. > Can it be so that both, a touchpad (behaves I guess as a ps2 device) > and a usb mouse work at the same time? > > Secondly, is there any chance the wifi I have would work? What should > I read in order to know how to proceed? > > Thanks > Ruda > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 13:53 ` Francisco J Ballesteros @ 2009-01-28 14:58 ` Rudolf Sykora 2009-01-28 15:19 ` Francisco J Ballesteros 0 siblings, 1 reply; 24+ messages in thread From: Rudolf Sykora @ 2009-01-28 14:58 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs > Did you try with usb/kb ? > Does it have problems handling your mouse? > > In general, usbstart should do the thing for you. Well, now I am booted to windows, being at home. When I reboot to plan9 I have neither a mouse nor the internet connection. So I can only reply from windows and any attempt and respond means a reboot. I would appreciate any advice in the form: look there (on Linux usu some logs, dmesg...) and see what's there. For the start, I haven't changed my /bin/termrc, and there is a line saying usbstart, for sure. If that line worked, would it mean that both the touchpad and the mouse would work? Thanks Ruda ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 14:58 ` Rudolf Sykora @ 2009-01-28 15:19 ` Francisco J Ballesteros 2009-01-28 15:34 ` Rudolf Sykora 0 siblings, 1 reply; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-28 15:19 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs The mouse if it's USB and you have a kernel with USB. Is that the case? On 1/28/09, Rudolf Sykora <rudolf.sykora@gmail.com> wrote: >> Did you try with usb/kb ? >> Does it have problems handling your mouse? >> >> In general, usbstart should do the thing for you. > > Well, now I am booted to windows, being at home. When I reboot to > plan9 I have neither a mouse nor the internet connection. So I can > only reply from windows and any attempt and respond means a reboot. I > would appreciate any advice in the form: look there (on Linux usu some > logs, dmesg...) and see what's there. > > For the start, I haven't changed my /bin/termrc, and there is a line > saying usbstart, for sure. > If that line worked, would it mean that both the touchpad and the > mouse would work? > > Thanks > Ruda > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 15:19 ` Francisco J Ballesteros @ 2009-01-28 15:34 ` Rudolf Sykora 2009-01-28 16:13 ` Francisco J Ballesteros 0 siblings, 1 reply; 24+ messages in thread From: Rudolf Sykora @ 2009-01-28 15:34 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs 2009/1/28 Francisco J Ballesteros <nemo@lsub.org>: > The mouse if it's USB and you have a kernel with USB. Is that the case? The mouse is a usb one for sure. I believe the kernel is with USB, but how can I say for sure? R ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 15:34 ` Rudolf Sykora @ 2009-01-28 16:13 ` Francisco J Ballesteros 2009-01-28 16:25 ` Akshat Kumar 2009-01-28 16:34 ` Rudolf Sykora 0 siblings, 2 replies; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-28 16:13 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Try to see if you can list #U If you can't that's the problem. You also need kbin. Perhaps looking at /dev/drivers is easier to see if you have both. If you can you might run USB/kb by hand to see if that works. On 1/28/09, Rudolf Sykora <rudolf.sykora@gmail.com> wrote: > 2009/1/28 Francisco J Ballesteros <nemo@lsub.org>: >> The mouse if it's USB and you have a kernel with USB. Is that the case? > > The mouse is a usb one for sure. > I believe the kernel is with USB, but how can I say for sure? > > R > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 16:13 ` Francisco J Ballesteros @ 2009-01-28 16:25 ` Akshat Kumar 2009-01-28 16:28 ` Francisco J Ballesteros 2009-01-28 16:34 ` Rudolf Sykora 1 sibling, 1 reply; 24+ messages in thread From: Akshat Kumar @ 2009-01-28 16:25 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs In relation to this: in Install mode on the Plan 9 ISO, my USB keyboard is usable, but my USB mouse does not function (cause the pointer to move). Is this normal? ak ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 16:25 ` Akshat Kumar @ 2009-01-28 16:28 ` Francisco J Ballesteros 2009-01-28 16:31 ` Akshat Kumar 0 siblings, 1 reply; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-28 16:28 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs can happen. Depends on how you start USB kb On 1/28/09, Akshat Kumar <akumar@mail.nanosouffle.net> wrote: > In relation to this: > in Install mode on the Plan 9 ISO, my > USB keyboard is usable, but my > USB mouse does not function > (cause the pointer to move). > > Is this normal? > > ak > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 16:28 ` Francisco J Ballesteros @ 2009-01-28 16:31 ` Akshat Kumar 0 siblings, 0 replies; 24+ messages in thread From: Akshat Kumar @ 2009-01-28 16:31 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs 2009/1/28 Francisco J Ballesteros <nemo@lsub.org>: > can happen. Depends on how you start USB kb I don't -- that part was automagic. ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 16:13 ` Francisco J Ballesteros 2009-01-28 16:25 ` Akshat Kumar @ 2009-01-28 16:34 ` Rudolf Sykora 2009-01-28 16:51 ` Francisco J Ballesteros 1 sibling, 1 reply; 24+ messages in thread From: Rudolf Sykora @ 2009-01-28 16:34 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs 2009/1/28 Francisco J Ballesteros <nemo@lsub.org>: > Try to see if you can list #U I can list #U, I get many items listed. > If you can't that's the problem. > You also need kbin. Perhaps looking at /dev/drivers is easier to see > if you have both. Looking in the /dev/drivers file I again can see #U. I can't see 'kbin' or anything alike there. Nonetheless, I can see 'kbdin' and 'kbmap' files in the output of 'lc #U'. > > If you can you might run USB/kb by hand to see if that works. Running 'usb/kb' says nothing and returns a prompt. Mouse does not move. R ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 16:34 ` Rudolf Sykora @ 2009-01-28 16:51 ` Francisco J Ballesteros 0 siblings, 0 replies; 24+ messages in thread From: Francisco J Ballesteros @ 2009-01-28 16:51 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Try running it with debug enabled. Also. Sorry. Mouse does not require kbin. On 1/28/09, Rudolf Sykora <rudolf.sykora@gmail.com> wrote: > 2009/1/28 Francisco J Ballesteros <nemo@lsub.org>: >> Try to see if you can list #U > > I can list #U, I get many items listed. > >> If you can't that's the problem. >> You also need kbin. Perhaps looking at /dev/drivers is easier to see >> if you have both. > > Looking in the /dev/drivers file I again can see #U. I can't see > 'kbin' or anything alike there. Nonetheless, I can see 'kbdin' and > 'kbmap' files in the output of 'lc #U'. >> >> If you can you might run USB/kb by hand to see if that works. > > Running 'usb/kb' says nothing and returns a prompt. > Mouse does not move. > > R > > ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 13:48 ` Rudolf Sykora 2009-01-28 13:53 ` Francisco J Ballesteros @ 2009-01-28 15:21 ` Steve Simon 2009-01-28 18:20 ` Dave Eckhardt 1 sibling, 1 reply; 24+ messages in thread From: Steve Simon @ 2009-01-28 15:21 UTC (permalink / raw) To: 9fans you mention the touchpad - I guess this is a ps2 device rather than a usb one (though I may be wrong). You should be able to start that using mouse=ps2 in your plan9.ini. > > --- whatabout sound? Does anybody have Realtek AC97 audio working? > There are two ac97 drivers written independently, I believe there are links on the wiki to them. > --- Video Intel 82852/82855 GM/GME Did you get this to work? If not in native mode then in vesa mode? > --- finally wifi: Intel PRO/Wireless LAN 2100 3B Mini PCI adapter? (I > couldn't find anything about this...) I think this is a centrino device - if so there is an unfinished driver in russ's contrib dir on sources. sorry this is not very much help, but its a start. If you are willing to start working on merging the audio drivers or finishing the centrino one I'am sure there will be people willing to advise and maybe help. -Steve ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 15:21 ` Steve Simon @ 2009-01-28 18:20 ` Dave Eckhardt 2009-02-06 7:26 ` Akshat Kumar 0 siblings, 1 reply; 24+ messages in thread From: Dave Eckhardt @ 2009-01-28 18:20 UTC (permalink / raw) To: 9fans > There are two ac97 drivers written independently, I believe there > are links on the wiki to them. The one written by CMU students has been tested on a bunch of Intel hardware and knows how to work around busted motherboards which don't clock samples at the right rate (apparently this was popular at some point). The other one has better code quality, and will try to run on more chips, but it's not clear how many of them it has been tested on. If somebody has time to do a merge, that would be great. I still have handy one of the machines with busted clocking. Dave Eckhardt ^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials 2009-01-28 18:20 ` Dave Eckhardt @ 2009-02-06 7:26 ` Akshat Kumar 0 siblings, 0 replies; 24+ messages in thread From: Akshat Kumar @ 2009-02-06 7:26 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs 2009/1/28 Dave Eckhardt <davide+p9@cs.cmu.edu>: > The one written by CMU students has been tested on a bunch > of Intel hardware and knows how to work around busted > motherboards which don't clock samples at the right rate > (apparently this was popular at some point). > > The other one has better code quality, and will try to run > on more chips, but it's not clear how many of them it has > been tested on. > > If somebody has time to do a merge, that would be great. > I still have handy one of the machines with busted clocking. > Ah, I might be able to get to this in the following weeks. Let me know if you have any updates. Thanks, ak ^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2009-02-06 7:26 UTC | newest] Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-01-09 14:17 [9fans] pull doesn't work due to unavailable sources; travelmate 291LCi specials Rudolf Sykora 2009-01-09 14:34 ` erik quanstrom 2009-01-09 15:00 ` sqweek 2009-01-09 16:37 ` Gabriel Diaz Lopez de la Llave 2009-01-09 16:51 ` Francisco J Ballesteros 2009-01-09 17:36 ` Gabriel Diaz Lopez de la Llave 2009-01-09 20:42 ` Uriel 2009-01-09 20:54 ` Francisco J Ballesteros 2009-01-09 22:24 ` Nathaniel W Filardo 2009-01-16 9:28 ` Rudolf Sykora 2009-01-28 13:48 ` Rudolf Sykora 2009-01-28 13:53 ` Francisco J Ballesteros 2009-01-28 14:58 ` Rudolf Sykora 2009-01-28 15:19 ` Francisco J Ballesteros 2009-01-28 15:34 ` Rudolf Sykora 2009-01-28 16:13 ` Francisco J Ballesteros 2009-01-28 16:25 ` Akshat Kumar 2009-01-28 16:28 ` Francisco J Ballesteros 2009-01-28 16:31 ` Akshat Kumar 2009-01-28 16:34 ` Rudolf Sykora 2009-01-28 16:51 ` Francisco J Ballesteros 2009-01-28 15:21 ` Steve Simon 2009-01-28 18:20 ` Dave Eckhardt 2009-02-06 7:26 ` Akshat Kumar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).