From: Burton Samograd <burton.samograd@gmail.com>
To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net>
Subject: Re: [9fans] 'no fat' - boot failure
Date: Sun, 13 May 2012 21:01:06 -0600 [thread overview]
Message-ID: <CAM8pOuPUrCogvgDOzi_B0XxrT8RZDQZ7fOB0HhCwtXhFLaSA1g@mail.gmail.com> (raw)
In-Reply-To: <dd6c7e1fdef58a4233fb00e512440f3b@kw.quanstro.net>
[-- Attachment #1: Type: text/plain, Size: 911 bytes --]
Attached is the output of lspci. I'll see if I can get it to fully
boot to get the output of the other command.
--
Burton
On Sun, May 13, 2012 at 8:56 PM, erik quanstrom <quanstro@quanstro.net> wrote:
> On Sun May 13 21:20:40 EDT 2012, burton.samograd@gmail.com wrote:
>> Toggling the bootable flag on the plan9 partition did allow it to start booting.
>> It then looked to be iterating over the drives, where on my harddisks I got:
>>
>> sdE0 <disk name/id>
>> bad disk
>> bad disk
>> bad disk
>> bad disk
>> bad disk
>
> i'm not sure of the lineage of the 9front driver, or what hardware you're using.
> this sort of sounds like a hardware funny (which may be already fixed) or
> puis (power-up in standby). the output of the "pci" command, or lspci
> on linux would be helpful. if you could also get the output of "cat /dev/sdE5/ctl"
> that would be good as well.
>
> - erik
>
[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 2280 bytes --]
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IH (ICH9DH) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface (rev b1)
next prev parent reply other threads:[~2012-05-14 3:01 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-13 21:07 Burton Samograd
2012-05-13 21:48 ` cinap_lenrek
2012-05-14 0:22 ` Burton Samograd
2012-05-14 1:19 ` Burton Samograd
[not found] ` <CAM8pOuMYGKSuSMUheyWqMXaf6pKwwkb+2bb5OkfGZSK2XcEVmQ@mail.gmail.c>
2012-05-14 2:56 ` erik quanstrom
2012-05-14 3:01 ` Burton Samograd [this message]
[not found] ` <CAM8pOuPUrCogvgDOzi_B0XxrT8RZDQZ7fOB0HhCwtXhFLaSA1g@mail.gmail.c>
2012-05-14 3:10 ` erik quanstrom
2012-05-14 22:12 ` cinap_lenrek
2012-05-15 0:57 ` Burton Samograd
2012-05-15 2:05 ` sl
2012-05-15 2:28 ` erik quanstrom
2012-05-15 2:48 ` sl
2012-05-15 9:19 ` erik quanstrom
2012-05-15 2:36 ` Burton Samograd
2012-05-15 2:39 ` Burton Samograd
2012-05-15 2:57 ` sl
2012-05-15 9:11 ` erik quanstrom
2012-05-15 15:04 ` cinap_lenrek
2012-05-15 15:26 ` erik quanstrom
2012-05-15 17:11 ` cinap_lenrek
2012-05-15 19:51 ` cinap_lenrek
2012-05-15 20:29 ` Burton Samograd
2012-05-15 20:33 ` cinap_lenrek
2012-05-15 23:49 ` cinap_lenrek
2012-05-16 0:05 ` sl
[not found] ` <CAM8pOuOtwTFjJDPYo_K3L580Zv-W24_XU-ZiBjP-6p9SFkHNkA@mail.gmail.c>
2012-05-15 9:20 ` erik quanstrom
[not found] ` <CAM8pOuMnp3xPw58g-7a7O_3HhOqf9=Z=DP-XfaGXQJdWyzrVFw@mail.gmail.c>
2012-05-15 9:31 ` erik quanstrom
2012-05-15 12:19 ` Burton Samograd
2012-05-15 12:40 ` Burton Samograd
[not found] ` <CAM8pOuOdLnTgqj1BOKhZe550Cc=QvfncgqgixcCAifKQSytFJA@mail.gmail.c>
2012-05-15 13:39 ` erik quanstrom
[not found] ` <CAM8pOuMbwVj0_s+SFMdT7qHe5oAg6Yux4shm189-Pd3-Gp2+mQ@mail.gmail.c>
2012-05-15 13:28 ` erik quanstrom
2012-05-15 14:12 ` Burton Samograd
[not found] ` <D2A5C7470D67A54FACE86B838946D49D14E466F74E@NJ4MSGSCR02.markit.pa>
2012-05-15 15:02 ` erik quanstrom
2012-05-15 2:26 ` erik quanstrom
2012-05-14 3:56 ` Ethan Grammatikidis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAM8pOuPUrCogvgDOzi_B0XxrT8RZDQZ7fOB0HhCwtXhFLaSA1g@mail.gmail.com \
--to=burton.samograd@gmail.com \
--cc=9fans@9fans.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).