Re: [9fans] exception / interrupt 14 again

["Woodruff, Richard" <r-woodruff2@ti.com>]

I got this same exception when trying to use 4th edition on my Dell Optiplex
GX300 (NTFS is on its first primary partition).  I originally used Partition
Magic to set up a FAT partition to put the install image in (as the 4th
edition didn't seem to be able to look into the NTFS partition).  After
adding a FAT partition and the install image, I got the "panic:
exception/interrupt 14" error.  When I removed this partition and put the
distribution on a CD I was able to go through the Entire install
procedure....Unfortunately, when it boots and I try an log in as a user it
now just streams the error message "wrenwrite failed: io/error".

On a side note the Plan9 partition utility seemed to corrupt the partition
directly behind it.  I also ran into a similar error with the 3rd edition
where it calculated the size wrong by 1 or something.  Looks like I may have
to dedicate a whole machine to make it go.

Regards,

Richard W.

"Artem Letko" <aletko@iname.com> wrote in message
news:<000d01c1f561$60105340$1c742544@rosele01.nj.comcast.net>...
> got one. can reproduce 100%. tried different floppies. very similar to
what
> kazumi iwane (kiwane@dream.com) reported on ?/12/2001. the machine was
> booting/working fine under r3.
>
> PBS... Plan 9 from Bell Labs
> ELCR: 8C80
> apm ax=f000 cx=f000 dx=0 di=1200 ebx=57a0 esi=c03e6
> using fd0!dos!plan9.ini
> dev A0 port 1F0 config 0C5A capabilities 2F00 mwdma 0007 udma 043F
> pcirouting: 8086/7112 at pin 4 irq 7
> found 9PCFLOP .GZ attr 0x0 start 0xf0 len 1168843
> .FLAGS=10246 TRAP=e ECODE=0 PC=80015b87
> AX a48003b7 BX 8003b784 CX 00000800 DX 00000000
> SI 8002dcc0 DI 8003b7a4 BP 8003b780
> CS 0010 DS 0008 ES 0008 FS 0008 CS 0008
> CR0 80000011 CR2 a48003b9 CR3 0000c000
> panic: exception/interrupt 14
>
>
> Art.
>