[9fans] Kernel Panic Trap after User prompt.

[9fans] Kernel Panic Trap after User prompt.

[Terry Bayne]

Hi,

I have plan 9 installed.  Used distribution downloaded today 17 June 00.

When I boot from a floppy or from the Windows NT boot selection menu I
have the same problem:

After I get prompted for a user, the kernel does a panic trap, spews a
bunch of numbers then stops.

Any ideas?

Thanks
Terry Bayne

Re: [9fans] Kernel Panic Trap after User prompt.

[Andrew Pochinsky]

I had the same problem after installing June 17 distribution using the
floppy image generated for the June 6 distribution. After dutifully going
to plan9.bell-labs.com asking for a new install floppy, the problem
disappeared.

--andrew

   Hi,

   I have plan 9 installed.  Used distribution downloaded today 17 June 00.

   When I boot from a floppy or from the Windows NT boot selection menu I
   have the same problem:

   After I get prompted for a user, the kernel does a panic trap, spews a
   bunch of numbers then stops.

   Any ideas?

   Thanks
   Terry Bayne

[9fans] Kernel Panic Trap after User prompt.

[Terry Bayne]

Hi,

I have plan 9 installed.  Used distribution downloaded today 17 June 00.

When I boot from a floppy or from the Windows NT boot selection menu I
have the same problem:

After I get prompted for a user, the kernel does a panic trap, spews a
bunch of numbers then stops.

Any ideas?

Thanks
Terry Bayne

Re: [9fans] Kernel Panic Trap after User prompt.

[Russ Cox]

	After I get prompted for a user, the kernel
	does a panic trap, spews a
	bunch of numbers then stops.

The message immediately after "panic:"
would be quite useful to know.

What did you type at the "root is from:"
prompt, and what was the default in []s?

Russ

Re: [9fans] Kernel Panic Trap after User prompt.

[Terry Bayne]

[This followup was posted to comp.os.plan9 and a copy was sent to the
cited author.]

In article <200006191313.JAA22041@cse.psu.edu>, rsc@plan9.bell-labs.com
says...
> 	After I get prompted for a user, the kernel
> 	does a panic trap, spews a
> 	bunch of numbers then stops.
>
> The message immediately after "panic:"
> would be quite useful to know.
>
> What did you type at the "root is from:"
> prompt, and what was the default in []s?
>

Ok, here is what I saw on the screen followed by a lot of hex numbers.

----------------------------------------------------
PBS...Plan 9 from Bell Labs
using sdD0!9fat!plan9.ini
Ether#0: NE2000: port 0x240 irq 10 addr 0x4000 ......
found 9pcdisk.  attr 0x0 start 0x49 ......
entry: 0x80100020
cpu0: 501MHz AuthenticAMD AMD-K6-2 CPU ID AX 0x0586 DX 0x8021BF
#l0: NE2000: NE2000: port 0x240 irq 10 addr 0x4000 ......
dev A0 config 045A capabilities 0b00 mwdma 0007 ....
dev A0 config 0040 capabilities 2f00 mwdma 0007 ....
dev B0 config 2f00 capabilities 2f00 mwdma 0407
24347 Free Pages
97338K Bytes
382188 K Swap
#A: no response #ff
root is from (il,local) [local!#S/sdD0/fs] << Picked the default here
user:[] 					  << Tried default and glenda
kfs...boot:nop...time...
init starting /bin/rc
panic crda write 16382 to 16384
cpu0: Exiting
panic: ilock: no way out: pc 80155c3f
--------------------------------------------------------

Re: [9fans] Kernel Panic Trap after User prompt.

[Terry Bayne]

[This followup was posted to comp.os.plan9 and a copy was sent to the
cited author.]

In article <200006191313.JAA22041@cse.psu.edu>, rsc@plan9.bell-labs.com
says...
> 	After I get prompted for a user, the kernel
> 	does a panic trap, spews a
> 	bunch of numbers then stops.
>
> The message immediately after "panic:"
> would be quite useful to know.
>
> What did you type at the "root is from:"
> prompt, and what was the default in []s?
>

Ok, here is what I saw on the screen followed by a lot of hex numbers.

----------------------------------------------------
PBS...Plan 9 from Bell Labs
using sdD0!9fat!plan9.ini
Ether#0: NE2000: port 0x240 irq 10 addr 0x4000 ......
found 9pcdisk.  attr 0x0 start 0x49 ......
entry: 0x80100020
cpu0: 501MHz AuthenticAMD AMD-K6-2 CPU ID AX 0x0586 DX 0x8021BF
#l0: NE2000: NE2000: port 0x240 irq 10 addr 0x4000 ......
dev A0 config 045A capabilities 0b00 mwdma 0007 ....
dev A0 config 0040 capabilities 2f00 mwdma 0007 ....
dev B0 config 2f00 capabilities 2f00 mwdma 0407
24347 Free Pages
97338K Bytes
382188 K Swap
#A: no response #ff
root is from (il,local) [local!#S/sdD0/fs] << Picked the default here
user:[] 					  << Tried default and glenda
kfs...boot:nop...time...
init starting /bin/rc
panic crda write 16382 to 16384
cpu0: Exiting
panic: ilock: no way out: pc 80155c3f
--------------------------------------------------------