* plan9port on osx @ 2019-11-08 12:42 Steve Simon 2019-11-08 14:19 ` [9fans] " Mat Kovach ` (3 more replies) 0 siblings, 4 replies; 14+ messages in thread From: Steve Simon @ 2019-11-08 12:42 UTC (permalink / raw) To: 9fans hi, i cannot find a plan9port maillist, so i am asking here. anyone using plan9port on osx? if so which mouse are you using? i am fighting with a magic mouse2 which, with the addition of the magicperfs app can do both scrolling and 3 buttons. sadly the middle button support is buggy an often misfires. anyone found better software, or do i have just go back to traditional mouse? -Steve ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 12:42 plan9port on osx Steve Simon @ 2019-11-08 14:19 ` Mat Kovach 2019-11-08 15:36 ` Aram Hăvărneanu ` (2 subsequent siblings) 3 siblings, 0 replies; 14+ messages in thread From: Mat Kovach @ 2019-11-08 14:19 UTC (permalink / raw) To: 9fans ----- Original Message ----- > From: "Steve Simon" <steve@quintile.net> > To: 9fans@9fans.net > Sent: Friday, November 8, 2019 7:42:48 AM > Subject: [9fans] plan9port on osx > hi, > > i cannot find a plan9port maillist, so i am asking here. > > anyone using plan9port on osx? if so which mouse are you using? i am fighting > with a magic mouse2 which, with the addition of the magicperfs app can do both > scrolling and 3 buttons. > > sadly the middle button support is buggy an often misfires. > > anyone found better software, or do i have just go back to traditional mouse? I use plan9port on MacOS at work daily (acme is my IDE). I have a use a Logitech trackball, which has three buttons. I'm not sure where my magic mouse landed after I though it. ; man 1 acme ``Simulated buttons For systems without a three-button mouse, the keyboard modi- fier keys can be used to modify the effect of the main mouse button. On Unix systems, the Control key changes the main button to button 2, and the Alt key changes it to button 3. On Mac systems, the Option key changes the main button to button 2, and the Command key changes it to button 3. Pressing the key after the button is held down adds the but- ton to form a chord, so that for example on Macs selecting text with the trackpad button and then typing Option without letting go of the button will cause a 1-2 chord, cutting the selection. On Mac systems, the usual keyboard shortcuts Command-C, -V, -X, and -Z invoke copy, paste, cut, and undo, and Command-Shift-Z invokes redo, as in other programs. Especially on Mac laptops, these keyboard shortcuts are typ- ically much less awkward than the equivalent chords. '' Should be helpful. I use that quite a bit, simply because using the additional buttons seems to be along with the rest of the MacOS apps I have to use. Mat ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 12:42 plan9port on osx Steve Simon 2019-11-08 14:19 ` [9fans] " Mat Kovach @ 2019-11-08 15:36 ` Aram Hăvărneanu 2019-11-09 19:51 ` Jeremy Jackins 2019-11-08 16:21 ` James A. Robinson 2019-11-21 1:22 ` Ethan Gardener 3 siblings, 1 reply; 14+ messages in thread From: Aram Hăvărneanu @ 2019-11-08 15:36 UTC (permalink / raw) To: 9fans https://www.contourdesign.com/product/contour-mouse/ -- Aram Hăvărneanu ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 15:36 ` Aram Hăvărneanu @ 2019-11-09 19:51 ` Jeremy Jackins 2019-11-09 21:58 ` Darren Wise 0 siblings, 1 reply; 14+ messages in thread From: Jeremy Jackins @ 2019-11-09 19:51 UTC (permalink / raw) To: 9fans This looks great, thanks for the tip. Found one on ebay for $30 (stores in Canada are selling it for CAD $120...) On Fri, 8 Nov 2019 at 07:37, Aram Hăvărneanu <aram.h@mgk.ro> wrote: > > https://www.contourdesign.com/product/contour-mouse/ > > -- > Aram Hăvărneanu ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-09 19:51 ` Jeremy Jackins @ 2019-11-09 21:58 ` Darren Wise 0 siblings, 0 replies; 14+ messages in thread From: Darren Wise @ 2019-11-09 21:58 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 1034 bytes --] Yeah me too, with regards to an eBay bid for an Contour mouse! Hope I win in the next few days. Devilishly stricking design, I could only find an large, right-handed model.. would have preferred a medium, right-handed but who cares as it seems to be a lovely mouse and a huge upgrade on my sloppy to-small boring £7 maplin own brand mouse but has lasted me years with no problems yet :D Awesome mention Aram & Jeremy :D On 9 November 2019 19:51:55 GMT, Jeremy Jackins <jeremyjackins@gmail.com> wrote: >This looks great, thanks for the tip. Found one on ebay for $30 >(stores in Canada are selling it for CAD $120...) > >On Fri, 8 Nov 2019 at 07:37, Aram Hăvărneanu <aram.h@mgk.ro> wrote: >> >> https://www.contourdesign.com/product/contour-mouse/ >> >> -- >> Aram Hăvărneanu > >------------------------------------------ >9fans: 9fans >Permalink: >https://9fans.topicbox.com/groups/9fans/Teef4e32e6f6c10de-Mf7950118728a95de31ebbca2 >Delivery options: https://9fans.topicbox.com/groups/9fans/subscription [-- Attachment #2: Type: text/html, Size: 1624 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 12:42 plan9port on osx Steve Simon 2019-11-08 14:19 ` [9fans] " Mat Kovach 2019-11-08 15:36 ` Aram Hăvărneanu @ 2019-11-08 16:21 ` James A. Robinson 2019-11-08 18:18 ` Xiao-Yong Jin 2019-11-21 1:22 ` Ethan Gardener 3 siblings, 1 reply; 14+ messages in thread From: James A. Robinson @ 2019-11-08 16:21 UTC (permalink / raw) To: 9fans I am running plan9port on my mac. I used to use acme with the https://codereview.appspot.com/6115053 patch for the trackpad on my laptop, but at some point that stopped working. I didn't care to dig into it at the time and switched to using the Alt/Cmd button modifiers. Currently since I'm not traveling much I'm using the Evoluent VM4RB VerticalMouse, which has 3+ buttons. On Fri, Nov 8, 2019 at 4:44 AM Steve Simon <steve@quintile.net> wrote: > > hi, > > i cannot find a plan9port maillist, so i am asking here. > > anyone using plan9port on osx? if so which mouse are you using? i am fighting with a magic mouse2 which, with the addition of the magicperfs app can do both scrolling and 3 buttons. > > sadly the middle button support is buggy an often misfires. > > anyone found better software, or do i have just go back to traditional mouse? > > -Steve > > > > ------------------------------------------ > 9fans: 9fans > Permalink: https://9fans.topicbox.com/groups/9fans/Teef4e32e6f6c10de-M7f073acf64051bcc74efd622 > Delivery options: https://9fans.topicbox.com/groups/9fans/subscription ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 16:21 ` James A. Robinson @ 2019-11-08 18:18 ` Xiao-Yong Jin 2019-11-08 19:18 ` James A. Robinson 0 siblings, 1 reply; 14+ messages in thread From: Xiao-Yong Jin @ 2019-11-08 18:18 UTC (permalink / raw) To: 9fans since commit 9af9ceca, the metal backend has (undocumented), Allow touch events to simulate mouse clicks: three finger tap for the middle mouse button; four finger tap for the 2-1 chord. In addition Ctrl/Alt/Cmd works as 1/2/3 button, so you can invoke 2-1 chord by pressing Alt and then Ctrl with your left thumb, while right thumb pressed on the trackpad. > On Nov 8, 2019, at 10:21 AM, James A. Robinson <jim.robinson@gmail.com> wrote: > > I am running plan9port on my mac. I used to use acme with the > https://codereview.appspot.com/6115053 patch for the trackpad on my > laptop, but at some point that stopped working. I didn't care to dig > into it at the time and switched to using the Alt/Cmd button > modifiers. Currently since I'm not traveling much I'm using the > Evoluent VM4RB VerticalMouse, which has 3+ buttons. > > > On Fri, Nov 8, 2019 at 4:44 AM Steve Simon <steve@quintile.net> wrote: >> >> hi, >> >> i cannot find a plan9port maillist, so i am asking here. >> >> anyone using plan9port on osx? if so which mouse are you using? i am fighting with a magic mouse2 which, with the addition of the magicperfs app can do both scrolling and 3 buttons. >> >> sadly the middle button support is buggy an often misfires. >> >> anyone found better software, or do i have just go back to traditional mouse? >> >> -Steve >> > > ------------------------------------------ > 9fans: 9fans > Permalink: https://9fans.topicbox.com/groups/9fans/Teef4e32e6f6c10de-M21898f4a20880bac0951843b > Delivery options: https://9fans.topicbox.com/groups/9fans/subscription ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 18:18 ` Xiao-Yong Jin @ 2019-11-08 19:18 ` James A. Robinson 0 siblings, 0 replies; 14+ messages in thread From: James A. Robinson @ 2019-11-08 19:18 UTC (permalink / raw) To: 9fans Oh that's very nice, I'll have to update and try it. Thank you for pointing this out! On Fri, Nov 8, 2019 at 10:19 AM Xiao-Yong Jin <meta.jxy@gmail.com> wrote: > > since commit 9af9ceca, the metal backend has (undocumented), > > Allow touch events to simulate mouse clicks: > three finger tap for the middle mouse button; > four finger tap for the 2-1 chord. > > In addition Ctrl/Alt/Cmd works as 1/2/3 button, so you can invoke 2-1 chord by pressing Alt and then Ctrl with your left thumb, while right thumb pressed on the trackpad. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-08 12:42 plan9port on osx Steve Simon ` (2 preceding siblings ...) 2019-11-08 16:21 ` James A. Robinson @ 2019-11-21 1:22 ` Ethan Gardener 2019-11-21 7:14 ` arnold 3 siblings, 1 reply; 14+ messages in thread From: Ethan Gardener @ 2019-11-21 1:22 UTC (permalink / raw) To: 9fans > i cannot find a plan9port maillist, so i am asking here. it's called plan9port-dev and it's on google groups: https://groups.google.com/forum/#!forum/plan9port-dev ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-21 1:22 ` Ethan Gardener @ 2019-11-21 7:14 ` arnold 2019-11-21 7:22 ` fgergo 0 siblings, 1 reply; 14+ messages in thread From: arnold @ 2019-11-21 7:14 UTC (permalink / raw) To: 9fans "Ethan Gardener" <eekee57@fastmail.fm> wrote: > > i cannot find a plan9port maillist, so i am asking here. > > it's called plan9port-dev and it's on google groups: > > https://groups.google.com/forum/#!forum/plan9port-dev Clicking on the link tells me I don't have access to the group. I reported something directly to Russ a few days ago, but didn't hear back... Thanks, Arnold ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-21 7:14 ` arnold @ 2019-11-21 7:22 ` fgergo 2019-11-21 7:49 ` fgergo 0 siblings, 1 reply; 14+ messages in thread From: fgergo @ 2019-11-21 7:22 UTC (permalink / raw) To: 9fans On 11/21/19, arnold@skeeve.com <arnold@skeeve.com> wrote: > "Ethan Gardener" <eekee57@fastmail.fm> wrote: > >> > i cannot find a plan9port maillist, so i am asking here. >> >> it's called plan9port-dev and it's on google groups: >> >> https://groups.google.com/forum/#!forum/plan9port-dev > > Clicking on the link tells me I don't have access to the group. > > I reported something directly to Russ a few days ago, but didn't > hear back... > > Thanks, > > Arnold https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!forum/plan9port-dev should look more friendly. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-21 7:22 ` fgergo @ 2019-11-21 7:49 ` fgergo 2019-11-21 7:57 ` Bakul Shah 0 siblings, 1 reply; 14+ messages in thread From: fgergo @ 2019-11-21 7:49 UTC (permalink / raw) To: 9fans On 11/21/19, fgergo@gmail.com <fgergo@gmail.com> wrote: > On 11/21/19, arnold@skeeve.com <arnold@skeeve.com> wrote: >> "Ethan Gardener" <eekee57@fastmail.fm> wrote: >> >>> > i cannot find a plan9port maillist, so i am asking here. >>> >>> it's called plan9port-dev and it's on google groups: >>> >>> https://groups.google.com/forum/#!forum/plan9port-dev >> >> Clicking on the link tells me I don't have access to the group. >> >> I reported something directly to Russ a few days ago, but didn't >> hear back... >> >> Thanks, >> >> Arnold > > https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!forum/plan9port-dev > should look more friendly. I'm not sure what's happening. I've tried this ^ again in incognito mode and it was (probably) the same error page Arnold reported. After several browser restarts and checks later sometimes the result is the topic list as expected, but sometimes it's the error page. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-21 7:49 ` fgergo @ 2019-11-21 7:57 ` Bakul Shah 2019-11-21 8:36 ` fgergo 0 siblings, 1 reply; 14+ messages in thread From: Bakul Shah @ 2019-11-21 7:57 UTC (permalink / raw) To: 9fans On Thu, 21 Nov 2019 08:49:32 +0100 fgergo@gmail.com wrote: fgergo@gmail.com writes: > On 11/21/19, fgergo@gmail.com <fgergo@gmail.com> wrote: > > On 11/21/19, arnold@skeeve.com <arnold@skeeve.com> wrote: > >> "Ethan Gardener" <eekee57@fastmail.fm> wrote: > >> > >>> > i cannot find a plan9port maillist, so i am asking here. > >>> > >>> it's called plan9port-dev and it's on google groups: > >>> > >>> https://groups.google.com/forum/#!forum/plan9port-dev > >> > >> Clicking on the link tells me I don't have access to the group. > >> > >> I reported something directly to Russ a few days ago, but didn't > >> hear back... > >> > >> Thanks, > >> > >> Arnold > > > > https://groups.google.com/forum/?utm_medium=3Demail&utm_source=3Dfooter#!= > forum/plan9port-dev > > should look more friendly. > > I'm not sure what's happening. I've tried this ^ again in incognito > mode and it was (probably) the same error page Arnold reported. After > several browser restarts and checks later sometimes the result is the > topic list as expected, but sometimes it's the error page. It is a private group. Ask to subscribe by sending email to plan9port-dev+subscribe@googlegroups.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] plan9port on osx 2019-11-21 7:57 ` Bakul Shah @ 2019-11-21 8:36 ` fgergo 0 siblings, 0 replies; 14+ messages in thread From: fgergo @ 2019-11-21 8:36 UTC (permalink / raw) To: 9fans On 11/21/19, Bakul Shah <bakul@bitblocks.com> wrote: > On Thu, 21 Nov 2019 08:49:32 +0100 fgergo@gmail.com wrote: > fgergo@gmail.com writes: >> On 11/21/19, fgergo@gmail.com <fgergo@gmail.com> wrote: >> > On 11/21/19, arnold@skeeve.com <arnold@skeeve.com> wrote: >> >> "Ethan Gardener" <eekee57@fastmail.fm> wrote: >> >> >> >>> > i cannot find a plan9port maillist, so i am asking here. >> >>> >> >>> it's called plan9port-dev and it's on google groups: >> >>> >> >>> https://groups.google.com/forum/#!forum/plan9port-dev >> >> >> >> Clicking on the link tells me I don't have access to the group. >> >> >> >> I reported something directly to Russ a few days ago, but didn't >> >> hear back... >> >> >> >> Thanks, >> >> >> >> Arnold >> > >> > https://groups.google.com/forum/?utm_medium=3Demail&utm_source=3Dfooter#!= >> forum/plan9port-dev >> > should look more friendly. >> >> I'm not sure what's happening. I've tried this ^ again in incognito >> mode and it was (probably) the same error page Arnold reported. After >> several browser restarts and checks later sometimes the result is the >> topic list as expected, but sometimes it's the error page. > > It is a private group. > Ask to subscribe by sending email to > plan9port-dev+subscribe@googlegroups.com Sure, but it's not a reason for either of these links to respond - at least for me -inconsistently. (Or at least until recently this was not the norm on google groups, though maybe things have deteriorated more.) Yes, this is off topic. ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-11-21 8:36 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-11-08 12:42 plan9port on osx Steve Simon 2019-11-08 14:19 ` [9fans] " Mat Kovach 2019-11-08 15:36 ` Aram Hăvărneanu 2019-11-09 19:51 ` Jeremy Jackins 2019-11-09 21:58 ` Darren Wise 2019-11-08 16:21 ` James A. Robinson 2019-11-08 18:18 ` Xiao-Yong Jin 2019-11-08 19:18 ` James A. Robinson 2019-11-21 1:22 ` Ethan Gardener 2019-11-21 7:14 ` arnold 2019-11-21 7:22 ` fgergo 2019-11-21 7:49 ` fgergo 2019-11-21 7:57 ` Bakul Shah 2019-11-21 8:36 ` fgergo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).