From mboxrd@z Thu Jan  1 00:00:00 1970
MIME-Version: 1.0
Date: Mon, 24 Oct 2011 10:09:13 +0200
Message-ID: <CAOEdRO0NdtxhrXAFVH_oocyhKgERxbVpy5_H1-ZkaoK0ws+Y5w@mail.gmail.com>
From: Rudolf Sykora <rudolf.sykora@gmail.com>
To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net>
Content-Type: text/plain; charset=UTF-8
Subject: [9fans] how to connect an usb drive
Topicbox-Message-UUID: 39885a54-ead7-11e9-9d60-3106f5b1d025

Hello,

please, I have an external harddrive which I use in linux and there,
in dmesg, I see this

usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: New USB device found, idVendor=04fc, idProduct=0c15
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-6: Product: USB to Serial-ATA bridge
usb 1-6: Manufacturer: Sunplus Technology Inc.
usb 1-6: SerialNumber: WDC WD1600     WD-WXE507362861
usb 1-6: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
hub 3-0:1.0: over-current change on port 1
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access     WDC WD16 00BEVS-00RST0         PQ: 0 ANSI: 2
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 38 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete

Should I be able to read this drive from plan9?
I had a few attempts which were unsuccessful. Can you write a few
commands which should do?

Thanks
Ruda