Re: [9fans] auth server with two NICs

[Akshat Kumar <akumar@mail.nanosouffle.net>]

also, I should add that I cannot ping outside of the
local network, on the card attached to the public
network, even if I specify IP. so... there's some
problem in the setup here, it seems.

On Wed, Jul 21, 2010 at 12:58 AM, Akshat Kumar
<akumar@mail.nanosouffle.net> wrote:
> I have an auth server with two cards,
> ether0 and ether1; it's connected to
> an fs server on ether1 and a public
> network on ether0 - it has to get root
> from the fs server:
>
> root is from il -g 192.168.100.1 ether /net/ether1 192.168.100.2 255.255.255.0
>
> in /cfg/$sys/cpurc, I have the following:
>
> ip/ipconfig -g 192.168.2.1 ether /net/ether0 192.168.2.141 255.255.255.0
> ip/ipconfig -g 192.168.100.1 ether /net/ether1 192.168.100.2 255.255.255.0
>
> I get the root fs just fine, and I can ping
> nodes on both networks (fs on the fs net,
> my laptop on the public net) just fine.
>
> now, I have one concern and one problem -
> the concern: only ether0 is bound into /net,
> ether1 doesn't show up in there.
> the problem: dns on the public network
> doesn't work - I get dns failure when trying
> to resolve google.com, for example - I have
> described both networks as separate ipnets
> in /lib/ndb/local, with a specification of dns
> for the public network, but it doesn't seem
> to take effect.
>
> Is there some more proper way of dealing
> with this? Anything I obvious that I might
> be doing wrong?
>
>
> Thanks,
> ak
>