* [9fans] Wifi Firmware "does not exist", but it does.
@ 2023-03-20 15:21 zxcdewqa8
2023-03-20 15:31 ` Jacob Moody
0 siblings, 1 reply; 29+ messages in thread
From: zxcdewqa8 @ 2023-03-20 15:21 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 511 bytes --]
Hi, Plan9 newbie here.
I downloaded the iwm firmware from OpenBSD and put it in /lib/firmware.
The /dev/kmesg shows...
#l1: '/lib/firmware/iwm-7260-17' does not exist
But it does. What am I doing wrong?
Thanks!
P.s. I am running 9front on a Thinkpad (T440P).
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M0ac0722ecbd17359b228dc16
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 1188 bytes --]
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-20 15:21 [9fans] Wifi Firmware "does not exist", but it does zxcdewqa8
@ 2023-03-20 15:31 ` Jacob Moody
2023-03-21 6:08 ` zxcdewqa8
0 siblings, 1 reply; 29+ messages in thread
From: Jacob Moody @ 2023-03-20 15:31 UTC (permalink / raw)
To: 9fans
On 3/20/23 09:21, zxcdewqa8@gmail.com wrote:
> Hi, Plan9 newbie here.
>
> I downloaded the iwm firmware from OpenBSD and put it in /lib/firmware.
> The /dev/kmesg shows...
> #l1: '/lib/firmware/iwm-7260-17' does not exist
>
> But it does. What am I doing wrong?
>
> Thanks!
After placing the file there, you need to rebuild and reinstall the kernel.
This puts the firmware in the paqfs, allowing the kernel to see it before
a root filesystem is mounted.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M5883b3788e15004f85e880ee
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-20 15:31 ` Jacob Moody
@ 2023-03-21 6:08 ` zxcdewqa8
2023-03-21 6:17 ` Jacob Moody
0 siblings, 1 reply; 29+ messages in thread
From: zxcdewqa8 @ 2023-03-21 6:08 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 558 bytes --]
Ok...I recompiled the kernel...and I am getting this message...
> #l1: firmware: iwm-7260-17, rev 11, build 3216344376, size [3] 14000+2c000 + [3] 14000+2c000 + 0
> iwl: no calibration results
I then try the following...but get no result.
> term% bind -a '#l1' /net
> term% aux/wpa -2 -s MYHOMEWIFI -p /net/ether1
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M61035c6c2d99155a293d757d
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 1258 bytes --]
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-21 6:08 ` zxcdewqa8
@ 2023-03-21 6:17 ` Jacob Moody
2023-03-21 8:38 ` zxcdewqa8
2023-03-21 11:24 ` Yury Chumak
0 siblings, 2 replies; 29+ messages in thread
From: Jacob Moody @ 2023-03-21 6:17 UTC (permalink / raw)
To: 9fans
On 3/21/23 00:08, zxcdewqa8@gmail.com wrote:
> Ok...I recompiled the kernel...and I am getting this message...
>
>> #l1: firmware: iwm-7260-17, rev 11, build 3216344376, size [3] 14000+2c000 + [3] 14000+2c000 + 0
>> iwl: no calibration results
>
> I then try the following...but get no result.
>> term% bind -a '#l1' /net
>> term% aux/wpa -2 -s MYHOMEWIFI -p /net/ether1
Just one more step.
% ip/ipconfig ether /net/ether1
will do dhcp on the interface.
aux/wpa only associates with the access point.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-Ma33907f15ed59eb26bf8972b
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-21 6:17 ` Jacob Moody
@ 2023-03-21 8:38 ` zxcdewqa8
2023-03-21 8:42 ` mkf9
2023-03-21 11:24 ` Yury Chumak
1 sibling, 1 reply; 29+ messages in thread
From: zxcdewqa8 @ 2023-03-21 8:38 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 428 bytes --]
ok...that's great. Wifi is working now. Thanks!
If I mistype my wifi password, it didn't let me try again. I had to reboot if I mistype my wifi password--because I don't know how to to reset.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-Mcdb969262b13fae48a55ee3f
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 976 bytes --]
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-21 6:17 ` Jacob Moody
2023-03-21 8:38 ` zxcdewqa8
@ 2023-03-21 11:24 ` Yury Chumak
2023-03-21 14:13 ` Jacob Moody
1 sibling, 1 reply; 29+ messages in thread
From: Yury Chumak @ 2023-03-21 11:24 UTC (permalink / raw)
To: 9fans
Same situation with the same wifi-card.
% pci -v
...
3.0.0: net 02.80.00 8086/08b1 4 0:a3100004 8192
Intel Corporation Wireless 7260
Firmware added and kernel rebuilded. Command:
% aux/wpa -p2 -s vega3 /net/ether1
asking password, returns '!' and exits. But next command ip/ipconfig returns:
ipconfig: no success with DHCP
DHCP is ok. It works good with other devices. DHCP-logs on server side
have not requests with wifi-card mac-address.
Trying to connect to mobile phone configured as hotspot takes the same
result - no success with DHCP.
Manual configuring:
% ip/ipconfig -g 192.168.7.1 ether /net/ether1 192.168.7.23 255.255.255.0
also not solve the situaton - ip/ping says about lost packets..
% cat /net/ether1/ifstats
essid: vega3
bssid: 045ea4e8e2ac
status: unassociated
channel: 06
brsne: .....
.....
..big list of available wifi-networks
Tried also configure hotspot as open network, without authorization -
same result, doesn't connect.
What could be the problem??
вт, 21 мар. 2023 г. в 08:17, Jacob Moody <moody@posixcafe.org>:
>
> On 3/21/23 00:08, zxcdewqa8@gmail.com wrote:
> > Ok...I recompiled the kernel...and I am getting this message...
> >
> >> #l1: firmware: iwm-7260-17, rev 11, build 3216344376, size [3] 14000+2c000 + [3] 14000+2c000 + 0
> >> iwl: no calibration results
> >
> > I then try the following...but get no result.
> >> term% bind -a '#l1' /net
> >> term% aux/wpa -2 -s MYHOMEWIFI -p /net/ether1
>
> Just one more step.
>
> % ip/ipconfig ether /net/ether1
>
> will do dhcp on the interface.
> aux/wpa only associates with the access point.
>
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M2da80fda217d1ef128cc3cdf
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-21 11:24 ` Yury Chumak
@ 2023-03-21 14:13 ` Jacob Moody
2023-03-22 10:02 ` Yury Chumak
0 siblings, 1 reply; 29+ messages in thread
From: Jacob Moody @ 2023-03-21 14:13 UTC (permalink / raw)
To: 9fans
On 3/21/23 05:24, Yury Chumak wrote:
> Same situation with the same wifi-card.
> % pci -v
I don't believe the situation is the same.
You are unable to associate with the access point,
which was not the same issue as our other friend here.
> ...
> 3.0.0: net 02.80.00 8086/08b1 4 0:a3100004 8192
> Intel Corporation Wireless 7260
>
> Firmware added and kernel rebuilded. Command:
> % aux/wpa -p2 -s vega3 /net/ether1
>
> asking password, returns '!' and exits. But next command ip/ipconfig returns:
>
> ipconfig: no success with DHCP
>
> DHCP is ok. It works good with other devices. DHCP-logs on server side
> have not requests with wifi-card mac-address.
> Trying to connect to mobile phone configured as hotspot takes the same
> result - no success with DHCP.
> Manual configuring:
> % ip/ipconfig -g 192.168.7.1 ether /net/ether1 192.168.7.23 255.255.255.0
>
> also not solve the situaton - ip/ping says about lost packets..
> % cat /net/ether1/ifstats
> essid: vega3
> bssid: 045ea4e8e2ac
> status: unassociated
> channel: 06
> brsne: .....
> .....
> ..big list of available wifi-networks
>
> Tried also configure hotspot as open network, without authorization -
> same result, doesn't connect.
>
> What could be the problem??
>
The issue is stated in the ifstats output:
> status: unassociated
This is the failure mode I would expect if your wpa password was incorrect.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M927cd981bb1b69915cc58f34
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-21 14:13 ` Jacob Moody
@ 2023-03-22 10:02 ` Yury Chumak
2023-03-22 10:17 ` Skip Tavakkolian
0 siblings, 1 reply; 29+ messages in thread
From: Yury Chumak @ 2023-03-22 10:02 UTC (permalink / raw)
To: 9fans
Thank you for last response..
..Finally issue was resolved through a comprehensive mutual
configuration of various local network services =)) Main thing that it
was not a hardware issue or incompability with 9front..
There is some more questions..
1. How to down network interface correctly?? In order to switch from
one essid to another without reboot..
2. Also found that factotum doesn't save added keys and they are lost
after reboot. What is not configured?? How to decide and which way to
look??
вт, 21 мар. 2023 г. в 16:13, Jacob Moody <moody@posixcafe.org>:
>
> On 3/21/23 05:24, Yury Chumak wrote:
> > Same situation with the same wifi-card.
> > % pci -v
>
> I don't believe the situation is the same.
> You are unable to associate with the access point,
> which was not the same issue as our other friend here.
>
> > ...
> > 3.0.0: net 02.80.00 8086/08b1 4 0:a3100004 8192
> > Intel Corporation Wireless 7260
> >
> > Firmware added and kernel rebuilded. Command:
> > % aux/wpa -p2 -s vega3 /net/ether1
> >
> > asking password, returns '!' and exits. But next command ip/ipconfig returns:
> >
> > ipconfig: no success with DHCP
> >
> > DHCP is ok. It works good with other devices. DHCP-logs on server side
> > have not requests with wifi-card mac-address.
> > Trying to connect to mobile phone configured as hotspot takes the same
> > result - no success with DHCP.
> > Manual configuring:
> > % ip/ipconfig -g 192.168.7.1 ether /net/ether1 192.168.7.23 255.255.255.0
> >
> > also not solve the situaton - ip/ping says about lost packets..
> > % cat /net/ether1/ifstats
> > essid: vega3
> > bssid: 045ea4e8e2ac
> > status: unassociated
> > channel: 06
> > brsne: .....
> > .....
> > ..big list of available wifi-networks
> >
> > Tried also configure hotspot as open network, without authorization -
> > same result, doesn't connect.
> >
> > What could be the problem??
> >
>
>
> The issue is stated in the ifstats output:
> > status: unassociated
>
> This is the failure mode I would expect if your wpa password was incorrect.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M5384fecb7e3e6c9c64b7eebb
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-22 10:02 ` Yury Chumak
@ 2023-03-22 10:17 ` Skip Tavakkolian
2023-03-22 12:40 ` Yury Chumak
0 siblings, 1 reply; 29+ messages in thread
From: Skip Tavakkolian @ 2023-03-22 10:17 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 2628 bytes --]
Regarding questions #2, see secstore(1)
http://p9f.org/magic/man2html/1/secstore
On Wed, Mar 22, 2023, 3:04 AM Yury Chumak <sfynkx@gmail.com> wrote:
> Thank you for last response..
> ..Finally issue was resolved through a comprehensive mutual
> configuration of various local network services =)) Main thing that it
> was not a hardware issue or incompability with 9front..
>
> There is some more questions..
> 1. How to down network interface correctly?? In order to switch from
> one essid to another without reboot..
> 2. Also found that factotum doesn't save added keys and they are lost
> after reboot. What is not configured?? How to decide and which way to
> look??
>
> вт, 21 мар. 2023 г. в 16:13, Jacob Moody <moody@posixcafe.org>:
> >
> > On 3/21/23 05:24, Yury Chumak wrote:
> > > Same situation with the same wifi-card.
> > > % pci -v
> >
> > I don't believe the situation is the same.
> > You are unable to associate with the access point,
> > which was not the same issue as our other friend here.
> >
> > > ...
> > > 3.0.0: net 02.80.00 8086/08b1 4 0:a3100004 8192
> > > Intel Corporation Wireless 7260
> > >
> > > Firmware added and kernel rebuilded. Command:
> > > % aux/wpa -p2 -s vega3 /net/ether1
> > >
> > > asking password, returns '!' and exits. But next command ip/ipconfig
> returns:
> > >
> > > ipconfig: no success with DHCP
> > >
> > > DHCP is ok. It works good with other devices. DHCP-logs on server side
> > > have not requests with wifi-card mac-address.
> > > Trying to connect to mobile phone configured as hotspot takes the same
> > > result - no success with DHCP.
> > > Manual configuring:
> > > % ip/ipconfig -g 192.168.7.1 ether /net/ether1 192.168.7.23
> 255.255.255.0
> > >
> > > also not solve the situaton - ip/ping says about lost packets..
> > > % cat /net/ether1/ifstats
> > > essid: vega3
> > > bssid: 045ea4e8e2ac
> > > status: unassociated
> > > channel: 06
> > > brsne: .....
> > > .....
> > > ..big list of available wifi-networks
> > >
> > > Tried also configure hotspot as open network, without authorization -
> > > same result, doesn't connect.
> > >
> > > What could be the problem??
> > >
> >
> >
> > The issue is stated in the ifstats output:
> > > status: unassociated
> >
> > This is the failure mode I would expect if your wpa password was
> incorrect.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-Mde1ff56938d30b38caa14d27
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 4578 bytes --]
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [9fans] Wifi Firmware "does not exist", but it does.
2023-03-22 10:17 ` Skip Tavakkolian
@ 2023-03-22 12:40 ` Yury Chumak
2023-03-22 17:14 ` Ravi Raj
0 siblings, 1 reply; 29+ messages in thread
From: Yury Chumak @ 2023-03-22 12:40 UTC (permalink / raw)
To: 9fans
Thanks for the advice - will dig into it =))
ср, 22 мар. 2023 г. в 12:18, Skip Tavakkolian <skip.tavakkolian@gmail.com>:
>
> Regarding questions #2, see secstore(1)
>
> http://p9f.org/magic/man2html/1/secstore
>
> On Wed, Mar 22, 2023, 3:04 AM Yury Chumak <sfynkx@gmail.com> wrote:
>>
>> Thank you for last response..
>> ..Finally issue was resolved through a comprehensive mutual
>> configuration of various local network services =)) Main thing that it
>> was not a hardware issue or incompability with 9front..
>>
>> There is some more questions..
>> 1. How to down network interface correctly?? In order to switch from
>> one essid to another without reboot..
>> 2. Also found that factotum doesn't save added keys and they are lost
>> after reboot. What is not configured?? How to decide and which way to
>> look??
>>
>> вт, 21 мар. 2023 г. в 16:13, Jacob Moody <moody@posixcafe.org>:
>> >
>> > On 3/21/23 05:24, Yury Chumak wrote:
>> > > Same situation with the same wifi-card.
>> > > % pci -v
>> >
>> > I don't believe the situation is the same.
>> > You are unable to associate with the access point,
>> > which was not the same issue as our other friend here.
>> >
>> > > ...
>> > > 3.0.0: net 02.80.00 8086/08b1 4 0:a3100004 8192
>> > > Intel Corporation Wireless 7260
>> > >
>> > > Firmware added and kernel rebuilded. Command:
>> > > % aux/wpa -p2 -s vega3 /net/ether1
>> > >
>> > > asking password, returns '!' and exits. But next command ip/ipconfig returns:
>> > >
>> > > ipconfig: no success with DHCP
>> > >
>> > > DHCP is ok. It works good with other devices. DHCP-logs on server side
>> > > have not requests with wifi-card mac-address.
>> > > Trying to connect to mobile phone configured as hotspot takes the same
>> > > result - no success with DHCP.
>> > > Manual configuring:
>> > > % ip/ipconfig -g 192.168.7.1 ether /net/ether1 192.168.7.23 255.255.255.0
>> > >
>> > > also not solve the situaton - ip/ping says about lost packets..
>> > > % cat /net/ether1/ifstats
>> > > essid: vega3
>> > > bssid: 045ea4e8e2ac
>> > > status: unassociated
>> > > channel: 06
>> > > brsne: .....
>> > > .....
>> > > ..big list of available wifi-networks
>> > >
>> > > Tried also configure hotspot as open network, without authorization -
>> > > same result, doesn't connect.
>> > >
>> > > What could be the problem??
>> > >
>> >
>> >
>> > The issue is stated in the ifstats output:
>> > > status: unassociated
>> >
>> > This is the failure mode I would expect if your wpa password was incorrect.
>
> 9fans / 9fans / see discussions + participants + delivery options Permalink
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/T9b33abcfc0b8784b-M2744cdeaef2b0f21803e5c2a
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 29+ messages in thread
end of thread, other threads:[~2023-05-03 15:04 UTC | newest]
Thread overview: 29+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-20 15:21 [9fans] Wifi Firmware "does not exist", but it does zxcdewqa8
2023-03-20 15:31 ` Jacob Moody
2023-03-21 6:08 ` zxcdewqa8
2023-03-21 6:17 ` Jacob Moody
2023-03-21 8:38 ` zxcdewqa8
2023-03-21 8:42 ` mkf9
2023-03-21 11:24 ` Yury Chumak
2023-03-21 14:13 ` Jacob Moody
2023-03-22 10:02 ` Yury Chumak
2023-03-22 10:17 ` Skip Tavakkolian
2023-03-22 12:40 ` Yury Chumak
2023-03-22 17:14 ` Ravi Raj
2023-03-22 19:37 ` Jacob Moody
2023-03-23 16:15 ` Ravi Raj
2023-03-23 17:46 ` Jacob Moody
2023-03-24 14:01 ` Ravi Raj
2023-03-24 14:10 ` Jacob Moody
2023-03-24 14:25 ` hiro
2023-04-03 16:56 ` Ravi Raj
2023-04-03 17:05 ` Jacob Moody
2023-04-05 17:06 ` Ravi Raj
2023-04-05 20:04 ` Yury Chumak
2023-04-08 16:15 ` Ravi Raj
2023-04-09 6:00 ` Yury Chumak
2023-04-09 14:45 ` ori
2023-04-10 14:07 ` Ravi Raj
2023-04-10 14:39 ` Jacob Moody
2023-04-16 15:18 ` Ravi Raj
2023-05-03 15:03 ` Ravi Raj
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).