* [9fans] 9pi image update
@ 2018-04-12 16:32 Richard Miller
2018-04-12 21:05 ` David du Colombier
0 siblings, 1 reply; 9+ messages in thread
From: Richard Miller @ 2018-04-12 16:32 UTC (permalink / raw)
To: 9fans
I've put a new SD card image for Raspberry Pi Plan 9 onto
the bell-labs.com repository, in /n/sources/contrib/miller/9pi.img.gz
I hope that mirrors like 9p.io can be updated soon to make
the new image available.
Apart from 3B+ support (including firmware files for the new
wifi chip), this update should make some improvement on all
Pi models: slightly faster usb and ethernet, corrections for
a few very old Plan 9 bugs flushed out by the Go test suite,
and some extra crypto support for better interoperability
with modern hosts using ssh and hget.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] 9pi image update
@ 2018-05-08 21:16 Richard Miller
2018-05-08 23:00 ` hiro
0 siblings, 1 reply; 9+ messages in thread
From: Richard Miller @ 2018-05-08 21:16 UTC (permalink / raw)
To: 9fans
> cinap's stuff supports wpa2 enterprise
By "cinap's stuff" do you mean the aux/wpa command? If so, then
9pi supports it too because it includes cinap's aux/wpa.
If not, what other stuff is required?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] 9pi image update
2018-05-08 21:16 Richard Miller
@ 2018-05-08 23:00 ` hiro
2018-05-09 0:27 ` Dmitry Panchenko
0 siblings, 1 reply; 9+ messages in thread
From: hiro @ 2018-05-08 23:00 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
yep, it's part of wpa.c
should work out of the box.
it also uses tls, not sure if you have all of that...
On 5/8/18, Richard Miller <9fans@hamnavoe.com> wrote:
>> cinap's stuff supports wpa2 enterprise
>
> By "cinap's stuff" do you mean the aux/wpa command? If so, then
> 9pi supports it too because it includes cinap's aux/wpa.
>
> If not, what other stuff is required?
>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] 9pi image update
2018-05-08 23:00 ` hiro
@ 2018-05-09 0:27 ` Dmitry Panchenko
2018-05-09 10:06 ` Richard Miller
0 siblings, 1 reply; 9+ messages in thread
From: Dmitry Panchenko @ 2018-05-09 0:27 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 781 bytes --]
Richard,
Thank you for the detailed instructions! I've tried that on both networks
WPA2 (Personal and Enterprise). Eventually it does not work in my case.
aux/wpa just hangs. Also I do see kernel prints in the console.
Regards,
Dmytro
On Wed, May 9, 2018 at 2:00 AM, hiro <23hiro@gmail.com> wrote:
> yep, it's part of wpa.c
> should work out of the box.
> it also uses tls, not sure if you have all of that...
>
> On 5/8/18, Richard Miller <9fans@hamnavoe.com> wrote:
> >> cinap's stuff supports wpa2 enterprise
> >
> > By "cinap's stuff" do you mean the aux/wpa command? If so, then
> > 9pi supports it too because it includes cinap's aux/wpa.
> >
> > If not, what other stuff is required?
> >
> >
> >
>
>
--
Regards,
Dmytro Panchenko
[-- Attachment #2: Type: text/html, Size: 1444 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] 9pi image update
2018-05-09 0:27 ` Dmitry Panchenko
@ 2018-05-09 10:06 ` Richard Miller
0 siblings, 0 replies; 9+ messages in thread
From: Richard Miller @ 2018-05-09 10:06 UTC (permalink / raw)
To: 9fans
> aux/wpa just hangs
I suggest temporarily switching off wpa/wep at your access point
to see if you can join the network without crypto. For an open
network, you just need
bind -a '#l1' /net
echo essid MY_ESSID >/net/ether1/clone
ip/ipconfig ether /net/ether1
You can 'cat /net/ether1/ifstats' to see if status is "associated",
and check /net/ipselftab to see if dhcp has assigned an address.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-05-09 10:06 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-12 16:32 [9fans] 9pi image update Richard Miller
2018-04-12 21:05 ` David du Colombier
2018-05-07 10:29 ` Dmitry Panchenko
2018-05-08 13:41 ` Richard Miller
2018-05-08 16:15 ` hiro
2018-05-08 21:16 Richard Miller
2018-05-08 23:00 ` hiro
2018-05-09 0:27 ` Dmitry Panchenko
2018-05-09 10:06 ` Richard Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).