From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <889533f6069fc061c09cef200acd8694@plan9.bell-labs.com>
Date: Thu, 21 Sep 2006 14:51:56 -0400
From: jmk@plan9.bell-labs.com
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Re: venti+fossil problems on new install
In-Reply-To: <5706e5d7bd5bf449be6072600e967dc2@quanstro.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Topicbox-Message-UUID: bcce8ca4-ead1-11e9-9d60-3106f5b1d025

On Thu Sep 21 14:28:14 EDT 2006, quanstro@quanstro.net wrote:
> his did is not on sources (/sys/src/9/pc/sdata.c).  you might have a different chipset.
> but without the did in the switch, you have no hope.
> 
> - erik

Not true. Having the DID in the switch only determines whether you
can do DMA or not. The info provided

> atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0

shows the controller is mapped at the legacy ATA addresses so any drives
on it should be found. DMA is icing on the cake.