Re: [9fans] how to build a file server?

Re: [9fans] how to build a file server?

[erik quanstrom]

that's an easy mistake to make, but it's a big confusion.
kfs is not the fileserver kernel.  thus, kfscmd is for kfs
which runs on terminals.  the fileserver's commands are in fsconfig(8).

- erik

On Tue Jan  9 14:02:56 EST 2007, paurea@gmail.com wrote:
> kfscmd is for kfs the old file server. You should be using fossil.
> Take a look at the fossil(4), specifically the command fossil/conf and
> fossilcons(8) man pages.
>
>
> --
> - curiosity sKilled the cat

[9fans] how to build a file server?

[Alberto Cortés]

I have a cpu/auth/fs server configured as the Wiki
("Configuring_a_Standalone_CPU_Server") suggests. I have created
some test user accounts.

I also have an standalone terminal (with its own fossil).

I can cpu from the terminal to the server (as any user).
I can drawterm to the server (as any user).

My problem(s):
I can not boot the terminal with the server as fs and auth:
(boot: can't connect to file server: connection timed out)
Also, I can not 9fs to the server.



Running "snoopy" and "netstat -n" on the server I have discovered
that my server is not a fs server at all. There is nobody
listening at tcp 564.

/rc/bin/service/!tcp564 launch exportfs which I belive is not
authenticated: if I rename /rc/bin/service/!tcp564 to
/rc/bin/service/tcp564 and reboot the server, my problem is
gone, I can 9fs to it and boot the terminal with the server
as fs and auth. But the user is not asked for a password when
booting :(.

Searching 9fans archive I have read that:

    disk/kfscmd 'listen tcp!*!564'

is this solutions to all my problems.

Also on the wiki (Setting_up_fossil) says:

    If you want to serve the network you can run the commands

        listen tcp!*!9fs
        listen il!*!9fs


but there are some things in kfscmd manpage that I don't fully
ubnderstands and prevent me from using the "disk/kfscmd" solution:

    listen [address]

        [...]
        This feature is intended to facilitate small
        networks of a couple machines in the situation when
        convenience is more important than performance. This
        command is only useful on machines with (possibly
        simulated) NVRAM, which needs to be readable to the kfs
        processes; see readnvram in authsrv(2). The production
        file server (see fs(4)) is strongly encouraged for
        anything more than casual use.
        [...]

So, how do I properly build a file server?


--
  http://bach.gast.it.uc3m.es/~alcortes/index.html

Re: [9fans] how to build a file server?

[Gabriel Diaz]

[-- Attachment #1: Type: text/plain, Size: 2465 bytes --]

Hello

the listen command you see should be run from the fossil console i think,
see fossilcons(8)

you can configure fossil using fossil/conf to run the listen command on each
boot

something like:
% fossil/conf /dev/sdC0 > flproto
add listen command to flproto
% cat flproto | fossil/conf -w /dev/sdC0

check the fossil man pages for the correct syntax.

slds.

gabi


On 1/9/07, Alberto Cortés <alcortes@it.uc3m.es> wrote:
>
> I have a cpu/auth/fs server configured as the Wiki
> ("Configuring_a_Standalone_CPU_Server") suggests. I have created
> some test user accounts.
>
> I also have an standalone terminal (with its own fossil).
>
> I can cpu from the terminal to the server (as any user).
> I can drawterm to the server (as any user).
>
> My problem(s):
> I can not boot the terminal with the server as fs and auth:
> (boot: can't connect to file server: connection timed out)
> Also, I can not 9fs to the server.
>
>
>
> Running "snoopy" and "netstat -n" on the server I have discovered
> that my server is not a fs server at all. There is nobody
> listening at tcp 564.
>
> /rc/bin/service/!tcp564 launch exportfs which I belive is not
> authenticated: if I rename /rc/bin/service/!tcp564 to
> /rc/bin/service/tcp564 and reboot the server, my problem is
> gone, I can 9fs to it and boot the terminal with the server
> as fs and auth. But the user is not asked for a password when
> booting :(.
>
> Searching 9fans archive I have read that:
>
>    disk/kfscmd 'listen tcp!*!564'
>
> is this solutions to all my problems.
>
> Also on the wiki (Setting_up_fossil) says:
>
>    If you want to serve the network you can run the commands
>
>        listen tcp!*!9fs
>        listen il!*!9fs
>
>
> but there are some things in kfscmd manpage that I don't fully
> ubnderstands and prevent me from using the "disk/kfscmd" solution:
>
>    listen [address]
>
>        [...]
>        This feature is intended to facilitate small
>        networks of a couple machines in the situation when
>        convenience is more important than performance. This
>        command is only useful on machines with (possibly
>        simulated) NVRAM, which needs to be readable to the kfs
>        processes; see readnvram in authsrv(2). The production
>        file server (see fs(4)) is strongly encouraged for
>        anything more than casual use.
>        [...]
>
> So, how do I properly build a file server?
>
>
> --
> http://bach.gast.it.uc3m.es/~alcortes/index.html
>

[-- Attachment #2: Type: text/html, Size: 3548 bytes --]

Re: [9fans] how to build a file server?

[Gorka guardiola]

kfscmd is for kfs the old file server. You should be using fossil.
Take a look at the fossil(4), specifically the command fossil/conf and
fossilcons(8) man pages.


--
- curiosity sKilled the cat