From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jonas Amoson" To: <9fans@9fans.net> Date: Fri, 19 Feb 2010 08:55:10 -0800 Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_5DD5_01CAB141.3DDB4010" Subject: Re: [9fans] How to mount a P9 partition? Topicbox-Message-UUID: d6f12cf0-ead5-11e9-9d60-3106f5b1d025 This is a multi-part message in MIME format. ------=_NextPart_000_5DD5_01CAB141.3DDB4010 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit > fossil/fossil -f /dev/sdD0/fossil -c 'srv fossil' Thanks for the advice! It complained about security, and have yet to learn how it works, but adding the option -A after 'srv' made it happier. So what I wrote was: fossil/fossil -f /dev/sdD0/fossil -c 'srv -A fossil' mount /srv/fossil /n/olddisk This seemed to work out very fine, but I soon relised that the content of /n/olddisk now was the filesystem on sdC0, instead of sdD0 as one might have expected? /Jonas <-----Ursprungligt Meddelande-----> From: Iruata Souza [iru.muzgo@gmail.com] Sent: 19/2/2010 3:48:35 PM To: 9fans@9fans.net Subject: Re: [9fans] How to mount a P9 partition? fossil/fossil -f /dev/sdD0/fossil -c 'srv fossil' this should post /srv/fossil as you want. then you can proceed to mounting as you did with the cd. On 2/19/10, Jonas Amoson wrote: > Hello! > > I am trying to access files that I have on a harddrive > on which the Plan 9 installation refuses to boot. I am > now booting from a new harddisk (sdC0) and would like > to mount the file system of the problematic disk (now > sdD0) in a directory (say /n/olddisk). I have succeeded > to mount CD:s (sdD1) by starting 9660srv and mounting > it from /srv: > > 9660srv -f /dev/sdD1/data > mount /srv/9660 /n/cdrom > > My guess is that I have to start a file server in a similar > fashion, and it does not complain when I write: > > fossil/fossil -f /dev/sdD0/fossil > > I was expecting some new entry named /srv/fossil that I > could mount in a directory, but that does not seem to > how it works. Running "ls /dev/sd*" gives the following: > > /dev/sdC0/9fat > /dev/sdC0/ctl > /dev/sdC0/data > /dev/sdC0/fossil > /dev/sdC0/nvram > /dev/sdC0/plan9 > /dev/sdC0/raw > /dev/sdC0/swap > /dev/sdD0/9fat > /dev/sdD0/ctl > /dev/sdD0/data > /dev/sdD0/fossil > /dev/sdD0/nvram > /dev/sdD0/plan9 > /dev/sdD0/raw > /dev/sdD0/swap > /dev/sdD1/ctl > /dev/sdD1/raw > /dev/sdctl >

_______________________________________________________________
SprayAffinity.se - Tr�ffa bara personer som passar dig! ------=_NextPart_000_5DD5_01CAB141.3DDB4010 Content-Type: text/html Content-Transfer-Encoding: 7bit > fossil/fossil -f /dev/sdD0/fossil -c 'srv fossil'

Thanks for the advice! It complained about security, and

have yet to learn how it works, but adding the option -A

after 'srv' made it happier. So what I wrote was:

fossil/fossil -f /dev/sdD0/fossil -c 'srv -A fossil'

mount /srv/fossil /n/olddisk

This seemed to work out very fine, but I soon relised that

the content of /n/olddisk now was the filesystem on sdC0,

instead of sdD0 as one might have expected?

/Jonas

<-----Ursprungligt Meddelande----->
From: Iruata Souza [iru.muzgo@gmail.com]
Sent: 19/2/2010 3:48:35 PM
To: 9fans@9fans.net
Subject: Re: [9fans] How to mount a P9 partition?

fossil/fossil -f /dev/sdD0/fossil -c 'srv fossil'

this should post /srv/fossil as you want. then you can proceed to
mounting as you did with the cd.

On 2/19/10, Jonas Amoson wrote:
> Hello!
>
> I am trying to access files that I have on a harddrive
> on which the Plan 9 installation refuses to boot. I am
> now booting from a new harddisk (sdC0) and would like
> to mount the file system of the problematic disk (now
> sdD0) in a directory (say /n/olddisk). I have succeeded
> to mount CD:s (sdD1) by starting 9660srv and mounting
> it from /srv:
>
> 9660srv -f /dev/sdD1/data
> mount /srv/9660 /n/cdrom
>
> My guess is that I have to start a file server in a similar
> fashion, and it does not complain when I write:
>
> fossil/fossil -f /dev/sdD0/fossil
>
> I was expecting some new entry named /srv/fossil that I
> could mount in a directory, but that does not seem to
> how it works. Running "ls /dev/sd*" gives the following:
>
> /dev/sdC0/9fat
> /dev/sdC0/ctl
> /dev/sdC0/data
> /dev/sdC0/fossil
> /dev/sdC0/nvram
> /dev/sdC0/plan9
> /dev/sdC0/raw
> /dev/sdC0/swap
> /dev/sdD0/9fat
> /dev/sdD0/ctl
> /dev/sdD0/data
> /dev/sdD0/fossil
> /dev/sdD0/nvram
> /dev/sdD0/plan9
> /dev/sdD0/raw
> /dev/sdD0/swap
> /dev/sdD1/ctl
> /dev/sdD1/raw
> /dev/sdctl
>

_______________________________________________________________
SprayAffinity.se - Tr�ffa bara personer som passar dig! ------=_NextPart_000_5DD5_01CAB141.3DDB4010--