* [9fans] VGA config
@ 2004-10-21 13:08 cej
2004-10-21 13:12 ` Steve Simon
2004-10-21 13:13 ` Russ Cox
0 siblings, 2 replies; 4+ messages in thread
From: cej @ 2004-10-21 13:08 UTC (permalink / raw)
To: 9fans
Hi all,
where is the proper place to put
aux/vga -l 1400x1050x32
to change vga res permanently. BTW, where does the system take
vga res from after boot? Can§t see it termrc....
Thanks, regards,
++pac.
---
Odchozí zpráva neobsahuje viry.
Zkontrolováno antivirovým systémem AVG (http://www.grisoft.cz).
Verze: 6.0.779 / Virová báze: 526 - datum vydání: 19. 10. 2004
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] VGA config
2004-10-21 13:08 [9fans] VGA config cej
@ 2004-10-21 13:12 ` Steve Simon
2004-10-21 13:13 ` Russ Cox
1 sibling, 0 replies; 4+ messages in thread
From: Steve Simon @ 2004-10-21 13:12 UTC (permalink / raw)
To: 9fans
vga size comes from plan9.ini in your 9fat partition.
see man plan9.ini
-Steve
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] VGA config
2004-10-21 13:08 [9fans] VGA config cej
2004-10-21 13:12 ` Steve Simon
@ 2004-10-21 13:13 ` Russ Cox
1 sibling, 0 replies; 4+ messages in thread
From: Russ Cox @ 2004-10-21 13:13 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> where is the proper place to put
> aux/vga -l 1400x1050x32
plan9.ini
vgasize=1400x1050x32
^ permalink raw reply [flat|nested] 4+ messages in thread
* [9fans] vga config
@ 2001-07-06 10:20 Martin Gasthuber
0 siblings, 0 replies; 4+ messages in thread
From: Martin Gasthuber @ 2001-07-06 10:20 UTC (permalink / raw)
To: 9fans
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: multipart/mixed;, Size: 8953 bytes --]
This is a multi-part message in MIME format.
--------------C70190B391A1C90087AF2ABE
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi,
again a boring newbe question regarding the vga configuration on a newer
laptop (Fujitsu E Series). It has a 'ATI Rage Mobility AGP 2x' controller with
8 meg of memory. I used the latest (end of June) from VitaNouva, and with the
initial setup i actually got something on the screen (lcd - 1024x768x24) but
the windows are horizonzontally splitted - i guess the screen timing was not
ok. In addition i would like to use the laptop on a dock with an external CRT
and a screen config like 1280x1024x24 @ 85Hz (which all runs fine under
Linux). Did anybody has already a vgadb for a similar setup or a hint to use
the parameters used/found by the XFree4 driver in order to create a new vgadb
entry ??
thanx
Martin
ps: attached are vgainfo.txt and plan9.ini used/created
--
Martin Gasthuber -- DESY/Hamburg -- Head of Systems & Networks in IT
snail Notkestrasse 85 22607 Hamburg/Germany
e-mail Martin.Gasthuber@desy.de - fon/fax +49 40 [8998/8994] 2564
--------------C70190B391A1C90087AF2ABE
Content-Type: text/plain; charset=us-ascii;
name="vgainfo.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="vgainfo.txt"
main->snarf
vga->snarf
mach64xx->snarf
vga->dump
vga misc E7
vga feature 00
vga sequencer 03 00 03 00 02
vga crt 73 4F 4F 97 55 86 B4 1F - 00 4F 0D 0E 00 00 06 90
91 87 8F 28 1F 8F B5 A3 - FF
vga graphics 00 00 00 00 00 10 0E 00 - FF
vga attribute 00 01 02 03 04 05 14 07 - 38 39 3A 3B 3C 3D 3E 3F
0C 00 0F 08 00
vga vm a b 16777216 0
vga vmz 8388608
vga apz 8388608
vga linear 1
vga->attr: 0xC00F6=MACH64LMPC
mach64xx->dump
mach64xx pci 41988 io 2000 pciregs
mach64xx ccru 300
mach64xx HTotalDisp 004F0073
mach64xx HSyncStrtWid 00260055
mach64xx VTotalDisp 018F01B4
mach64xx VSyncStrtWid 00270191
mach64xx VlineCrntVline 00A303FF
mach64xx OffPitch 0A000000
mach64xx IntCntl 80000024
mach64xx CrtcGenCntl 02402200
mach64xx OvrClr 00000000
mach64xx OvrWidLR 00000000
mach64xx OvrWidTB 00000000
mach64xx CurClr0 FFFFFFFF
mach64xx CurClr1 00000000
mach64xx CurOffset 00009602
mach64xx CurHVposn 000000C6
mach64xx CurHVoff 00310030
mach64xx ScratchReg0 04100400
mach64xx ScratchReg1 00000000
mach64xx ClockCntl 00AC0003
mach64xx BusCntl 7333A001
mach64xx MemCntl 10C57A3B
mach64xx ExtMemCntl E0000C81
mach64xx MemVgaWpSel 00010000
mach64xx MemVgaRpSel 00010000
mach64xx DacRegs 00FF0040
mach64xx DacCntl 8601200A
mach64xx GenTestCntl 00000000
mach64xx ConfigCntl 00003D42
mach64xx ConfigChipId 64004C4D
mach64xx ConfigStat0 00C00094
mach64xx ConfigStat1 00000000
mach64xx ConfigStat2 00000000
mach64xx DspConfig 00570628
mach64xx DspOnOff 049E05F8
mach64xx DpBkgdClr FFFFFFFF
mach64xx DpChainMsk FFFFFFFF
mach64xx DpFrgdClr FFFFFFFF
mach64xx DpMix FFFFFFFF
mach64xx DpPixWidth FFFFFFFF
mach64xx DpSrc FFFFFFFF
mach64xx DpWriteMsk FFFFFFFF
mach64xx LcdIndex 00000407
mach64xx LcdData 00006002
mach64xx PLL AC AC 40 4C 87 03 C0 D4 - D4 D4 00 F9 80 1B 00 00
0E CF 40 00 50 F6 AC 03 - 40 00 24 FD 00 00 00 02
mach64xx LCD ConfigPanel 00030274
mach64xx LCD GenCntl 407D24DE
mach64xx LCD DstnCntl 00000000
mach64xx LCD HfbPitchAddr 00000F00
mach64xx LCD HorzStretch E7F00A00
mach64xx LCD VertStretch 80000000
mach64xx LCD ExtVertStretch 0057FF00
mach64xx LCD LtGio 00006002
mach64xx LCD PowerMngmnt 0200040B
mach64xx LCD ZvgPio 01000000
mach64xx VCLK0 31619314
mach64xx VCLK1 31619314
mach64xx VCLK2 31619314
mach64xx VCLK3 0
rom table offset 10C
freq table offset A2A
memclk 125000000
ref_freq 29500000
ref_divider 64
min_freq 9840000
max_freq 236000000
pd 0 value 4 (|4)
post = 3
mach64xx pixel clock = 130290000
ATI BIOS rom 0x10c freq 0x0 clock 0xa2a
clocks: 43605 60284 3707 86 0 0 0 0 0 0 0 0 376 0 0 16969
programmable clock: 4
clock to program: 3
reference numerator: 29500
reference denominator: 1
internal clock
reference divider in plls
can't find lcd bios table0
vmf 25175000 vmdf 0 vf1 0 vbw 0
vga->init
mach64xx->init
rom table offset 10C
freq table offset A2A
memclk 12500
memclk 12500... x 63.555114...t 63... xprec 6...fifosz 2033.763654...fprec 11...prec 6...afifosz 32...fifooff 1971.000000...pfc 7...rcc 9...fifoon 97.000000...
dbdumpmode
type=vga, size=640x480x8
frequency=25175000
x=640 (0x280), y=480 (0x1E0), z=8 (0x8)
ht=800 (0x320), shb=664 (0x298), ehb=760 (0x2F8)
shs=664 (0x298), ehs=760 (0x2F8)
vt=525 (0x20D), vrs=491 (0x1EB), vre=493 (0x1ED)
hsync=0, vsync=0, interlace=0
vga->dump
vga flag Fdump|Finit|Fsnarf
vga misc E3
vga feature 00
vga sequencer 03 01 0F 00 0A
vga crt 5F 4F 52 9F 53 1F20B 3E - 00 40 00 00 00 00 00 00
1EB 2D1DF 50 601EB1EC A3 -7FF
vga graphics 00 00 00 00 00 50 05 0F - FF
vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D 0E 0F
41 FF 0F 00 00
vga vm a b 16777216 0
vga vmz 8388608
vga apz 8388608
vga linear 1
vga->attr: 0xC00F6=MACH64LMPC
mach64xx->dump
mach64xx flag Ulinear|Uenhanced|Fdump|Finit|Fsnarf
mach64xx pci 41988 io 2000 pciregs
mach64xx ccru 300
mach64xx HTotalDisp 004F0063
mach64xx HSyncStrtWid 000C0052
mach64xx VTotalDisp 01DF020C
mach64xx VSyncStrtWid 000201EA
mach64xx VlineCrntVline 00A303FF
mach64xx OffPitch 14000000
mach64xx IntCntl 00000000
mach64xx CrtcGenCntl 03002200
mach64xx OvrClr 00000000
mach64xx OvrWidLR 00000000
mach64xx OvrWidTB 00000000
mach64xx CurClr0 FFFFFFFF
mach64xx CurClr1 00000000
mach64xx CurOffset 00009602
mach64xx CurHVposn 000000C6
mach64xx CurHVoff 00310030
mach64xx ScratchReg0 04100400
mach64xx ScratchReg1 00000000
mach64xx ClockCntl 00000002
mach64xx BusCntl 7333A001
mach64xx MemCntl 10C57A3B
mach64xx ExtMemCntl E0000C81
mach64xx MemVgaWpSel 00010000
mach64xx MemVgaRpSel 00010000
mach64xx DacRegs 00FF0040
mach64xx DacCntl 8601200A
mach64xx GenTestCntl 00000000
mach64xx ConfigCntl 00000000
mach64xx ConfigChipId 64004C4D
mach64xx ConfigStat0 00C00094
mach64xx ConfigStat1 00000000
mach64xx ConfigStat2 00000000
mach64xx DspConfig 006A07F1
mach64xx DspOnOff 006107B3
mach64xx DpBkgdClr FFFFFFFF
mach64xx DpChainMsk FFFFFFFF
mach64xx DpFrgdClr FFFFFFFF
mach64xx DpMix FFFFFFFF
mach64xx DpPixWidth 00020202
mach64xx DpSrc FFFFFFFF
mach64xx DpWriteMsk FFFFFFFF
mach64xx LcdIndex 00000407
mach64xx LcdData 00006002
mach64xx PLL AC AC 40 4C 87 03 F0 D4 - D4 00 00 F9 80 1B 00 00
0E CF 40 00 50 F6 AC 03 - 40 00 24 FD 00 00 00 02
mach64xx LCD ConfigPanel 00034274
mach64xx LCD GenCntl 407D20DA
mach64xx LCD DstnCntl 00000000
mach64xx LCD HfbPitchAddr 00000F00
mach64xx LCD HorzStretch E7F00A00
mach64xx LCD VertStretch C0000280
mach64xx LCD ExtVertStretch 0017FB00
mach64xx LCD LtGio 00006002
mach64xx LCD PowerMngmnt 0200040B
mach64xx LCD ZvgPio 01000000
mach64xx VCLK0 31619314
mach64xx VCLK1 31619314
mach64xx VCLK2 0
mach64xx VCLK3 0
rom table offset 10C
freq table offset A2A
memclk 125000000
ref_freq 29500000
ref_divider 64
min_freq 9840000
max_freq 236000000
pd 0 value 4 (|4)
post = 3
mach64xx pixel clock = 130290000
main->exits
--------------C70190B391A1C90087AF2ABE
Content-Type: text/plain; charset=us-ascii;
name="plan9.ini"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="plan9.ini"
*nomp=1
distname=plan9
partition=new
bootargs=local!/bzroot
monitor=multisync65
vgasize=1024x768x24
mouseport=ps2
bootfile=fd0!dos!9pcflop.gz
--------------C70190B391A1C90087AF2ABE--
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-10-21 13:13 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-10-21 13:08 [9fans] VGA config cej
2004-10-21 13:12 ` Steve Simon
2004-10-21 13:13 ` Russ Cox
-- strict thread matches above, loose matches on Subject: below --
2001-07-06 10:20 [9fans] vga config Martin Gasthuber
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).